Tools and products in this video (affiliate): Shelf Brackets: amzn.to/3EhVTba Doweling Jig: amzn.to/2CUcvuf Magnets: amzn.to/3yASlAc Compact Router: amzn.to/3eDmnpT Chamfer Router Bit: amzn.to/3cvEKON Threaded Rod: amzn.to/3jCRwOA Drill and driver: amzn.to/2VfxyNr Drill bits: amzn.to/2SvXy6F Circular saw: amzn.to/39RkwLf Circular Saw Blade: amzn.to/3HnhShm Dark Walnut wood stain: amzn.to/35p8mIU Varathane Water Based Polyurethane Satin Wood Finish: amzn.to/3eDVtiL Random orbit sander: amzn.to/3fhd1Rt 90 Degree Corner Clamp: amzn.to/3tm1Uy0 Orange Dead Blow Hammer: amzn.to/3lLXTh6 Digital Angle Gauge Magnetic: amzn.to/2M8rty9 Boiled Linseed Oil: amzn.to/3AZG2ws Angle Grinder: amzn.to/3hbqU3V IMPORTANT: if you’re thinking about attempting the second method, please watch my follow up video kzbin.info/www/bejne/jarbY4lsbct5ftU
@Jordansupreme Жыл бұрын
Ok cool, but where’d you get them boots?
@alanasplund6656 Жыл бұрын
I liked the part where you threw away the stud finder so you could use the far superior method of hammering a nail into the drywall sixteen times to find the edge of the stud.
@jakerazmataz852 Жыл бұрын
Work smarter not....never mind.
@nightstringers Жыл бұрын
Alan Asplund you are loved that is awesome lol lol
@4TheMotorist Жыл бұрын
@@jakerazmataz852 🤣
@jtoker9758 Жыл бұрын
It would have been nice to see if the stud finder actually works on the wall. Never used one or will buy one, so don't know.
@Marinesniprx Жыл бұрын
@@jtoker9758 yes they work well and that one in particular throws up a red arrow exactly on the stud.
@Ninja_Drummer2 жыл бұрын
Nice ideas for the shelves. One tip I have learned when staining the end grain of timber. Spend a bit of time sanding it super fine down to 400+ grit with random orbital sander. It stops it soaking up too much extra stain and looking darker than the rest of the side grain timber.
@lohphat2 жыл бұрын
If the construction crew knew their craft, there would be no dimples over the stud fasteners, the mudding and sanding should have eliminated the dimples.
@MikkoRantalainen2 жыл бұрын
I totally agree. And if the drywalls are pro grade, they will have mud all over the wall because that's the only sure way to have no seams of any kind visible through the paint. The wall will have visible imperfections only if it's not sanded after mudding.
@cugsy2 жыл бұрын
100% agree... This part of the video is so wrong... The way he finds stud center by nailing through the wall over and over...*facepalm* Just use a stud finder and that way you'll know if there's nearby electrical wires too. Oh and you won't have to nail 700 holes in your wall.
@kyleriesland78632 жыл бұрын
@@cugsy lmao you must not work with carpenters. For one, the nails he put on the wall are placed so that when yhe shelf goes in, you'll never see it. For 2, ever cabinet guy I know uses that same technique. Pull down some of your cabinets and I'm sure you'll find quite a few holes my friend
@cugsy2 жыл бұрын
@@kyleriesland7863 you're right I don't, I just fix all their botched and rushed work lol
@kyleriesland78632 жыл бұрын
@@cugsy I doubt that lol these guys hang perfect kitchens with 15 or so cabinets in 3 hours. Plumb, level, flush stiles, and crown all installed. Hbu? Botched work lmao what a joke
@douglee6502 жыл бұрын
DIYers, when drilling into walls watch out for wires and pipes, water and gas. Know where your shutoffs for everything are. Usually good construction will put metal plates so you can’t drill through. And there’s convention where they are embedded halfway in the stud so the depth is known. But research this and DIY safely
@Imbatmn572 жыл бұрын
I don't think I'll put holes in my walls, I don't trust that there's a metal plate in between the drywall and the wires
@ModMINI2 жыл бұрын
This is a very important precaution as the time and cost to repair could be very high. The good news is you have maybe 2 or 3 things going through a stud on average at various heights, usually close to floor or ceiling or the height of a wall switch, so you'll probably be lucky and find nothing in the way. But still check!
@OnlyBlix2 жыл бұрын
@@Imbatmn57 The wires should be following code, which means they're going through the center of the stud and give 1 3/8 inches on both sides of the wood. This is done so drywall screws (1 1/4 in.) can safely go into the studs since drywall is 1/2 in. thick + the 1 3/8 in given by the stud. So use the appropriate length screws when going into studs and you should be fine. Pipes on the other hand, you can indeed hit if you mistake one for a stud.
@christopherjones71912 жыл бұрын
@@OnlyBlix never assume the guy before you knew what they were doing.
@TortureBot7 ай бұрын
I use a stud finder from time to time but I have used your methods for finding studs for years. Very accurate, and to be honest, if you get just the right sunlight in a room or use a flashlight at night, you can find all of the studs easily just by looking for screws. I know people will claim that excellent drywallers will not make mistakes that will make this obvious, but I guess I have never seen excellent drywallers. If you use a small powerful magnet with a thin piece of cloth to keep you from making marks on your walls, you can also find the nail or screw heads very easily.
@raterus5 ай бұрын
I'd be careful with drilling so deep in the studs for option 2. Residential electric wire will typically be 1.5" deep in the stud. You hit one of those and you have a much bigger problem on your hands.
@DragonclawMakerStudio Жыл бұрын
Good stuff. Thanks for the video. Love the ending. Working on my Stormtrooper Star Wars themed bar shelves."Thanks for watching bye."
@hallucinati2 жыл бұрын
Dude i love the closeout. Thanksforwatchingbye.
@kennethamend85572 жыл бұрын
REAL TALK!!! Using a magnet to find the screw's... I just had a paradigm shift!! Both my stud finders fail me at times.
@7evolance2 жыл бұрын
I agree with you, anker product is quality.
@mr.deswal69032 жыл бұрын
Well done
@SteveJaeger2 жыл бұрын
You accidently had some content in your ads and sponsor name dropping!
@kingalphadogg2 жыл бұрын
Cool vid bro, great work! Entertaining and useful! 😁🙌🏾👍🏾
@JuanHernandez-pe4wq Жыл бұрын
Great job on this video. Bravo!
@sunkissed4261 Жыл бұрын
Beautiful work!
@wanderingbufoon2 жыл бұрын
moral of the story is that it isn't about the it's a shower or a grower, it's all wood.
@DonnyJepp722 жыл бұрын
Excellent content friend!
@chauncybrukshut9279 Жыл бұрын
I saw the cat and subbed.
@Mixwell19832 жыл бұрын
Actually used those same brackets for shelves in my bathroom in my new house but used 1x8s. The pro version you did I went a diff route for actual floating shelves and drilled 1/2 holes for dowels and the ripped 1 1/2" inches and essentially screwed the 1 1/2" piece with the dowels inserted onto the wall and then slid the remain part of the shelf onto the "base" so it looked like it hadnt been cut. Im sure it isnt as strong but for pictures and plants its solid.. An even easier way is to drill 2 pocket holes on top of the shelves and use 3” pocket screws and plugs.. itll still hold at least 50LBs and is really fast to put up but I wouldnt try jumping on it hahaha.
@ismu342 жыл бұрын
Another method is to drive long lag bolts/coach screws halfway into the wall, and then cut the heads off
@Tang526 Жыл бұрын
You think the bracket method is safe enough for some books a plant and some Knick knacks?
@jenifferjolie7825Ай бұрын
hi this was very very helpful but where can I buy that wood and what size Is that? please
@malakiblunt2 жыл бұрын
i probed the area with a nail to find the exact location of the power cable / water pipe
@tonicrvnts Жыл бұрын
And how do you secure the shelf to the bolts? 😯
@BenjaminNew2 жыл бұрын
Nice. But why did you chamfer the inside edge for the first shelve....
@thumbsup9208 Жыл бұрын
Awesme nice. Thanks for share
@huntermccaskill39382 жыл бұрын
What would happen if you combined the methods, I wonder?
@ВладиславЯныбеков-м2и2 жыл бұрын
Подобные широкие доски не желательно использовать так как их поведет, на видео видно как вторая уже выгнулась немного другой. Лучше распилить по середине, сердцевину лучше тоже отпилить, и склеить. Визуально, особенно с темной покраской, это будет не заметно.
@pagefour6498 Жыл бұрын
Do they make something that is a lag bolt and threaded rod combo?
@esra_erimez2 жыл бұрын
I googled "stud" and this video came up
@minimonkeyplay2 жыл бұрын
if you have metal stud forget this.
@ernstgross58522 жыл бұрын
Why is your anglegrinder turning the wrong way?
@bozakc2 жыл бұрын
My floating shelf sank! Unfortunately, it was mounted on a concrete wall. Does anyone have suggestion how to mount more securely on block wall?
@rsolsjo2 жыл бұрын
Would love to have the seamless floating shelves all over my apartment but it's a rental so I shouldn't drill a hundred holes in the walls. 😭
@IrishStoner2 жыл бұрын
Floating shelves appear to be Floating no box no bracket, Probably because they hook into screws through the pre cut holes in the back
@Kentanimationnnnnnnnn10 ай бұрын
0:52 there a little face there :D
@motoryzen2 жыл бұрын
1:26 to 1:38 (facepalms) dammit I should have though about that months ago...clever...
@victorvek52272 жыл бұрын
Holy shit, get yourself a stud finder.
@ZetaReticulian2 жыл бұрын
If you can find a stud in your wall by looking for “dimples” using your cellphones flashlight…… you got a second rate drywall guy.
@Bevity8 ай бұрын
He probably put up the wall himself.
@raterus5 ай бұрын
Even with top drywall finishing, give it enough time and kids bouncing off the walls, you'll dimple it up.
@Sidecutter2 жыл бұрын
Hey so...problem it seems like you didn't consider. Those threaded rods are going WAY deep into the stud. More than enough to have you drilling into pipes or wiring that is run through the stud center. This can only be used in walls where you know 100% that there is nothing going through the studs in that location.
@gideonvanloggerenberg48312 жыл бұрын
Damn right.
@barryallen55072 жыл бұрын
Personally, if I wanted a high load bearing floating wall shelf, I would just cut the drywall, double the studs, and use a torsion based steel T bracket for the shelf.
@00gyb00gy2 жыл бұрын
@@barryallen5507 I was going to comment the same thing. Cutting drywall would have been easier, and safer. And if it needs to hold more of a load, put more load bearing support... Smh
@CheckeredDeath892 жыл бұрын
its not very difficult to know if there is or not. Is why it says Pro version :D
@jamIam65482 жыл бұрын
Stud guards?
@Trentberkeley862 жыл бұрын
Where’s like the pro version? You should never weaken the integrity of the stud wall with that kind of application, a professional would never do this. A pro would use stud mounted brackets
@ScottYuJan2 жыл бұрын
the magnet technique for finding studs is so clever 😐
@refleximus60712 жыл бұрын
For sure, I agree those yellow stud finders are GARBAAAGGEEEE. I see them and I don't even bother grabbing them to find a stud. I do however like the franklin pro sensors they do okay at finding studs. Often for sale at costco. usually found at other big box stores. Magnet method works great in most cases.
@DavidKasan2 жыл бұрын
You teach us about a new great charging option, two different ways to locate studs, two different styles of floating shelves, two different finish options, and test both styles with results and review and do it ALL in only 6 1/2 minutes! Great video! So many other channels could / should learn from you.
@JyotbirSingh2 жыл бұрын
2 ways to drill at 90 degrees straight
@moreseun2 жыл бұрын
Bro 💥👊🏾
@aam772 жыл бұрын
Very nice video. That "Thanks for watching bye" at the end as if his parents caught him doing something he wasn't supposd to :p
@pitviper7924 Жыл бұрын
When drilling more than 1-1/2" into a stud, be careful, there might be wiring or plumbing going through the center of the stud. If the house was built correctly and inspected before the drywall went up, there should be metal plates covering all wiring or plumbing going through the studs. Unfortunately a lot of DIYers do some crazy stuff and skip the required steps to be up to code.
@j_dane9519 Жыл бұрын
In my jurisdiction you only need protective plates if the wire or pipe is less than 1 inch from the edge of the stud. Drill deeper than that and there's never any protection.
@SpectrumOfChange Жыл бұрын
Be careful how, drill 1.5 inches in, then shine a light and if something shines back - go somewhere else?
@jeffreyvanzeijst7932 Жыл бұрын
Isn't that the whole reason for using the studfinder..since some of them are actually also powercord and copper pipe detectors?
@uhmmchicken10 ай бұрын
I did not know there were stud finders capable of detecting live wire and pipes, that's super useful. I had some really old stud finders as a kid and have always used the knocking technique instead because they were finicky and annoying to use. You can clearly feel/hear the stud behind the drywall with a light tap from your knuckles.@@jeffreyvanzeijst7932
@Chris____.10 ай бұрын
@@SpectrumOfChange Look at the schematic of the house, you can see all the spots with cables or plumbing, dont be dumb and drill into wires & death, be smart and just look at the piece of paper (or ask the landlord if you dont have it, idk)
@jamesgallagher33172 жыл бұрын
I'm gonna jump on all the shelves in my friend's house to see if they are strong enough
@A.Mere.Creator2 жыл бұрын
This is the step by step wood finishing video I was talking about: kzbin.info/www/bejne/i3qmc6pnhL2XmKs
@ramm26012 жыл бұрын
Love the testing side of things. You should try a coat of white stain then the walnut stain. It will make a white oak typa color which will look sick.
@lancetaylor90152 жыл бұрын
Is there an example of this in another video? I'd like to see what you're talking about-- sounds awesome.
@Cash4Fruit Жыл бұрын
I think what you’re describing is the very trendy Restoration Hardware a type of wood I’m looking for I wish to see in real life example though!
@Tang526 Жыл бұрын
I need a image reference
@AyoLukeM Жыл бұрын
You really threw away your stud finder and instead put a nail through the wall sixteen times….this must be a gag
@00gyb00gy2 жыл бұрын
*DO NOT ATTEMPT THIS AT HOME* DIY KZbinrs beware!!! It would be easier *And more SAFE* to do the second shelf if you were to cut the dry wall. There's water lines, gas lines, vent lines, electrical lines... *Don't go drilling metal all-thread rods through studs*
@RobertDPenn Жыл бұрын
Thank you! Thank you so much for testing them to the breaking point. I really appreciate it. That is what I want to see. I want to see when they break
@A.Mere.Creator2 жыл бұрын
Tools and products in this video (affiliate): Shelf Brackets: amzn.to/3EhVTba Doweling Jig: amzn.to/2CUcvuf Threaded Rod: amzn.to/3jCRwOA Drill and driver: amzn.to/2VfxyNr Drill bits: amzn.to/2SvXy6F Circular saw: amzn.to/39RkwLf Circular Saw Blade: amzn.to/3HnhShm Dark Walnut wood stain: amzn.to/35p8mIU Varathane Water Based Polyurethane Satin Wood Finish: amzn.to/3eDVtiL Random orbit sander: amzn.to/3fhd1Rt 90 Degree Corner Clamp: amzn.to/3tm1Uy0 Orange Dead Blow Hammer: amzn.to/3lLXTh6 Digital Angle Gauge Magnetic: amzn.to/2M8rty9 Compact Router: amzn.to/3eDmnpT Chamfer Router Bit: amzn.to/3cvEKON Boiled Linseed Oil: amzn.to/3AZG2ws Angle Grinder: amzn.to/3hbqU3V
@rafewheadon19632 жыл бұрын
In my country we make our houses out of concrete or bricks, so we just drill anywhere we want. and we're not afraid of linseed oil fires.
@A.Mere.Creator2 жыл бұрын
@@rafewheadon1963 Awesome, thanks for sharing :)
@andricksonrodriguez19052 жыл бұрын
Hey drill bit sold out can you give me another link please
@lighttheoryllc43372 жыл бұрын
Assalamualaikum brother Time for a fresh fade at the barbershop
@nightstringers Жыл бұрын
I like the alien face on the wood 0:53
@j_dane9519 Жыл бұрын
The fire retardant in XPS dust is not safe to breathe. It's safe to cut with a utility knife (as with normal insulation jobs), but you might want to find another material to protect your workbench (e.g., plywood) from a circular saw. I like the shelf method though, especially for wall areas that aren't likely to have plumbing or electrical running through them.
@meh84f84f Жыл бұрын
To be fair, wood dust isn't safe to breathe either. But insulation is far worse.
@nnaheim.2 жыл бұрын
I had a linseed oil rag smoke and set off the fire alarm, would of caught fire and burned the house down otherwise.
@samleonyne2 жыл бұрын
First KZbinr I came across who didn't say "Like the video / Subscribe to the channel" crap in the end of the video! That's Mere Creative I must say 💯
@Jaze202210 ай бұрын
Stud finders are marginally useful when you need to put in a small screw or nail. When you want to pop in a 1/2" rod, you better dam well know the exact location of the stud and drill in straight.
@Balenza345 Жыл бұрын
Grade 8.8 bolts: Also known as structural grade bolts, they are typically made of steel and plated with several coatings. Grade 10.9 bolts: As these bolts are most often used in the automotive industry, they are also referred to as ‘car bolts’. They are made of boron or carbon steel and have high tensile strength (1040 MPa). Grade 12.9 bolts: Known for their strength, these bolts are most often used in the manufacturing and construction industries to join medium or heavy industrial parts such as an automotive engine. Grade 14.9 bolts: It's simple: these are the most durable bolts you can use in your application. Perfect to join large structural elements to each other, the grade 14.9 bolt has a whopping maximum tensile strength of 1400 MPa. igh tensile rods.
@donnaleeah5075 Жыл бұрын
Thanks. I want shelves my cats can jump up on and run around for years. Watched s video person didn't put brackets into studs. Looked awesome! Lol for a few weeks. I don't want to do that error!!
@MARIOBAHAR692 жыл бұрын
I like your video sirr, best videos 👍♥️🇮🇩🇲🇾
@Mafioso1731 Жыл бұрын
For the beginners shelf, is it okay if I put seagulls for dummies instead of horses for dummies? Or do I need to redo the whole thing? Please help I'm having a panic attack.
@InsanitiesBrother2 жыл бұрын
Having a brick house and using youtube has made me realise how much harder home DIY can be with a timber house. Putting up a shelf "here seems fine" STARTS DRILLING.
@alibeck1383 Жыл бұрын
Hey, have watched and rewatched yo see how far exactly did you drill through on the shelf itself. You say you’re using an 8in rod, but how much did you insert into the shelf?? Thanks
@fellzer2 жыл бұрын
What I do is drive foot long lag bolts into the customer wall, then before mounting the shelf, fill the holes with construction adhesive. That way, I don't get a call back and the poor bastard inevitably trying to renovate in the next 5 years is cursing my name.
@akan6262 жыл бұрын
How would you make sure you’re not hitting a utility if you’re drilling deeper than 1.5 inches?
@thedandy67652 жыл бұрын
my walls are solid concrete like most walls in the netherlands
@Sokail872 жыл бұрын
Hahahahaha I was totally caught off guard by the hastiness in the very end! Great video, and nice, very doable beginner's project. :)
@MooseDoesStuff2 жыл бұрын
You threw out the studfinder and literally went with banging nails in? Banging nails in is something people say to do as a JOKE.
@sasharose29638 ай бұрын
Wow. Super in depth and well executed. Very impressed. I watch so many diys. This really impressed me.
@privacyatty2 жыл бұрын
Does putting a half inch hole in center of small side of 2x4 potentially mess with strength of wall being held up?
@Tien1million2 жыл бұрын
I wouldn't advise doing it to the load bearing wall. But a lot of the walls in your house are just dividers.
@shadis2 жыл бұрын
@@Tien1million Sure, making the determination as a DIY'er, standing inside a square box, and pointing to a load bearing wall is super easy.
@TrojenMonkey4 ай бұрын
Summary of this video: "Want to do your own shelves? You just need over 5k $ worth of tools to process the wood and a garage to keep it!" I still wonder if I'll ever randomly land on a random DIY project that doesn't require renting a carpenter's shop for a day.
@unionse7en2 жыл бұрын
beam strength is defined by the cross sectional area (area moment of inertia), so the round rods are "vertically thicker" than the flat brackets. (the reason for the shape of an I beam). Study hollow beams and cantilevers to solid ones, for those interested
@onetwothree41482 жыл бұрын
Also determined by the material. All-thread has very little shear strength and the threads are for metal not wood. His results would have been different if he used the same diameter lag bolts or thicker brackets.
@Alexey_ru2 жыл бұрын
Anker are the best cables I have ever seen. it's sad, but in recent years they cost like original apples, but they are much better in quality and do not peel off and do not get dirty. Good job dude! Best regards from Russia!
@joshf8231 Жыл бұрын
Who’s jumping on those shelves. Who’s putting that much weight on those shelves. Over kill for the point. It made me click on the link. Really. Both would probably work fine.
@alexhirt43822 жыл бұрын
You could also use 1/2 inch lag screws, 6 inches long and cut the heads off for easier installation.
@onetwothree41482 жыл бұрын
That would have been a LOT stronger than all thread
@bmbullman2 жыл бұрын
You'd have a hell of a time getting them OUT though with no heads..
@alexhirt43822 жыл бұрын
Not as much as you'd think. Angle grinder to cut slats for a flat head or channel locks/vise grips. They should pop out pretty easy. And you'd only ever have to take them out if you decided you didn't want a mantle or shelf there anymore.
@jtoker9758 Жыл бұрын
The brackets are definitely better. I use threaded rod all the time and work and they bend so easy. If you could find a hardened bolt that long, and cut the bolt head off and use that instead of the thread rod, I think you will get even better results.
@hr1100 Жыл бұрын
Are you guys putting uranium blocks on those shelves? The guy just applied force way more than a person weights (because of the actual jumping).
@jtoker9758 Жыл бұрын
@@hr1100 You can still see the boards droop is all. Go with a better option than threaded rod and it won't. Also saw another video just like this, but the dude used 5/8s rod and it looked much stronger and not as bendy as the 1/2 inch rod. Also I don't use threaded rod for shelving at work. I use it to hang up pipe above everyone's head. But they bend a lot easier than you would imagine (1/2 in thread rod). A 1/2 inch threaded bolt wouldn't bend as easily. But going up to 5/8s would work better too.
@sdsd-ne9hg2 жыл бұрын
Do not bother with magnets or putting hundreds of holes in your wall to find the studs, just use sound, tap the wall with your finger, not super hard but still rather firmly, the sound will change over the studs. knowing how wide they are (4.5cm here) you will be able to work out where they are with high accuracy with some practice. If you are reading this and have never tried this, get up and go and test it out on a wall in your home, i bet you can locate all the studs in the wall in under a minut even if you have never done this before. Here is why you should not rely on magnets, when we fix damage in drywall we cut out the section that is damaged, and we put in thin pices of wood that is taller then the hole and screw in, then we add new drywall that matches the hole that has been cut out and screw in to those strops of wood, you will find these screws thinking the small strips of wood are studs. If you find these sections when taping with your finger they will sound of, but they will not sound like a stud, and if you know where the studs are to either side of these then you will be able to work out that this is a old repair or something. And common sence should tell you why you don't want to walk around putting holes everywhere, that thing you are putting up might cover them up now, but odds are that is not going to sit there forever and at some point you will need to restore the wall behind whatever you put up, and if you are renting then those 500 holes are going to cost you the security deposit (or your landlord will send you a bill for fixing it, and odds are he is going to repaint the whole room to get the wallpaper or paint to mach, so it might end up being a expensive way of putting up a shelf or painting or whatever).
@donnaleeah5075 Жыл бұрын
I learned the knocking system back when I wear the teenager. Thank you Mom they're making sure your daughter had a tiny bit of knowledge. It has not let me down. I will however also try the magnet after I find it just to see how that works out. Thank you
@kunjpatel23552 жыл бұрын
Always love your vids...❤ keep it up
@A.Mere.Creator2 жыл бұрын
Thank you :)
@c0d3r1f1cАй бұрын
You definitely want to chamfer edges, because it makes them more durable if they get bumped or banged into. (They’ll also hurt less if it’s part of your body doing the bumping.)
@timothycorless72868 ай бұрын
Another trick. 1. Take cover plate off electrical outlet. 2. Find which side the box is attached to the stud. 3. Measure 3/4 " towards the stud the box is attached to. That will put you in the center of the stud. 4. Now you can measure 16" either way to the center of another stud.
@ExiledStardust2 жыл бұрын
Man, you get in there, make your points, and don't waste time! So many videos have lengthy preambles or bog down in the middle or take forever to explain something. Bravo, dude.
@AznTony3602 жыл бұрын
Wouldn’t even remotely call this diy vs pro. And using insulation foam so you don’t ruin your workbench, nice way to introduce more micro plastics into the world, and you weren’t using a respirator. Pro floating furniture uses French cleats. Nothings stronger when hanging objects or furniture from drywall using the studs. Ever saw a floating bed or a floating tv stand? They all use some variation of French cleats.
@Peter-qz8qs21 күн бұрын
Said in the video about studs: "Once you find one, you can find them all." Clearly this person is not talking about a house made before 1950.
@MrMikeT892 жыл бұрын
16 inches, sometimes 24. My dude, you haven't worked in the northeast. Many old building have 14", some 12", and some where the framer definitely said "screw it" lol
@lulul2 жыл бұрын
good job! i wonder how it works on brick walls, probably not that great on hollow type bricks and soft type insulation bricks (i don't know the term for those)..
@gecko25732 жыл бұрын
it will hold just fine, if worriedyou could use chemical anchors
@LiTLflor Жыл бұрын
Iphone chargers suck. Anker chargers suck with Android phones, which already include fast chargers... Sorry, lol, I just had to make the comment.
@tek9058 Жыл бұрын
US walls...would be more concerned about breaking them. In Europe we scan walls to find materials where drills fail, lol. Medieval times taught us how to build houses to resist catapults :D
@vipinravin9128 Жыл бұрын
I wanted build 70kg+15 kg= 85 kg supporting wall shelf. For inverter and a battery. Which one should I go for? :/
@BlazshoNikolov Жыл бұрын
US only... try this in concrete wall :))) I know cuz i was doing it at home. Drilling those wholes ... pain! ... But good work. Thank you for the video!
@satxbrad2 жыл бұрын
Thanks! I had built floating shelves while putting up a wall in the first place. With your techniques I can do it the other walls in the room
@gaspererjavec71082 жыл бұрын
You could use a higher tensile strength steel rod to get even better results, or even rebar. Awesome vid by the way.
@OnlyBlix2 жыл бұрын
Fuck it. Just build a house around the shelf with rebar inside reinforced concrete.
@birdolla4441 Жыл бұрын
I have used rebar, both into wood studs but also masonry. I then use a quality anchoring epoxy. Never had a problem
@cjveeneman2 жыл бұрын
get a good stud finder. Move left to right and mark, then right to left and mark. Screw in center. Saves about 71 nail holes...
@Nathas19892 жыл бұрын
So funny to watch every american DIY project looking for "studs". Just build proper houses. No need to search for studs...
@KruellNationGaming10 ай бұрын
holy crap.. the thickness of that drill bit and the depth it appears you went.. You just about cut that stud in half.. not much studd wall left on either side of half that stud.
@dougshaw9701 Жыл бұрын
Works fine if your wall is smooth and they used screws..what if you have a heavy texture and nailed? Don't toss your stud finder . there are other ways to locate i just tap the wall with my hammer , sounds different where the stud is maybe not 100% accurate but it works . What do other people do to locate .?
@vitaliterentjevs355910 ай бұрын
Nice. but I will send you a lifehack. Hermetic, the same one you use in everyday construction. You can stick you shelves on hermetic and it will tear out your wall before breaking off.
@wilhelmtaylor9863 Жыл бұрын
The definition of a "floating shelf" is a shelf that appears to float, i.e., has no visible mechanical hardware. Shelf brackets are the OPPOSITE of floating. Get that?
@JustinCrediblename10 ай бұрын
use grade 8 threaded rod to avoid bending...or just don't go crazy on the shelves. lol
@MartinTheMartian1 Жыл бұрын
How far did you drill into the studs??? Anything over 1.25" is a no go. The middle of the stud is where pipes and wires are run during construction.
@ThisTall2 жыл бұрын
I love this method. I use maple 1” dowel to do this all the time. A trick I use to place it on the stud is to just cut the drywall out in a small area within the shelfs footprint.
@Travis.Ladegast6 ай бұрын
So, if a “pro” does work around their own house, is that work being done DIY, or by a pro? Or DIY Pro. Haha.
@googlesbitch2 жыл бұрын
Bending the threaded rods shouldn't be the concern, it's splitting the studs inside the walls when driving a long metal rod and stomping on them.
@devinmahoney37772 жыл бұрын
Why shouldn’t the results of the test be the results of the test?!? He tested it and the rods bent. The studs did not split…
@googlesbitch2 жыл бұрын
@@devinmahoney3777 This video sends a message for others to try it and I am just leaving a caveat for others to be aware of the consequences of doing such a thing. Repairing a broken stud is far more expensive and risky, especially if a load bearing wall damaged, causing possible structure to shift.
@SLICEDfinds2 жыл бұрын
That's the same though I had when I saw him using a 3/8 bit on a 1-1/2" stud.
@googlesbitch2 жыл бұрын
@@SLICEDfinds Even worst, he used a 1/2" bit and that means 1/3 of the wood has been removed and wood is weakest when cut against the grain.
@markoshun2 жыл бұрын
Great video, good method. Bonus tips and still short and to the point. From a carpenter’s perspective. 1- Jumping is applying a force of several times his weight. No shelf is designed for that. Solution, don’t jump on it (except for a KZbin demo). 2- Walls are already full of split studs just from the quality of wood we use for framing 3- Studs are already full of larger than 1/2” holes for wiring and plumbing.