Why don't people use these for floating shelves?

  Рет қаралды 1,854,083

Lincoln St. Woodworks

Lincoln St. Woodworks

Күн бұрын

Пікірлер: 1 100
@Mason-gx4qc
@Mason-gx4qc Жыл бұрын
As below, thanks for not editing out mistakes made on builds. Most of what I (we) learn is from mistakes made and also adds a bit of entertainment at your cost..😂
@Lincolnstww
@Lincolnstww Жыл бұрын
Happy to suffer for everyone else!
@HeyLookWhatICanDo
@HeyLookWhatICanDo 11 ай бұрын
I love the feather board and 44.8 degree tip on the long miters. I spent so much time fixing a gap because I just sent it through without much consideration at 45 degrees without much consideration.
@oxelaroost
@oxelaroost 9 ай бұрын
You acknowledging and not editing your mistakes.. makes you more real.. and actually makes it more inspiring .. This is my first video watching.... And I'm subscribing ... look forward to see more..
@ShutoStriker
@ShutoStriker 9 ай бұрын
@@HeyLookWhatICanDo I did one of my baseboards in master like this recently. Of course I messed up the last 45 degree cut (don't have great tools just electric hand saw and a steady hand). Not looking forward to it. Need to figure out how to scribe the opposing angle I need or I'll spend more time fixing a gap.
@Jizzlewobbwtfcus
@Jizzlewobbwtfcus 5 ай бұрын
AMEN! It also humanizes people we view as professionals...which is nice : ]
@elcockroach7328
@elcockroach7328 Жыл бұрын
Buddy, whenever you wonder if that is the correct profession for you: I am an amateur woodworker from Germany. Yes, I have lived in Canada for one year (in Kingston, ON) so I am able to follow english speaking channels, but other than that I just appreciate your presentation of very relatable woodworking challenges AND solutions for not 100% perfectly setup woodworking shops (or whatever that's called). You are instantly likable, relatable (is that even a word???) and are an important part of my woodworking inspirational routine. Please don't doubt yourself! Kind regards from Germany!
@Lincolnstww
@Lincolnstww Жыл бұрын
Thanks for the kind words. I greatly appreciate it
@keyscook
@keyscook 10 ай бұрын
Your English is better than most native speakers/writers. I was blessed to live in Germany right after I graduated from high school. I worked for the US army at the Landstuhl Regional Medical Center. I was a ski instructor and worked for the Moral Support Division! Vacation with pay! Cheers, Prost, from Seattle!
@fredlove4444
@fredlove4444 10 ай бұрын
Yes, relatable is a word. I commend you for your excellent English.
@BoyeeSmudger
@BoyeeSmudger 3 ай бұрын
Your English is way better than those that voted for brexit
@IhabFahmy
@IhabFahmy Жыл бұрын
_The second best thing about this video is the self-deprecating humour. The first is your woodworking skill. Thank you._
@Lincolnstww
@Lincolnstww Жыл бұрын
Thanks!
@sarasharick5209
@sarasharick5209 Жыл бұрын
Agreed!
@Grimm.Wraven
@Grimm.Wraven 11 ай бұрын
Shouldn’t that be “shelf-deprecating humour”?
@papoochacoo
@papoochacoo 11 ай бұрын
@Grimm.Wraven 😂
@stringlarson1247
@stringlarson1247 8 ай бұрын
@@Grimm.Wraven HA. I love a good groaner.
@coolabahwoodworking
@coolabahwoodworking Жыл бұрын
I can’t deal that a floating shelf video is so interesting and I even learned something. How dare you combine entertainment and education. 😂 great video really.
@Lincolnstww
@Lincolnstww Жыл бұрын
Thanks bud
@rharrington4204
@rharrington4204 10 ай бұрын
yewh. he crushed it. great video
@Ryan.Matlock
@Ryan.Matlock Жыл бұрын
In most woodworking videos, I'll pick up one or two tips that make it into my notes, but I got five solid tips from this one. Great work!
@donproctor3445
@donproctor3445 Жыл бұрын
Here's a tip for the lagbolt style. Take a rip of plywood of any thickness and dbl stick tape it to the wall where you want the shelf. Align the top of the plywood where the top of the shelf will go. Drill holes and thread lags into the wall. Cut-off heads, now remove plywood and you have a template for the shelf with bolt locations
@Lincolnstww
@Lincolnstww 11 ай бұрын
That’s brilliant
@yeahyeah7445
@yeahyeah7445 11 ай бұрын
IF I had all of the tools and machines that this guy has, I wouldn't need to watch a video. Sheesh!
@thomassosa2957
@thomassosa2957 11 ай бұрын
You can actually just use cardboard
@adamcoe
@adamcoe 11 ай бұрын
​@@thomassosa2957yeah really any scrap you have around that's long enough, even a piece of poster board or whatever would work just fine
@AsTheWheelsTurn
@AsTheWheelsTurn 11 ай бұрын
easier said than done. I have tried this way and if you are off AT ALL with the holes you drill in the shelf or the lags in the wall the shelf will be crooked and you cant really do anything to fix it. you need to have the lags perfectly straight and level. its not a bad idea at all I am just saying it is trickier than you might think! I prefer making my shelves hollow inside so there is an opening the whole length on the back side which gives you a lot more wiggle room. I also add a cleat to the wall so it is attached to the cleat so it cant slide around then the steel holds it up. I use L shaped brackets cut the drywall away, attach the brackets directly to the stud then the shelf can slid on to the part that is sticking out. it does require drywall patching after but I have never gone wrong with this method and it is very strong! also if there is going to be backsplash , tile or shiplap going on the wall those cut outs can be covered up without any drywall repair. I do love the lag idea I have just had issues before where I am just ever so slightly off on angle or levelness despite all my efforts and it turns into a real circus trying to make it right after.
@BrenQ99
@BrenQ99 11 ай бұрын
Points for your Dad for being there and helping in a way that is legitimately helpful!! I am a fan.
@jeffmikula331
@jeffmikula331 Жыл бұрын
As always, thank you for the insights, the ideas, but also the humility and the humanity. I feel like so many of the woodworking channels are so far beyond my skill level that even though I love to watch them, I can’t relate to their work. But when I watch yours, I can see myself in you. Thank you.
@Lincolnstww
@Lincolnstww Жыл бұрын
Thanks I appreciate that
@namewithheld8115
@namewithheld8115 11 ай бұрын
I can see myself if I work hard and gain lots of skill that I don't currently have.
@JCWren
@JCWren Жыл бұрын
Nice looking shelves! Pro tip on the installation of the second set. Put down a drop cloth when you're cutting the bolts down unless you like shiny bits of metal in your carpet.
@dwwoodbuilds
@dwwoodbuilds Жыл бұрын
especially if using an angle grinder!!
@SplashJohn
@SplashJohn 11 ай бұрын
@@dwwoodbuilds I'm hoping John's mention of using an angle grinder in a finished space was a joke. A less ridiculous option would be a sawzall with a metal blade. But a portable bandsaw (like John used) is easiest.
@ryanr.5458
@ryanr.5458 Ай бұрын
Admitting to, and showing the mistakes you make in your videos is a prime reason I enjoy your channel. It’d be easy to edit those out but then it loses genuineness and makes average woodworkers feel like KZbin “pros” don’t make mistakes. So thanks!
@TimothyM
@TimothyM Жыл бұрын
I am so glad you left in your "how could I have possibly done that?!" moments. I've been a furniture repair and restoration technician for 15 years, and STILL have these moments more often than I am comfortable with. Seeing the innate fallibility of the human condition in others goes a long way to help keep my own sense of worth on the level. Please, for my own sake, keep up the excellent and never 'quite' perfect-the-first-time work!
@bosco440
@bosco440 6 ай бұрын
Greetings fellow humans, I also have a tip for the lagbolt style shelves. The shelves I built were a bit smaller and I used 5/16” lag bolts. I cut the heads off the lag bolts before threading them in to the wall and simply chucked them in to my drill to drive them in to the wall. This had 2 advantages that I perceived. 1) it allowed me to make the mess of sparks and metal shavings in my basement at the bench vise instead of in my kitchen. 2) It allowed me to use the doweling jig to help keep things straight when i drove the lag bolts in because i could simply slide the jig off of the lags afterwards since there was no bolt head in the way. Thanks Lincoln St. Woodworks for this video tutorial. It was very helpful and inspiring.
@atomicsmith
@atomicsmith Жыл бұрын
I’ve used that lag bolt technique myself, and it’s my favorite way to do floating shelves. Amazing how strong the shelf ends up! Sometimes it’s hard to find those big lags in the right number locally. In those cases I used concrete form stakes. They are big metal spikes. You can slightly under drill the hole, then drive in the pointy end, and they’re not going anywhere. They even have little holes predrilled that you can use to secure the shelf with tiny screws. They are also usually cheaper than lags if you’re doing a lot…
@Lincolnstww
@Lincolnstww Жыл бұрын
great tip!
@Patrickitron
@Patrickitron 11 ай бұрын
If you don't want micrometal particles all over your kid's room, you can also use a hanger bolt. Use a Locking Pliers to twist it in place. I had to use a rubber mallet to bend the bolts to fit on my shelves which actually worked out because if your shelves fit perfectly, they tend to slip off the wall since there is no resistance.
@davey820051
@davey820051 11 ай бұрын
@@Patrickitron My little wrinkle: I use run one lag in about 90% of the final depth and then out of the pilot hole in each stud to pre-thread it, then cut the hex heads off the lags (outside or in the shop) and use Vice Grips to install them as you do. For heavier shelves (like a solid timber mantle), I bend the lags up ever so slightly for a snug fit and to counter any tendency to sag .
@rickbuchanan
@rickbuchanan 11 ай бұрын
I’m in a metric country but same thing should apply. I use 12mm threaded rod as it’s much cheaper and can be cut to any length. Drill a 10mm hole into the stud then the rod will cut its own thread twisted in with a pair of vice grips or an impact wrench if you clinch together two nuts. This way you don’t need to cut off the heads and if you cut the rod at the same length and use some tape on your drill bit when drilling studs you’re good to go.
@canebro1
@canebro1 11 ай бұрын
How do you attach the floating shelf to the lag bolt? It seems like it is just held on by friction. I would be afraid a kid would pull it off by accident.
@GaryT1952
@GaryT1952 Жыл бұрын
You were meant for this John...totally engaging, entertaining and educational ⭐⭐⭐⭐⭐
@Lincolnstww
@Lincolnstww Жыл бұрын
Much appreciated
@richpeggyfranks490
@richpeggyfranks490 11 ай бұрын
Great info-taining video - again. Thanks. As far as making simple mistakes, you have a lot of comrades. Recently, I built my grandson a treasure box for his shelf which included a non-removable secret drawer with magnets to keep it closed. After I COMPLETELY finished the box, I realized I had installed the magnets with matching polarities. Instead of holding the drawer closed, they kept the drawer open. I knew better. I tried to fix it, but ended up cutting the box into pieces and starting all over again.
@TylerStoner
@TylerStoner Жыл бұрын
I just did my first floating shelves with integrated book reading lights last month and measured the studs wrong, almost had to rebuild the whole thing. This video would have saved me some time! Scribing and pushing out the not-so-square drywall is a great tip! They turned out great! It's refreshing to see a different brand miter saw for once!
@Lincolnstww
@Lincolnstww Жыл бұрын
Thanks Tyler!
@AltruisticWarrior
@AltruisticWarrior 9 ай бұрын
I just bought a Flex Tool 12" miter saw recently, freaking love it! I've been very happy with their tools the last few years. Can't beat the lifetime warranty either.
@MatCendana
@MatCendana 11 ай бұрын
I really appreciate you showing the real work during the advertising slot. And not a clip from the sponsors. -- Selangor, Malaysia
@Lincolnstww
@Lincolnstww 11 ай бұрын
Thanks!
@T_Jonesy
@T_Jonesy Жыл бұрын
I love the thin floating shelf you made for your daughter's room. Great hack on how to make those without spending a fortune on hardware. Also, thanks for sharing your goofs. Makes those of us without your level of skill feel much better about our screw ups. Cheers!
@Lincolnstww
@Lincolnstww Жыл бұрын
Thanks for watching!
@pong9000
@pong9000 11 ай бұрын
Lag bolts you cut the heads off may be more available that fully-threaded rod that works as well.
@mikeypromail
@mikeypromail 9 ай бұрын
Thanks!
@Lincolnstww
@Lincolnstww 9 ай бұрын
Thank you!
@billeverett4090
@billeverett4090 Жыл бұрын
Great video and appreciate you showing the mistakes as well. I personally hate hanging anything on the walls. Seems like there is nothing that simple enough that I won’t run into a problem
@philwoodard5439
@philwoodard5439 Жыл бұрын
Thanks!
@Lincolnstww
@Lincolnstww Жыл бұрын
Thank you so much Phil!
@jus6681
@jus6681 11 ай бұрын
Great tips! I’ve done floating shelves a couple of times with a similar DIY hardware method except I used threaded rod with two nuts on the end and drove them in with an impact driver. The just removed the nuts.
@GasolineBoots
@GasolineBoots 11 ай бұрын
I really respect that you left your mistakes in the video. It made it feel SO relatable.
@matthewsunman2400
@matthewsunman2400 3 ай бұрын
Just spent a billion hours frantically searching for this video having watched ages ago and having no use for it, wife now wants floating shelves.
@IndyGuy09
@IndyGuy09 Жыл бұрын
Always appreciate your videos! I don't understand the ego comments. You literally show us your mistakes to prove you're only human like the rest of us. Keep up the great work! 💪
@Coreyrkennedy
@Coreyrkennedy Жыл бұрын
Great video as always! And good luck to future John trying to get those bolts back out of the wall at some point during a remodel 😂
@gulzeb
@gulzeb Жыл бұрын
A vise grip should do the trick
@pong9000
@pong9000 11 ай бұрын
If used cheaper rod threaded full-length, a pair of nuts locked against each other would put it in and take it out.
@Stuart68505
@Stuart68505 9 ай бұрын
I believe a pipe wrench would work for removing the bolts. With a slight flat ground into the headless bolt, a strong drill in reverse might work too.
@matthewshannon6946
@matthewshannon6946 8 ай бұрын
​@@Stuart68505Yep, chuck the bolts up in a 1/2" Milwaukee drill & pull 'em right out!
@silverkrowe
@silverkrowe 10 ай бұрын
I'm just a layman with a huge amount of curiosity who loves to build things, but I'm aware of a craftsman when I cross paths with one. What I enjoyed most about your video, aside from learning a lot, was your humility and self-deprecating humour in contrast to your obvious skills and creativity. An absolute inspiration, my friend. Festool?! Nice!
@ST-0311
@ST-0311 Жыл бұрын
I can build floating shelves, but I watched anyway for the entertainment aspect. However... When it came to the stop block on the table saw rail, that was a smack myself on the forehead moment. What a great tip! So obvious, but completely overlooked. Thanks!
@Lincolnstww
@Lincolnstww Жыл бұрын
Thanks for watching!
@ScottyRosencrance-dq4pj
@ScottyRosencrance-dq4pj 10 ай бұрын
Hey bud. I hope that almost all the time you go to sleep, knowing you are doing what you should be doing. One thing is for sure, we all know you should be here. You are clever, smooth talker, very skilled woodworker, and just as good of a teacher. I thank you for taking the chance at doing this. Amazing videos every time
@mcapo3040
@mcapo3040 Жыл бұрын
Me: Looking to find a video to help me sleep Also Me: Oh Snap a new Lincoln St video, sleep can wait >_>
@ashgiles4401
@ashgiles4401 Жыл бұрын
Get excited when I see you upload a new video. I really like your honesty on projects. Makes it more real and relatable. Please dont stop. Cheers
@L_NBN
@L_NBN 11 ай бұрын
Mate, promoting therapy on a woodworking channel is fantastic! I hope you're feeling better.
@chezthegreat
@chezthegreat 11 ай бұрын
Remember, BetterHelp sells your data to outside companies 😊👍
@JCAM-z9r
@JCAM-z9r 9 ай бұрын
I commend you on sharing the difficulties of life and Better Help’s services. My sister has a channel for coaching Black entrepreneurs and she’s shared how trying maintaining a channel can be. So thank you for sharing your talent, your skills and your precious time. God Bless!
@WoodcraftBySuman
@WoodcraftBySuman Жыл бұрын
Okay but can these shelves hold the weight of your ego?
@JRaymer315
@JRaymer315 Жыл бұрын
Give him a break. He's funny
@twestgard2
@twestgard2 Жыл бұрын
His ego gives us interesting videos. Your ego gives us snide Karen comments. 🤔
@JRaymer315
@JRaymer315 Жыл бұрын
Wait. I just look at your page. Aren't you his friend that he's featured before? Are you just breaking his chops?
@WoodcraftBySuman
@WoodcraftBySuman Жыл бұрын
@@JRaymer315 haha yes we are friends
@JRaymer315
@JRaymer315 Жыл бұрын
@@WoodcraftBySuman ohh alright. Nevermind then haha
@lowwwery
@lowwwery Ай бұрын
Wow man, it’s been a long time since I’ve seen such a well-executed ad read. Very organic and not intrusive at all. Good job!
@demonslayer4951
@demonslayer4951 11 ай бұрын
Lol, house walls in U.S are not tough.
@bobbyhempel1513
@bobbyhempel1513 7 ай бұрын
Mine withstand far stronger winds/ tornadoes than anything the UK sees.
@Zamonski
@Zamonski 7 ай бұрын
The 2nd one is very strong. With all kinds of wall. Except drywall with thin metal frame.
@AbhishekSharma-j6x
@AbhishekSharma-j6x 5 ай бұрын
Ignorant average American 😂
@Paul_vo24
@Paul_vo24 Ай бұрын
16” have 2’-4’ ok ngu
@KC9UDX
@KC9UDX 5 күн бұрын
LOL, metric people
@Familytreewoodworks
@Familytreewoodworks Жыл бұрын
Loved the simplicity and strength of the lag bolt idea. The continuous grain shelves looked great too!
@Lincolnstww
@Lincolnstww Жыл бұрын
Thanks!
@c.a.g.1977
@c.a.g.1977 Жыл бұрын
That measuring tric for the bolts = awesome! I hope to remember it when I get into such a situation again. The last three look fantastic!
@nicolasayastuy
@nicolasayastuy 5 ай бұрын
Man, I know nothing about woodworking, have no tools at all, but I enjoy seeing woodworking videos on my off times, it relaxes me, and it's the same to a lot of other men that I know and asked to. Don't you ever think that your content doesn't reach people who need it and enjoy it, because it does. Thanks for your vids!
@dannmarks
@dannmarks 11 ай бұрын
OK, I love the Stair Step Measurement guide idea. Never thought of that before, Love the 3 inch thick shelve and how you made the back fit the imperfect wall. Also showing your mistakes is very helpful - not that I would ever make a mistake myself. A lot of good material here.
@RolandO-b32
@RolandO-b32 23 күн бұрын
Thank you for editing your video so that we did not have to stop watching you build a mid project to hear the advertisement.. actually found this far more digestible with his delivery. Also, you’re definitely cut after this. Keep rocking!
@aaroncook8890
@aaroncook8890 Жыл бұрын
Dude, you're good enough for this. There are enough of us subscribed that will watch whatever you put out so long as you're putting some effort in.
@Lincolnstww
@Lincolnstww Жыл бұрын
I appreciate that!
@BigBlueDog8
@BigBlueDog8 Жыл бұрын
I like that you kept your content going at the same time as your advertisement/sponsor recognition. You didn't waste anyones time, and as I was typing youtube T- bagged it with a comercial. 🙁
@casperinmd
@casperinmd 9 ай бұрын
I love the intermediate idea! I put a pair in our kitchen for my wife and man I have an amazing system that came with the shelves to mount it, all welded etc..but I overpaid...I'd have done htis if I saw it first. Love it! I love your style and goofy humor too, I look forward to following along and learning some tricks from you!
@dwwoodbuilds
@dwwoodbuilds Жыл бұрын
Great video Jon! Really appreciate you show 3 ways! The lag bolt method is very nice! Great job on the continuous grain shelves (regardless of the issues!).
@7516gala
@7516gala 10 ай бұрын
This was fun to watch. I enjoyed your comment about variables: "When variables are mandatory in a project, you have to figure out unique ways to remove opportunities for human error to creep in." Glad you are doing this full time.
@madelinjoliegray
@madelinjoliegray 11 ай бұрын
I live in york south carolina and curious as to where you got the walnut ply. Thanks!
@Lincolnstww
@Lincolnstww 11 ай бұрын
I am a member at my local woodworkers guild and they special order everything I need
@stringlarson1247
@stringlarson1247 8 ай бұрын
Your channel just popped up on my YT feed. YT must be reading my mind as I've been thinking about doing some floating shelves. (and, no, I' 've not searched for anything on the topic). I'm not a good woodworker, but I am good at visualizing something and building it without making any drawings or plans. I love your presentation, tips, etc. I build a lot of things from salvaged/scavenged materials, and my shop is more of a sculpture/fix-it shop, so figuring out ways to make something with the tools at hand is SOP. Thank you for putting the time and effort into making these.
@shortsonfire79
@shortsonfire79 9 ай бұрын
I like floating shelves but I definitely learned the most about dealing with non-squared walls. Good stuff.
@ABeardedDad
@ABeardedDad 9 ай бұрын
Awesome. I saw a couple other videos and noone was just fitting a shelf over some big metal dowels like you did on the second shelf, and was like why not? Did I miss some obvious flaw? This is how I wanted to do it. Now I feel validated and confident. Thanks mate.
@1959mikel
@1959mikel Жыл бұрын
I’ve seen enough floating shelves videos, yours brought some new ideas and techniques with some nice entertainment! Keep up the good work and hopefully you’ll be rewarded in this cyber space.
@Raequest
@Raequest 11 ай бұрын
This is perfect timing. I was looking to do some sturdy floating shelves for my cats so they can climb and have someplace high to go, and I think I can take some of what I learned from this video to make some! Thanks!
@BrassIsMyGold
@BrassIsMyGold Жыл бұрын
I've installed floating shelves over the past few years, but learned a handful of tricks, maybe more, from watching this video. Thank you! Cut yourself some slack as this was awesome 👌.
@peteagain6718
@peteagain6718 7 ай бұрын
I like the way you show your mistakes-a lot of them edit them out for a flawless show. You are in the real world where being human we make mistakes. Keep up the good work.
@asoggyburger479
@asoggyburger479 11 ай бұрын
The right amount of humor along with helpful tips as well as showing your mistakes is why I like your channel. Keep it up!
@damonsutton8117
@damonsutton8117 10 ай бұрын
Awesome video, Jon. I echo many of the comments below...really appreciate you including mistakes, which helps the commoner avoid them. Also, running the ad while still showing work is a good way to keep watcher's interest. Finally, providing three different options, based on skill level, helps to engage varying levels of watchers. You rock, dude! Keep doin what you're doin!
@lorenzopatras9897
@lorenzopatras9897 5 ай бұрын
man, thanks for showing your tips and tricks for free. The last shelf fitting perfectly into an uneven wall (which most of the walls are) is amazing.
@a_ham_like_me
@a_ham_like_me Жыл бұрын
Love the wrap around grain on the last set of shelves! Fantastic work all the way around. Thanks for taking the time to produce this video.
@Lincolnstww
@Lincolnstww Жыл бұрын
Glad you liked it!
@TaylorToolworks
@TaylorToolworks Жыл бұрын
Really nice video with good, better and best versions with a buch of tips and tricks, some tool recs sprinkled throughout and kinda funny. Ticked a lot of boxes for me. Nice job Jon!!
@MrKipcorley
@MrKipcorley 3 ай бұрын
I love the simple explanation, the honesty and the humor.
@JesperMakes
@JesperMakes Жыл бұрын
9:31 Brilliant, thank you!
@bonacci01
@bonacci01 11 ай бұрын
I absolutely hate the youtube algorithm. Comment to boost it for myself and others. It hasn't showed me your videos for 6 months or more. I wish they would give us a "Channel Organization" system where you can group your channels into subject folders. Great video.
@robertmillstein8916
@robertmillstein8916 6 ай бұрын
I appreciate you talking about the benefit of mental health treatment. I've always respect you as a woodworker and teacher and now even more as a person
@albertm8576
@albertm8576 Жыл бұрын
Great video . I love that you actually show the mistakes made during the build cuz that does happen. I love watching your videos because they are way more about the realities that can happen when woodworking. 👍
@Shedhunter2
@Shedhunter2 11 ай бұрын
I love the lag screw idea! This will help me a lot when the studs aren't where I need them! Also, love the idea of making little viewports to check for wires and pipes! Thank you!
@davidberck9067
@davidberck9067 11 ай бұрын
I can’t tell you how much of a relief it is to see you have to do things over again. Thank you for including the mistakes! You do it in a funny way and it makes me and a whole bunch of other people like us feel better and continue in the craft. Mistakes are human! Thanks for a terrific channel 👊🏼😎
@Lincolnstww
@Lincolnstww 11 ай бұрын
thanks David! trust me there is more that doesnt even make the video
@kenerickson4923
@kenerickson4923 11 ай бұрын
Good tips. I put up 5 floating shelves and spent a lot of money on hardware. It also took a lot of time. I'll try these tips next time when I build shelves for my neighbor.
@ltdanthemanimal
@ltdanthemanimal Жыл бұрын
The shift over technique for getting true center of bolt markings! Genius! I have brackets already installed that are just cylinders out to insert into hole driled in the shelf just like this and thats gappens to be the enxt step of the project.
@corythickett1745
@corythickett1745 7 ай бұрын
Excellent video! Finally a "real" person who shows that not everything goes as planned. Well done! Time to build my shelves now. Appreciate the insights.
@jessical1767
@jessical1767 6 ай бұрын
love that you shared "better help" with viewers !!!
@AndreNon
@AndreNon Жыл бұрын
Major props for method #2. I spent way too much money on a fancy floating bracket set from R***ler. Required custom drill bits too. After much sweating and swearing, it accomplished what method 2 did… for bathroom shelving. Nice job.
@Lincolnstww
@Lincolnstww Жыл бұрын
yeah those kits are ridiculous - this is so much stronger + easier
@jeffsmith1858
@jeffsmith1858 11 ай бұрын
Great video. I came up with that lag screw technique about 10 years ago out of necessity. I recycled some 2 x 10 fir boards used in a cold room into floating shelves. I have used the folding miter technique also. It always looks so good when it all fits snug. Nice work.
@stickboy6772
@stickboy6772 10 ай бұрын
I just found, and love, this channel. most of it is beyond me and my capabilities but seems to be applicable to spark workaround ideas for my projects. personally, i like the fact you share mistakes. you do not let it sideline the video and shows us how to handle them. after all, who doesn't make mistakes. The smartest people i know are morons. They make mistakes and learn. thank you.
@BillKafig
@BillKafig 10 ай бұрын
When working with drywall, I like using Wallabot to "see through" the walls to find wires, pipes, and studs. I don't use it often, but when I need it, it's great!
@JimE6243
@JimE6243 Жыл бұрын
Another Wood Worker Commandment: Install an Incra TS-LS fence and you can move you fence anywhere and come back and make exact repeatable cuts weeks later if need be. One for router table too. Honestly, this fence is the best thing I have done to any of my tools. And yes, I have purchased other after market fences. Great vids, thanks.
@esmithiii2003
@esmithiii2003 Жыл бұрын
I am a very experienced woodworker but found this video extremely helpful. Thank. You!
@Lincolnstww
@Lincolnstww Жыл бұрын
Glad it was helpful!
@richiesun9676
@richiesun9676 9 ай бұрын
Been waiting for someone to design those brackets for years now. Great alternative to the older floating shelf style.
@5280Woodworking
@5280Woodworking 11 ай бұрын
Stair tread guides, genius! Pro tip, on the 3rd shelves it is not necessary to “sneak up” on the internal frame. Just make it 1/16” narrower, don’t over think it, gravity only pushes down on the shelves 😊. Great video, as usual!
@Lincolnstww
@Lincolnstww 11 ай бұрын
Yup - realized that after
@gilcd85
@gilcd85 Жыл бұрын
Loved the video! Option #2 has a couple of shortcomings that would make me not use it: 1) There is no locking mechanism for the shelves so they can be pulled out. If the threads hold them in place, then it's a one time installation that can't be moved. 2) Taking off the head of the lag screws will make removing them that much harder. Probably not impossible but much more complicated then needed.
@n_a3522
@n_a3522 11 ай бұрын
Great way to work in a sponsor while still showing work being accomplished. Not sure if you’re the first to do it, but it’s the first time I’ve actually noticed it. Kept my attention without skipping through.
@wayneprice6918
@wayneprice6918 11 ай бұрын
Great video and techniques. Love the stair tread guide. Great Makita tools. Best bang for the buck and will last forever! Some of my Makita tools are over 43 years old and still working great . Try using a belt sander to fine tune the wall scribe on the shelves. You can hold it horizontally or vertically. Vertically you can actually see the line. Learned that one from an old cabinet maker . Great channel, I will be back for more. Thanks
@MrHthr33
@MrHthr33 9 ай бұрын
This was quite possibly the best video I could have seen before starting my project. I am quite a beginner and I will keep your pro-tips in mind as I work on a floating desk and shelf’s for my office.
@RanjivJain
@RanjivJain Жыл бұрын
Love your channel... so glad you took this full time. have been watching since you were doing these every 6 months or so... I never get enough of your video's.. I know a little something about the re-work channel you and I should start at some point... Keep it up, you're doing awesome!
@ryandury
@ryandury Жыл бұрын
I was literally looking at a wall in my house this morning deciding how to go about doing this and considering the options. Thanks for the video :)
@robmcgrath5202
@robmcgrath5202 Жыл бұрын
I just discovered your channel and have enjoyed several so far. I have used your method #2 several times in the past, for small shelves and even as large as my fireplace mantle (required more bots, of course). I didn't see it anywhere, just thought of it myself. I used a Dremel tool with a cutoff wheel as my mini guillotine. It's nice to know that some of my ideas agree with other builders. Great video on all three options. I'd love to send you some pics if that's acceptable.
@azabache-vive
@azabache-vive 7 күн бұрын
My house was built in or around 1853. Walls are lath & plaster. Studs were spaced by the whim and spirit of the builders (once I had to knock down the plaster and laths from a narrow wall below a window; that’s how I found out). I could only attempt the first option and if I were lucky, there may be a single stud close enough. Mostly not. I’ve found that heavy-duty toggle bolts (the ones with the long plastic straps) will work. I plan to build several “floating” shelves for my cats. I think the shelves could handle that.
@800390bike
@800390bike 10 ай бұрын
Great video. I viewed it for the first time. I enjoy seeing you as a regular Joe, struggling through the day with projects that do not go as planned (rarely do). Keep them coming!
@leemunch4591
@leemunch4591 Жыл бұрын
Jon I love our videos and this one could not be more timely. I have a few piece of reclaimed American Chestnut that I am going to use for "floating" shelves. I have been trying to decide on the best method and now I know what I am going to do. Thanks again for your great work (and for including all of the "oops")
@richmac918
@richmac918 10 ай бұрын
Nice job and some very good suggestions (tricks). I've done floating shelves before and run into issues with crooked or wavy walls and you solved these issues better than I did. Wish I had seen this prior to doing mine.
@AnotherProdigalSon
@AnotherProdigalSon 6 ай бұрын
Absolutely amazing work. Very impressed. Felt sorry for you about the mess-up on the LED wiring but such is life and your recovery from it and end result came out super nice.
@RyanNiemer
@RyanNiemer 11 ай бұрын
The doweling jig was genius! So was the offsetting it. Great idea!
@DrewGrandechaincollision
@DrewGrandechaincollision 10 ай бұрын
For me the levels you went to were; simple enough with a touch of intermediate to hard to wtf. Man your experience shows so much. Loved the video
@Lincolnstww
@Lincolnstww 10 ай бұрын
Thanks!
@tracys3096
@tracys3096 8 ай бұрын
Those shelves look beautiful. Well done.
@nickchajec3990
@nickchajec3990 Жыл бұрын
Awesome job. I just finished a pair of floating shelves in my laundry room. I used the 3rd method here, constructing a frame and cut away some drywall. I only had 1 wall on the side to connect to, and the studs were annoyingly not 16" on center. I also chose to use a solid piece of hardwood for the front part of my 'burrito canoe".
@Lincolnstww
@Lincolnstww Жыл бұрын
thats a sturdy burrito canoe
@MLSteffel
@MLSteffel 11 ай бұрын
Great explanation of three variants of floating shelves! I may use one in an office remodel in our home.
@shaynesabala
@shaynesabala 7 ай бұрын
Thanks for another very useful video. I wanted to put these shelves all over my house but when I looked at the cost of hardware I ditched the idea. The second method puts me right back in it. Can’t wait to tell my girlfriend. She was sad when I said I’m not doing it. Thanks brother.
@theHessian666
@theHessian666 11 ай бұрын
The most imperfectly perfect woodworking video I've seen in a long time!
@roland20002000
@roland20002000 9 ай бұрын
I've been a site carpenter for a long time and at the moment trying to do a bit more interesting designery type stuff for people. This is the first video I've watched on this chanel and I got to say I love your techniques and the fact you can be honest about the general daily cock ups.
@moikeru1
@moikeru1 10 ай бұрын
1st shelf support, I like. I made several shelves in my home. Good point is easy. Bad point is the support bends little bit. Last one looks very good. I want to be an expert like you.
@mstrdtiger
@mstrdtiger Жыл бұрын
That live edge sliding door is beautiful, if I were you I would try to find/make some sort of curtain to cover the top rail! Or a wooden surround standoff kind of thing? And I bet those lag bolt shelves would flip the house over before ripping out.
I Don't Get Why People Still Use These Joints
17:26
Lincoln St. Woodworks
Рет қаралды 1,9 МЛН
Simple DIY Storage Shelves
7:30
Home RenoVision DIY
Рет қаралды 1,4 МЛН
When you have a very capricious child 😂😘👍
00:16
Like Asiya
Рет қаралды 18 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.
DIY floating shelves
4:00
Timber & Tea
Рет қаралды 1,4 МЛН
4 Floating Shelves From Beginner to Expert Level
18:14
MWA Woodworks
Рет қаралды 1 МЛН
Burglars Hate Me For Showing You This!
27:46
HAXMAN
Рет қаралды 3,7 МЛН
How To Hide TV Power Cord And Cables | Easy Way To Move An Outlet
13:46
Everyday Home Repairs
Рет қаралды 6 МЛН
Bad Beginner Cabinet Tips
24:21
Lincoln St. Woodworks
Рет қаралды 1,6 МЛН
The Most MISUNDERSTOOD Feature On Your Drill
13:41
LRN2DIY
Рет қаралды 6 МЛН
I don’t get why no one knows what these numbers mean
13:28
Lincoln St. Woodworks
Рет қаралды 901 М.
When an Engineer Builds a Nightstand
19:54
Fix This Build That
Рет қаралды 4,2 МЛН
How I build floating shelves | NO PLYWOOD MITER FOLDS
13:44
Everyday Builds
Рет қаралды 1,1 МЛН
When you have a very capricious child 😂😘👍
00:16
Like Asiya
Рет қаралды 18 МЛН