How to install piston rings and not break them. Oil ring explanation POV installation!

[@How2Wrench]

You may enjoy this video Shane did on the 3 piece oil ring too. kzbin.info/www/bejne/hqq4m6mXhsZlnpI You rock for commenting! We will let Shane know! Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@onelove8509]

I do not consider myself a better mechanic than anyone,but i enjoy watching videos like this that make perfect sense to me,and i would like to encourage other mechanics to pay attention to detail to these things,i really appreciatte videos showing real proffesionals showing us how things are done properly,thanks.i'm very pleased to have watched this video.i will keep it as a reference of a real expert

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@scruffy4647]

Great video. Another thing to remember about the oil rings is to get the correct size. I made that mistake on my shovel rebuild. The machine shop bored 20 over and I bought the pistons to match. The rings that came with the pistons were not the moly compression rings so I bought a new set of rings. The oil expander ring was not the right size (narrower than the width of the piston oil slot). I put the rails on like your suppose to. The bike ran great at first but I was soon fouling my plugs consistently. Couldn’t figure out was was going on. I thought my valve seals were the culprit. I finally disassemble the engine and realize what a dumb ass mistake I had made. The rails were climbing on top of the lips of the expander and causing the fouling.

[@How2Wrench]

Hi Scruffy. TY! You may enjoy this video Shane did on the 3 piece oil ring too. kzbin.info/www/bejne/hqq4m6mXhsZlnpI You rock for commenting! We will let Shane know! Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@davidhughes2755]

This is by far the most detailed and well explained video I've seen. Im getting ready to strip down and re build my 2007 VW transporter 2.5 diesel engine. This video has given me miles of insight on refitting or replacing the rings. My problem is on the crankshaft and have to replace it and bearings but I'll be checking the rings also. Thank you so much 👍

[@How2Wrench]

Thanks David! Shane videos on how to measure crank plain bearings too! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@deliverance3767]

Rebuild my first engine watching your vids.I still rewatch from time to time to recoop

[@How2Wrench]

Nice....We are here if you get stuck...🙌 🏁 Noticed your a subscriber, thank you for SUBSCRIBING! Love seeing our subscribers comment on how the video helped! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@bryancallado4395]

Wow, I've been at this oil ring assembly for 2 hours with no success but after 2 mins I got it on the first try. Awesome vid!

[@How2Wrench]

Thanks for commenting and adding value to our community! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzbin.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

[@bryancallado4395]

@@How2Wrench just did, thanks and keep up the good work!

[@richardkey4289]

Oh wow, I'm putting a 1 mm oversize Namura piston in a Suzuki LT230S, hell of a fight w/ oil control ring, now I know what's going on; compression rings had;end gap of .006", I filed them to just over .014", carefully deburred ends, but oil ring is not playing nice w/ cylinder, I will attack it again tomorrow, & complete & defeat the dilemma.thanks for this vid

[@mikeadams5432]

Shane, doing a 98" big bore. S&s and have to grind piston rings for end gap. Nerve racking, no one has a piston ring grinder. So i made my own.

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@jameshester3831]

It's called a file

[@conorprovan9435]

Thank you this series it was very helpful in doing my cr50f to 88 kit . Put it all back together and first kick, I couldn't believe it it fired right up and the torque difference was unexpectedly a good thing! Your detailed tear down was a big help.

[@How2Wrench]

Glad it helped! You rock for commenting! We will let Shane know! Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@sparklingsams3155]

Finally a proper zoomed in video. Thanks mate

[@How2Wrench]

Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@robjenkins9450]

I'm about to fit a new set of rings and admit I hadn't spotted the step in the oil scraper ring before now, thanks for highlighting this. Some my find a useful tip for fitting rings is to carve up some old feeler guages and use the 6 - 8 thou blades as vertical shields around the piston. This will help you walk the rings around without them dropping in the wrong grooves.

[@How2Wrench]

Cool. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@qichengparts8173]

nice video, not only learn how to set it up, but good service can be provided. good luck and thank you the author..

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@kevinferrell7033]

1991 Chevy Silverado 5.7 135.000 miles My truck just started smoking out of 1 side. Drivers side, Heavy Blue smoke when u rive it up. Started doing this after i changed oil with 4 quarts oil plus 1 quart Lucas Oil stab.. I also changed out 1 injector tbi throttle body with New/reman. injector. Also replaced oil pressure sensor.. Now it started smoking blue smoke out of just one side. IT also still running rich/flooding but no misfire or loss of power i dont think but i havent road it yet. I think i make have a broke oil ring but hoping not. All help appreciated

[@How2Wrench]

You could always try swapping the old parts back and see if you by chance got a "bad" new part. Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@lenmorris4152]

The method shown will work. However, it is also clumsy, time consuming and will scratch the piston ring lands or the piston skirt. Using a screwdriver or whatever to recover an OCR rail from the top or second groove is an absolute no-no. The girls on the assembly lines at the piston plant I worked at would flick a three piece ring on a piston in less than 20 seconds. No marks on the piston, all gaps aligned. The trick is simple. Install the expander. Push one end of a rail into position say above the top of the expander, twist it like a band saw blade and lay it into the groove. Do likewise with the bottom one. No over expansion whatsoever and they are designed to be installed in this manner.

[@tomashton1781]

cross hatch patterns make the rings seat plus the gap moves around, they dont rotate but they do move around

[@How2Wrench]

Rotate but don't move around? Can you clarify please? Thank you for taking the time to comment! Hit that subscribe button please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@sagitario12ish]

Diferent positions for diferent models, for what models is these ring positions that you show us?

[@How2Wrench]

I'm sorry I don't recall as this is a really old video and was more about teaching students "skill sets" and introduction to ring installation. 99% of all models used the 3 point and most manufactures have gone to the four courners. The best best is always to trust the service manual for your year make and model. If your this deep in the engine, you need it for correct torque specs anyway right? 😊 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@barnycanuck6234]

Ever try 3 thin sections of old feeler guage to put the rings on, rings slide over without any bending and minimal stretching

[@How2Wrench]

Nice. I have not but will try it out. Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzbin.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

[@junkyardjedi7706]

Thank you, I am installing a S&S 1250 kit on Sportster this weekend, I will try that method and comment after..

[@guintoramcesv.9675]

Hi sir! Just asking if the problem of my car is piston rings or valve seals. It emmits whiteish and bluish thick smoke in my exhaust. Sometimes my oil cap and dipstick have smoke too. What is the problem sir?

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@endofthebarscreamer6998]

What happens when you grade the rings?...before you put the pistons in The cylinders?

[@MiguelRivera-xp2pq]

I Just love thorough explanations regardless how long it makes the video

[@How2Wrench]

Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com

[@tufoba1002]

hello buddy, can you tell me please which clearance is recommended ? I'm in the process of adjusting the cylinders and pistons on my 74" shovelhead and I'm not sure about the pistons clearance. which at alu factory and which at forged pistons. I thank you in advance for the tips. greetings mike

[@nwags357]

at 13:09 in the video, you talk about the expander facing up on the gaps. If my piston has a solid rail and the piston has oil holes drilled in does that mean I can install that expander up or down? I mistakenly installed the expander facing down and I am wondering if I need to disassemble it.

[@ANUJSHARMA28292829]

Do you please guide me about receprocating air compressor book

[@bennn9657]

hello, I am putting together a briggs&stratton 21B807 engine and I have a problem because there is an arrow on the piston. How to point it up towards the magnet wheel??

[@RonHuizer]

Great vid indeed. The documentation of my original harley pistons shows the spacer ring positioned the other way around than shown in this video. Luckily I still had my old pistons for reference, and they also are positioned the same way as shown here. -1 for harley documentation I guess.

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@lekonarodrick6821]

Waooooo.u are a good teacher. Wish u were my teacher

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@astore3757]

Hello, What's the manual that you show in the video? Thanks.

[@How2Wrench]

That's an OEM Hd service manual. Consider a donation here: www.paypal.me/how2wrench Thank you in advance for giving back! He looks forward to working with you directly! Have you hit that subscribe button yet? :)

[@chouchenejawhar]

it's just perfect , i think we can do that , the ring instalation for car also?

[@How2Wrench]

Absolutely...Much of motorcycle technology came from advances in auto design. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@Zerk_Ziegler]

At 11:58, aren't the yellow markings on the piston crown, corresponding to gap locations of the Bottom oil rail (B) and Top oil rail (T), reversed when compared to the diagram in the manual (Bottom oil rail --> gap at location 2; Top oil rail --> gap at location 3)?

[@How2Wrench]

You are correct. Good eye....😁...Thanks for subbing...

[@How2Wrench]

I made a pinned comment of your finding....ty

[@Zerk_Ziegler]

@@How2Wrench Now "joined" as well. Thanks for all the great content over the years.

[@How2Wrench]

@@Zerk_Ziegler Appreciated...and thank you...

[@jaiho314]

Great video ! well done !! I would appreciate if you can make a video on how to do it on AUDI A3 1.6 as this is my car and suffering from oil burning issues.

[@How2Wrench]

Thanks for commenting and adding value to our community! We don't currently have an Audi in our fleet. We do have many videos teaching skill sets that would apply or we can work with you one on one. Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzbin.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

[@trillrifaxegrindor4411]

you could be doing a lawn mower engine or a big rig engine and it will be the same thing.take them off and put them on in reverse order,take pictures and pay attention

[@Kryabenok]

I have 2002 sportster 883 is the ring gap layout will be the same on my bike?

[@guidosarducci3047]

some times theres no dot or mark of any kind. my rings do have an inner side chamfer or beveled edge on one side. what then? its the one piece of info that i dont have.

[@How2Wrench]

I wouldn't want to guess what you have. Contact me email with photos if you need more help. Link on website. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@grasshopper2492]

Can a bad crank seal on a two stroke can it run like crap?

[@speedydry]

Yes sir

[@richardkey4289]

A bad crank seal can leak air ( ignition side) or oil( clutch side) , or both.some, not all, machines can allow seals to be removed ,carefully, without disassembling engine

[@dynamite8037]

Hey man thanks a ton. Starting a project and haven't done one in about 15 years. Your video is focused,clear and very understandable with great info that came back to me. Question if you could or know of hand, got another project going for my kid on one of those 2002 Ktm 50 Sx senior liquid cool. Was about to instal a Wiseco piston/top end kit and noticed the Rod has some play. Not up and down but side to side (never touches crank but kinda close). I know there's supposed to be some play but how much is in the safe zone? No manual came with it and no luck finding it. Thanks a ton man and subscribed.

[@siphamandlabuthelezi8099]

....hi man my rings on my Polo need to be changed but now the a WV are saying in order to do it properly and have no future issues i have to change cam belt, hip bearing, cam shaft, rear main seal and so on, and so on. Basically engine overhaul by the looks of things, because, and i quote "once you open the engine you just gotta replace everything". Is VW try to drain my pocket or is this valid.

[@fernandobiondi1256]

Thank You for such interesting and enlightening lessons. I have a doubt going round my head from long time ago = Do rings rotate while engine is running? Do they retain their relative position after, lets say, 40k miles? Thank You for your kind answer....... and keep on wrenching!!

[@How2Wrench]

Thank you. I struggle "seeing" the rings rotating but was told years ago they do. I think so fresh research would be a good idea. I have a theory but sure would be great to know. The engines I build don't come back in s short time (good thing) to check. Head over to the new website and subscribe to the newsletter to never miss a video or newsletter! www.how2wrench.com/contact/ Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW

[@lenmorris4152]

Dear Fernando, I doubt you will read this as you asked your question over a year ago. However this might help others. Rings do rotate and often faster than most people might realise. The driving force is the cross-hatch pattern on the cylinder bore after honing. Obviously it should be symmetrical but we do not live in a perfect world and it will be skewed one way or the other. Add to this the different lubrication conditions and temperatures between the top, second and oil control rings and you can see that they will all rotate at different rates. Hence the fallacy of setting gaps at 120 degrees on installation. Note the position of ring gaps on pistons you remove from an engine. You will find they are all over the shop. As a final comment, why do manufacturers of two stroke engines (where the inlet ports are in the cylinder bore walls) find it necessary to put a peg in the piston ring groove at the gap location? The answer is simple. So the rings cannot rotate and the free ends pass over the ports causing breakage. Rings do rotate. In a good engine it should be a slow process. In a bad engine it can be very quick causing nasty side wear.

[@JAMESONLUV]

Good evening sir please how can i get the workshop manual thanks?

[@How2Wrench]

Google Trade bit service manuals. We find many there in PDF form cheap. Glad it helped! You rock for commenting! We will let Shane know! Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@slawekh7862]

Hi. cau you tell me if it is possible to replace a piston rings without grinding a cylinder surface?

[@richardkey4289]

You can put new rings in a cylinder without boring or honing, but the cylinder will wear the rings down in uneven places.sometimes you can hone the cylinder, but if it has lots of hours on it, it will be worn .best to have measurements taken if possible, then decide on putting new rings in.

[@Jimo225]

if you can get the heads off the engine and the oil pan without removing the block from the truck can you install new rings without taking the engine out of the truck?

[@How2Wrench]

I'm not an auto expert, but I don't see why not. You don't have as controlled environment for keeping clean but you physically should be able too. I was teaching in Africa last year and watched techs rebuilding engines in the dirt! Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@daveyt4802]

Wow, learn something every day! Just ruined a piston because of this. :(

[@How2Wrench]

Bummer, thanks for checking us out. Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My KZbin has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com

[@TEXAZPITBULL]

Hey bud am try to do a 2006 Honda Forman 500 if I take the piston out do I have to set a time on it again

[@joeydecoursey3759]

Hey quick question the oil expander ring does s it matter if the expander ring goes in upside down are they like one way kinda deal. The reason I'm asking is I bought my sons bike and took engine apart it wasn't working very good and I noticed the expander oil ring was in upside down

[@How2Wrench]

Hey Joey. It sure can on some models. Sounds like you could really use one on one with Shane. Let me try and see I can catch Shane to answer quick. He is currently at an extended stay in Japan training students this winter. We are just the social media team. Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service. Here is how to get in! * Join here: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt

[@michaelfrancis3261]

Excellent Video as always..my question is, is there anyway to test you piston rings after honing your cylinders walls. I did a leak-down test on a few of my cylinders and found that a few of them were low 20 percent leakage. the leak down showed that the air was coming from the crankcase. so i took them out and hone out all the cylinder that were low. the pistons and rings are now back in which brings me back to my question above. thanks for your feedback

[@How2Wrench]

Absolutely. The are multiple measurements and visual inspections. I can personally walk you through it. Thank you for the note and kind words. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back. * Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/ * Simple donation to say "KEEP IT UP" May you have a great day and... www.paypal.me/how2wrench Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/ Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU

[@freedomlover8525]

i am rebuilding 1981 honda xl185. i ordered a 20$ piston and had the cylander done to fit. then i realized i maybe should've got a better piston than i did. its only .15 over stock. should i get a better piston or use what i have. i don't wanna blow my bike up after all that work. whats your opinion on how to proceed.

[@How2Wrench]

You're in luck. I do offer personal service to back up what's missing from a video to actually fix your specific problem. I do work on donations for my time and possible research. Good news is its CHEAP! For my time would mind becoming a member of my website? It comes with a free HOW2WRENCH “Keep Wrenching” t-shirt or 20 mins of techline and that will cover my time to assist you so we both benefit. So to have me personal cell phone number to put in your phone as your direct info and how to coach, sign up now! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of or learning community. Link to membership: how2wrench.com/product/membershipmembers-onlymembers? If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Direct link to services: how2wrench.com/product-category/tech-lineservice-callminutes/ Live Chat is great for you to actually show your specific issue! Donation link: www.paypal.me/how2wrench

[@averypavlik7812]

can you just leave the piston in the engine, and assemble it by putting the bottom ring in first?

[@How2Wrench]

We are just the social media team. Shane has a solution for you. You can use his techline and he will tell you how to do it or ship it to him. He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line. The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt

[@joeelias2515]

What's the ideal measurements for the gaps between the ends of individual rings when inserted inside the cylinder plus what's the ideal clearance around a piston that is inserted inside a cylinder? Someone help provide answers

[@How2Wrench]

Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My KZbin has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com

[@davidgilmour9790]

.002-.004 thousands per inch of bore 3 inch bore .006-.012 thousands

[@joeelias2515]

@@davidgilmour9790 thanks beyond measure, I highly appreciate your time and effort, keep up the good work

[@joeelias2515]

@@davidgilmour9790 does this rule apply to the clearance between a piston and the bore or cylinder itself? Thanks

[@omarizubeir5537]

Nils Schinken, hello, my XT600 emits a lot of smoke and I tried replacing the ring piston and the calf seal but it still smokes, what can be the problem?

[@How2Wrench]

Yo! We just run the social media.....Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a channel member please reply back with your KZbin handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!

[@plusblood5101]

Amazing instructor

[@How2Wrench]

Glad you think so! We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@williamlegodi910]

my problem is ring number 2 is looking up or town?

[@phillipkramer1897]

What is the difference between the sides of the rings and if you were to install one upside down? I have only gotten inside small engines in which the rings have a preset gap which makes that practically fool proof. Wonder why Husqvarna, Stihl, Echo, and so on have something that vehicles don't there. Can't say but I would expect car and motorcycle's heads be more advanced if that piece matters even. Im only a hobbist and find the subtle differences between different types of engines interesting. Thanks for the great video

[@MrJohnboe]

Great detailed video that was very helpful, but noticed one error at 11:59 others may have mentioned below, the top and bottom rails (and your marks) are backwards from the manual shown. Probably doesn't matter though. And I have a question. I'm installing new Wiseco 0.01" overbore 103 pistons on my 2008 HD Electra Glide Classic. Contrary to what you show, I've seen a possibly older manual in a FixMyHog video, that puts the #5 top compr ring by the intake and the #4 2nd compr ring at the exhaust, with position 4 not being used and position 1 only being used for the oil separator ring (vs by 1 AND 5). Is your method the most recent and do you recognize the method FMH is using? The bike they were working on may have been an 88 ci going to a 96 ci but that doesn't necessarily mean it was an excessively old video as they could have done that this year. But my dealer's manual is from 2011 and it agrees with your method and looks like your opened manual page. The Clymer manual I have does something different again though I'm not following that as it's too vague and actually made me lose faith in Clymer (perhaps unfairly as it may not matter as much as Harley says). They have the top compression ring facing the intake or exhaust - they don't specify but I'll call it the intake - the 2nd compression ring facing to one side I'll call the left, the lower rail facing what I'll call the exhaust, the top rail facing the right, and oil separator ring gap not even distinguished where it goes.....the gist is to keep them all separated but strange no mention of the separator ring. Also disturbing is no mention of any of the oil ring assembly details/concerns you mention which is why your vid is so important. FINALLY, Wiseco's directions are totally nonsensical as they have the piston pin axis going front to back vs across. Maybe it's a generic drawing and other engine types like inline 4's or v-4's or boxers etc. do so. They don't mention intake or exhaust but say the top ring gap is at the rear, 2nd to the front, and top/lower rails and separator ring gaps about 60 deg apart away from intake/exhaust if you know what I mean. Again doing what amounts to the same thing. Any idea why so many different methods and does it really matter? Does Harley's manual mention the details you do with the oil rings like the overlap (Wiseco does, Clymer doesn't) and 'stacking the sandwich' properly? Regardless I'm heeding your advice obviously. Another contradiction is Wiseco has a sheet saying twin cams are 0.04" ring gap per inch of bore so about 0.0155" for my bore. They say 0.015" for both top and bottom compr ring. But their generic directions say you can get top ring flutter if you don't have a larger gap on the 2nd compr ring than the top. I'm going by their TC HD engine specific directions as thankfully it's a lot simpler than filing down the 2nd ring to be larger. Dealer says it doesn't matter too and they say about 0.015" is fine. But Harley manual says top and 2nd also have different wear allowances and the min is more on 2nd than on the top. So they must agree with this top ring flutter idea but then Wiseco and my dealer do not. Confusing! Is it worth worrying about and when setting new rings do you in fact file the 2nd one down a bit? BTW the Wiseco piston kit came out to 0.015" in my bores. Thanks in advance (forgot to mention Wiseco generic directions say 0.04" gap/inch is for ATV/PWC/snowmobiles/dirtbikes and 0.05" for most street bikes......yet the TC HD specific directions imply 0.04" as it comes to 0.015" top and bottom).

[@How2Wrench]

I'd be glad to help Bob. Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Still have questions? Coach Conley provides tech help and works one on one! His KZbin and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance! Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!

[@trackerbuckmann1627]

I'm trying to find piston rings, engine bearings and a seal kit for a 1986 Honda shadow VT1100. it's hunt and peck on ebay and the bearings I ordered turned out to be used. is there a good source you know of that has new parts?

[@gamesbok]

Bearings are usually standard. Engine designers work around bearings available from suppliers. If you can find the specification, or possibly just the measurements a supplier like SKF or GKN should be able to help.

[@How2Wrench]

Yes. Dealers have the ability to do a search on the Honda database looking of stock at other dealerships. Problem is they won't offer it usually as they are afraid to send business out. I smart dealer would take your money and order the parts in from the stocking dealer and you would never know the difference. Like this tip? Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com

[@leopoldhjorleifsson9487]

I will be replacing the pistons in my L6 4.0L Jeep Grand cherokee soon, will this information be helpful? the only thing i am worried about are the piston rings as i have never done that before. do you have any advice? Greetings from Iceland :)

[@How2Wrench]

Hi friend. I’m the Social Media Manager here. I'm going to tackle this for you as he just had a similar question from another fan on "if this works on most all pistons". Hi answer was: Yes, absolutely. I can't express enough how important it is to have a service manual handy for exact model specific information you will need if this far in the engine anyway. That’s a good question for Shane. He gets hundreds of requests a day and starts each day answering MEMBER or donation support questions first and then if there is time he will try to circle back before heading to the shop for customer work. Want faster response times? Join link below. Thank you for commenting. Want more benefits? -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@MyoutdoorsHuntingFishing]

what could happen if you don't get the gap set away from the oil drain holes ?

[@davidgilmour9790]

Likely cause more blow by and oil burning

[@rogervest2338]

what happens if you forget to mark pistons/

[@Tactical_Wars]

Nothing

[@ajaydevdwal]

What happens if piston ring not install properly...?

[@How2Wrench]

A lot can go wrong...You're in luck. I do offer personal service to back up what's missing from a video to actually fix your specific problem. I do work on donations for my time and possible research. Good news is its CHEAP! For my time would mind becoming a member of my website? It comes with a free HOW2WRENCH “Keep Wrenching” t-shirt or 20 mins of techline and that will cover my time to assist you so we both benefit. So to have me personal cell phone number to put in your phone as your direct info and how to coach, sign up now! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of or learning community. Link to membership: how2wrench.com/product/membershipmembers-onlymembers? If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Direct link to services: how2wrench.com/product-category/tech-lineservice-callminutes/ Live Chat is great for you to actually show your specific issue! Donation link: www.paypal.me/how2wrench

[@georgekolotouros230]

ajay devdwal a lot of smoke come out of the muffler because the orientation of the rings are not correct .

[@joeelias2515]

ajay devdwal simple! The engine too won't work properly, period!!!!

[@يسرىعبدالكريم-ه6ه]

I have a Hyundai Santa fe 2005 2.7L 120.000 Mi , the timing belt is Broken! I want to Bent Valves, and What About The piston rings, Do I change it? There are some said ! Must be changed .

[@How2Wrench]

The timing belt does not affect the pistons rings and other tests like compression or leakdown will determine the ring condition with120,000 miles. Some car engines have clearance built in for when the timing belt breaks there is room and the valves do not bend...others don't have the room and will bend (every motorcycle made I believe!) Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My KZbin has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com

[@يسرىعبدالكريم-ه6ه]

Thank You for Reply They are said when Lapping a Valves , There is pressure on the old piston rings and ,

[@cya3651]

HELP...i followed your video to install my piston rings. Since the new ring gaps are wider then the stock, i installed as they are. Top and 2nd (Old =0.12 , New = .020) Stock single oil ring = .009,, New comes with 3 oil ring = 0.020. The expander does but up. i ensured it moves/turns once installed. After the break-in period, engine started making noise like the piston rings were scraping the cylinder walls. I took off the cylinder head and sure enough all six cylinders show signs of scraping. The cross hatch on the left and right side of all six cylinders have become smooth. What could be the problem that's causing the scraping of the cylinder walls since the NEW ring GAPS were much larger then the stock?

[@How2Wrench]

Hey there...we grabbed Shane quick and he said that .020 was way to big and he would need more time than a quick reply to get you the info you need. That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it! Make it a great day! The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt

[@MrJohnboe]

I have another seemingly strange situation with piston pins I'm going through right now. My stock 103 (SE kit on my 96) piston pins were hard to get out and needed a punch. The Wiseco's slide in smooth into their bores....is it normal that HD pistons/pins are that tight vs Wiseco? The machine shop is top notch and sent me a matching set of VT2791 Wiseco pistons (replaces VT2763), rings and piston pins with circlips. So I doubt they sent me the wrong pin. I could re-use my HD pins in my Wiseco's I suppose but would rather not. Which leads me to another question (who knew it was this complicated?). The Wiseco circlips seem very hard to spin when in the groove. They get installed with the opening pointing near the pry recess pointing down and I understand the gap must point up. I very nearly gave up for fear of dropping/scratching the piston or damaging the rings I'd just so carefully installed. I barely got it to move a millimetre. It must have been an hour of fighting. I finally resorted to a hammer and screwdriver but that shouldn't be necessary. One finally move a bit at a time with some taps to the end of the screw driver while the other one only by getting at a weird angle and hitting the side of the screw driver blade. I finally got both pointing upwards and glad I did as I don't want to lose a circlip and have the pin come out (both terrible situations). But the stock ones must be a lot easier to spin i.e. are not as stiff/tight. Ironically the Harley piston pins are super tight requiring a punch and hammer when the Wiseco's slide smoothly right in there (but still don't rock around at all), but it's the other way around for the circlips I'm sure just to confuse me personally. My worry now is the second circlip when I mount the pistons on the conn rods.....the above drama was just while on the bench so optimum conditions. No I don't have a $150 circlip installer but see most people on youtube and even FMH uses just a screwdriver and fingers. I'm re-thinking that now and should maybe by one. The above question is less urgent at this point than the below one about the ring end gaps and gap positions. I also realize you have a paying site but I'm already a member at FMH and they haven't answered one question I asked a year ago nor this very question yesterday. Maybe next year I should pay you instead of them even though I do love their site and videos.....I think yours are superior detail wise. The things you mentioned about that oil separator ring and top/bottom rails were mostly ignored by them (and Clymer and possibly even by Harley in their own manuals).

[@How2Wrench]

Hello friend! Still have questions? Coach Conley provides tech help and works one on one! His KZbin and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance! Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!

[@fashionstreet1]

Great tutorial video here I have a gy6 150cc scooter motor will this piston ring procedure have anything to do with the engine seizing up or turning over??

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@25ybot]

what if there isnt any kind of markings

[@arunayuven2102]

Everyone has his own way of installing rings in the piston

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@victorcarmona8606]

Hi shane, these videos are awesome and I'd like to take a course, mi problem is I' dont undersand the english language, I speak a little. there should be a way to translate it to spanish. Greetings frm Mexico.

[@How2Wrench]

Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com

[@ErickochiengOsuri]

How will you noticedthe rings are wrong

[@mohammadziaekhlassi263]

Hello Hello my .sir. thanks your channel Ihave problem please help me how to setting rings Gap on the piston motorcycle CG 125 please help me thanks

[@How2Wrench]

That surely is a question for Shane. We try to respond to these questions but with 700 videos on here its hard to keep up with the demand of over 400 requests a week for “a quick answer” it's just become hard to manage in a timely manner. Good news you can catch him directly. You know him from his videos, no shortcuts on answers so he wants you to get everything you need. If looking for technical help, business collaboration call him directly @ [phone] Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench Thank you in advance for giving back! He looks forward to working with you directly! Have you hit that subscribe button yet? :)

[@88Frank]

Very helpful video, thank you

[@How2Wrench]

Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@How2Wrench]

Great eye by channel sub @Zerk Ziegler At 11:58, T and B are flipped....👍

[@How2Wrench]

That book is the OEM Harley service manual. Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@texl4499]

You are a smart man.

[@How2Wrench]

Glad it helped! You rock for commenting! We will let Shane know! Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@proteusmacapagal1453]

hello sir.. can i ask if that's okay to use flat head piston? i ordered china brand with the flat head piston

[@How2Wrench]

Many factors to determine the best piston. Not a quick answer. Good news, I can help though. You can email me the details and get a detailed response back! Yup....:) Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Still have questions? Coach Conley provides tech help and works one on one! His KZbin and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance! Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!

[@3544S]

Shane, I wish you had a USB Port on the back of your head, so I could download all the knowledge stored on your brain, lol. I love these videos, I always learn something new.

[@How2Wrench]

+3544S Thank you and please share!

[@How2Wrench]

Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com

[@dellstudio10]

Great informative video with excellent explanations. Thank you!

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@daveharryman6390]

you mean ring compressor smashing them in , right ?

[@How2Wrench]

I'd have to watch the video at the spot you are talking about...old video and we have 700 on the channel...😎 From the title I'd say yes? Want more? Smash the sub button! Here are the links to support us for this information and our work saving you money. Join this channel to get access to perks: (Free tool giveaways and member-only videos) kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Give us a high 5 here: www.paypal.me/how2wrench

[@يسرىعبدالكريم-ه6ه]

Thank You for Reply They are said when Lapping a Valves , There is pressure on the old piston rings and , Oil will leak into the combustion chamber Is this what will limit true

[@davidgilmour9790]

if you seal up cylinder head valve seats to valve by lapping in completely and replace the valve seals if you did nothing to the rings or bore then it May contribute to more oil burning by the worn rings. It is possible to burn more oil in this way from 35 years of experience.

[@robertoudokrapf453]

OLÁ. Se pesquisares como são fabricados os setores de aço cromado concluirá que eles devem ter lado de montagem em relação a lateral da canaleta do pistão . ABRAÇOS

[@robertoudokrapf453]

OLÁ. Insisto com o fato de que sobre anéis não entendes o suficiente. Tens muito a aprender. ABRAÇOS..

[@dean-gm1lg]

Use a feeler gauge to run the rings on the piston it's a lot easier than using picks etc

[@How2Wrench]

You rock! 👍 Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@JeramieCurtice]

Thanks for the video. Yes, it all makes sense.

[@How2Wrench]

We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. 1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! 2. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

[@cvcoco]

Thanks for the info, a big help right now.

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@michaelhuckabay739]

How do you do a Ford 5.4

[@How2Wrench]

Hi friend. Running down today’s list of comments! I try to answer when I've seen it before, but I don't recognize this one. I’m the Social Media Manager here. That’s a good question for Shane. He gets hundreds of requests a day and starts each day answering MEMBER or donation support questions first and then if there is time he will try to circle back before heading to the shop for customer work. Want faster response times? Join link below. Thank you for commenting. Want more benefits? -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@rmt5820]

Actually I just wanna say thank you for your useful video ❤🙏

[@How2Wrench]

My pleasure 😊 Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@rmt5820]

@@How2Wrench Do you have any video about gap ring piston or torque wrench settings on silender head?

[@Membreins]

why not work the top oil ring from the bottom so you don't have to deal with the top 2 compression grooves? makes more sense I think?

[@How2Wrench]

SUCH a good question I'm going to use it in this months Live Q &.A on August 2nd! The answer is no. I will do a deep dive on this one! Quick answer is on how the piston is manufactured! We sure love you taking the time to comment. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Want to help us back? Please subscribe and give us a high 5 here: www.paypal.me/how2wrench Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

[@obazeclinton3211]

I need a complete installation of all toyota engine with a proper explanation

[@nathanjones3459]

Great vid well explained. thanks for the tips

[@How2Wrench]

Thank you for the kind words and sharing my work. If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench

[@isckq4352]

I'm just think that each one teacher have your book. Best regards

[@How2Wrench]

Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@LudmilMetodiev]

Great video.

[@How2Wrench]

Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@pangertoshipangslkr19janu43]

Very informative, nice video

[@How2Wrench]

Glad you think so! We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. 1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! 2. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

[@augustinalin402]

thank you for the video

[@How2Wrench]

Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! kzbin.info/www/bejne/pXLIia1no8lgm7M (and other free tools and products!) Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/ Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzbin.infoplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!

[@mohammadziaekhlassi263]

How to install piston rings motorcycle and how to install piston on the cylinder

[@How2Wrench]

That surely is a question for Shane. We try to respond to these questions but with 700 videos on here its hard to keep up with the demand of over 400 requests a week for “a quick answer” it's just become hard to manage in a timely manner. Good news you can catch him directly. You know him from his videos, no shortcuts on answers so he wants you to get everything you need. If looking for technical help, business collaboration call him directly @ [phone] Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench Thank you in advance for giving back! He looks forward to working with you directly! Have you hit that subscribe button yet? :)

[@mrclean6796]

Wow, thanks for posting such an informative video. It helped me out big time! :-)

[@How2Wrench]

You're welcome friend. Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My KZbin has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com

[@dylanclingenpeel5446]

Do you not even bother to clean the old carbon off? Wouldn’t that be be better for the new rings to not allow future problems with the new ones?

[@How2Wrench]

Dylan, you must be familiar with the channel. This was a class using a bench motor used over and over while learning in a technician training program. There are fully motor build in playlists and so you know, many videos that were shortened and titled for a specific skill to learn. Make sense? Thanks for subbing... You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@BoykieGovender]

hey moron pay attention,this is an informative video, not an engine overhaul.

[@tomsmwale5851]

The top of an o-ring that is properly installed will usually be:

[@How2Wrench]

Looks like your thought was cut off. Can you clarify? 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@أحم-ت2م]

thanxx

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@plusblood5101]

Superb

[@proteusmacapagal1453]

yup

[@How2Wrench]

Hello friend! Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Still have questions? Coach Conley provides tech help and works one on one! His KZbin and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance! Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!

[@tylerlondon5052]

Awesome explanation. Thanks!

[@How2Wrench]

Thank you for the comment. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back. * Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/ * Simple donation to say "KEEP IT UP" May you have a great day and... www.paypal.me/how2wrench Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/ Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU

[@ErickochiengOsuri]

Erick ​@@How2Wrench

[@ErickochiengOsuri]

Owesom

[@amidon422]

Thank you for all the information! Not only how to do it correctly but the make sure you don't do this information!

[@How2Wrench]

Glad it was helpful! Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@tombruce6398]

That makes sense

[@djohnson3678]

indeedly superb A+

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@brightadade9548]

I like your education ooo my dear

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@ajw6715]

They do make ring expanders. Lol.

[@How2Wrench]

:)

[@246cuevas]

hmmmmm re learned LOL thanks for refreshing my memory

[@How2Wrench]

Nice. Thank you for watching, liking or sharing! Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com

[@herkko61]

The rings will rotate, no matter what position you put them to.

[@brendenbanks9293]

right... every engine I've torn down the end-gaps have been completely out of whack to where they started.

[@ati1903]

Yeah i dont understand this stupid thing with positions, for what should that be good?

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com