2 Ways to Repair Damaged Wood Furniture, by

[@RPKGameVids]

Your videos are very therapeutic to watch and listen to. You always do a great job too on the things you fix. 👍

[@FixingFurniture]

Wow, thank you! I appreciate that. Thank you for being a subscriber and supporting our channel! Scott

[@SDsailor7]

​@@FixingFurnitureDo you have a video on how to match wood filler to stain? I am trying to repair gouges on a speaker that has walnut veneer but the filler even that it's supposed to be walnut color does not match after being sanded. Thank you

[@mojoman2001]

​@FixingFurniture -- your favorite woodworking tools are plane as day.

[@sandysela6642]

I agree. I think he can always fall back on a career in narration. Very soothing and pleasant voice, great for commentating.

[@PureBloodWNC]

Dude, he turned around and started talking and I sub’d. There are some channels that ya just know. Not disappointed so far.

[@mjb12141963]

In this case where the piece is removable it's a no brainer making a new piece. Especially for my limited abilities. To me you are the Bob Ross of furniture repair. Very easy to listen to and enjoy.

[@FixingFurniture]

Thank you for sharing your thoughts on our videos. I appreciate that. Scott

[@foxylovelace2679]

These videos give me early 90s edutainment vibes and I love it so much.

[@FixingFurniture]

Ah, Hometime, This Old House, The New Yankee Workshop... some of my favourite TV shows! Scott

[@matthewbartolone7036]

Scott, I could live with either the epoxy repair or the new piece, both show your craftsmanship, the replacement overall is better looking. Thank you for sharing .

[@glena.guidroz8900]

I am 85 years old and have been woodworking for 51 years. I love your show and I always pick up a new trick from you. You asked which method I would use: A new piece of wood or putty the old one. I would have to ask myself "What mood are you in today 'Fester'?" If I am in the "don't bother me, leave me alone, go away, and get lost" mood so I would putty the old piece and move on. If I had a good night NOT worrying if I am going to make it through the night, I would 'boldly go forth', measure correctly, cut it correctly, stain it, fit it, and rejoice" What a damn good boy you are 'Fester' !! A real fan......Glen G, Houston

[@BarkingBeavers]

Love it, Fester! 😂

[@djfglobal3377]

I hear you Fester, you catch me on the right day and I’m doing all sorts of things responsibly 😎🇺🇸

[@johnbourne4603]

You’re an artist and true craftsman

[@BigGoucho]

That was a masterclass. Perfect thing for an early rainy night in Scotland.

[@FixingFurniture]

Glad you enjoyed it. Stay warm. Scott 🇨🇦

[@chrisb2557]

Enjoyed video very much. I like the no foolishness in your video. Great ideas and not an irritating voice so makes it enjoyable. Thx again.

[@kovaskovas]

I was today years old realizing that epoxy putty can be planed by a simple hand plane. Cheers! Love your channel! It’s so educational!

[@FixingFurniture]

Thank you for being a subscriber and supporting our channel! Cheers! Scott

[@RobertSiedentopf-nn8pn]

They both look okay ... and for us that don't have every species of wood sitting around ... THANK YOU

[@FixingFurniture]

You're welcome! Scott

[@usernamemykel]

You've got a new subber! NOT because I've furniture to repair, not because I have a full workshop full of specialty tools (which I don't), but because I'm a "handy" homeowner with lots of hobbies/interests/ household assorted repairs/modifications to do, and I have to admit, I love working with my limited tools solving repair problems and creating unique solutions. SO - here you are, obviously not only a master craftsman, but a master communicator, videographer, and know about good audio considerations, and a very pleasing personality. I've much to learn from you, and there's no better way than to "like" and "sub". MANY thanks for entering my world.

[@FixingFurniture]

Wow, thank you for your support. That’s wonderful to hear. As a handy homeowner you might also be interested in our Home Improvement Woodworking channel. Cheers. Scott

[@usernamemykel]

I'll check it out, thanks!@@FixingFurniture

[@christokaloudis2050]

I would like to say you are the bob ross of woodwork your voice and your videos are so relaxing and very educational thank you 😊

[@hotmeds]

Thanks for presenting both options a definite skill builder.

[@FixingFurniture]

You're welcome. Happy to share furniture repair skills. Scott 🇨🇦

[@My_Op]

Almost 100K, the silver plate from KZbin and your first milestone!

[@samuelmedina5700]

WOW! I watch the tv show "How is Made" all the time. this video tutorial is just as ENJOYABLE. what a Great Job. Thanks Buddy for Sharing

[@BubbasDad]

Very nice. I watched because I have a 100 year old Cherry card table that needs some minor repair. I am more of a fan of power tools, but really enjoyed watching a real craftsman at work.

[@rogerkaldahl9540]

I have always used epoxy wood putty to fill loose wood screw holes, I didn't imagine it could be used to fill the puppy toy. Thank you!

[@FixingFurniture]

Oh, interesting. I haven't tried using epoxy putty to fill loose screw holes. How does that hold up over time? I'm curious now. Scott

[@ChristiRich]

I find this channel to be relaxing and informative as The Woodwright's Shop that I watched growing up. Wonderful content!

[@joeguilfoyle1922]

This video was amazing. Thank You.

[@buzzing8365]

I enjoyed both the methods of repairing although I preferred the second method since I know I wouldn’t be able to deal with the first method . Thanks you . Greetings from Yemen 🇾🇪

[@agjohnsonandson]

Nicely done and great options for the customer. A couple of hints on the epoxy. Mohawk has colored epoxy sticks that assist with the color match. And, a chisel with a wet edge at the 15, 30, and 45 minute mark of dry time makes shaping a lot easier. Excellent job overall.

[@FixingFurniture]

Thanks for the tips! I appreciate you sharing your experience for me and others to learn. Cheers. Scott

[@broderp]

It seemed obvious from the beginning that you were going to use the new part. The chewed part could have been repaired flawless, and made to look new if the tine had been spent on it.

[@V8cars2]

I was looking for info on how to fix a loos chair and found this channel. after the first video i subscribed right away ! and have watched 3 other videos by now ! LOVE THIS CHANNEL !

[@rogerroger5585]

Beautiful work. Good to see the sliding T bevel getting its spotlight. This underrated tool doesn't get enough love. :)

[@FixingFurniture]

I never thought of that, but yeah, it's a simple but irreplaceable tool. Thanks for being a subscriber and supporting our work! Scott

[@grizzlygrizzle]

Mine is kind of ratty from decades of remodeling, but it a fabulous tool.

[@brotherjohndavid]

Great job! learned so much by watching your video! This somethung a student should attempt in a Woods class. Very impressed by your work-Thank You-John

[@Fullthrottle375]

Scott, that tenon fabricated was amazing! I know most won't understand until they've tried to do a normal one, forget that beast...lol

[@FixingFurniture]

Glad you liked that Shawn. I had fun filming and editing that section to show all the detail but not make it boring. Tenons can seem intimidating, but with experience, it becomes a "tool in your toolkit" for repairs. Cheers

[@jwpajak]

Your skill is fantastic. To pay you accurately for the work you did, one should be able to buy 2 of those chairs.

[@ellisc.foleyjr9778]

One of the things I always take away from most of your video's Scott, is the fact that you do achieve good results with hand tools, more so than powered tools. showing that a lot of repairs can be done with out the need for a full complimented workshop. And as always another great tutorial to help us Neophytes learn things thanks for sharing. ECF

[@FixingFurniture]

You're welcome. It's rewarding for me to hear you're getting so much out of our videos. I appreciate that. Scott

[@CleoHarperReturns]

Exactly what I needed and no special tools!! So glad I found your channel, thank you for this! Liked, subbed & all the rest.

[@Bernardgrubb]

I would approach this project by sending it over to you...I have nowhere near the talent needed to accomplish what you have. Great job.

[@sandysela6642]

My only option would be to use the epoxy. You had excellent results with it. You probably can only see the chew marks close up or if you knew they were there beforehand. Great video for someone who’s only option is the DIY approach. Very informative.

[@ambzcloud]

This is so helpful! My puppy has chewed up some of my furniture, and I feel confident now that I can use the wood filler etc. and stop stressing out. Great video!

[@jill552]

That was a great video. I love the pro vs DIY approaches. The pro technique was explained so well that if I had the tools, I think I could do it. The epoxy is a homeowners best friend.

[@zeca5150]

Thanks for the class!

[@FixingFurniture]

You're welcome. Thank you for being a subscriber and supporting our channel! Scott

[@rejej200c]

Once again you put the artisan in artist for me, thanks for the great video

[@billballeza377]

Definitely reconstruct rather than restore. Thanks for illustrating the difference.

[@FixingFurniture]

You’re welcome. Thanks for sharing your thoughts on that. Scott

[@fredbrooks8347]

So glad to see someone keeping those plane blades sharp. I It is a pleasure to see the plane placed on it’s side!New to your channel.

[@davidd1395]

As a woodworker and a shop full of tools, I’d make a new one as well. Very fine job!

[@-iIIiiiiiIiiiiIIIiiIi-]

This poor man is incredible. Bless his soul!

[@julieorr9975]

Omg thank you for changing the background music! Always great content thank you

[@FixingFurniture]

Oh, interesting comment. I love to hear how people react to my editing. Can you tell me more about your thought on the music? Thanks in advance! Scott 👍

[@carolinegray7510]

Enjoyed your video with Thomas Johnson very much. Looking forward to more of those.

[@flyingsawdustjemtz9226]

I truly appreciate your professionalism. Great communicator and great videography.

[@FixingFurniture]

Glad you enjoyed this video. Thanks for sharing that. Scott

[@joser1219]

Excellent and thorough

[@FixingFurniture]

Glad it was helpful! Scott

[@LaLaLand.Germany]

Well, I very much like the way You repaired it. The way You used that wax looked funny like soldering wood but in a nice way. Thanks, Mate!

[@FixingFurniture]

Glad to hear you enjoyed it. Thanks. Scott

[@danondler8808]

I appreciated the detail of your steps to show how to make the tenon, which I thought to be complex. Your finish insights were also great. Thank you for this video. I'm now a new subscriber!

[@richardbryant7972]

I prefer the making a new one on this repair, to many inconsistencies on the repaired one. Great video as always.

[@FixingFurniture]

Thanks for sharing that. Glad you enjoyed the video! Scott

[@lawrente]

I really enjoyed watching how you repaired and replaced the stretcher in the chair. I agree with using the replaced part as it best replicates the finish of the chair. Thanks for sharing your skills with us, Scott.

[@FixingFurniture]

You're welcome. Thank you for being a subscriber and supporting our channel. I appreciate that! Scott

[@glencrandall7051]

Both methods are good. I think I would go with the epoxy repair. I think it would be quicker that making a whole new piece. Thank you for sharing. Have a great day and stay safe.🙂🙂

[@FixingFurniture]

Thanks for sharing that Glen. Have a great weekend! Scott

[@katherineharper-sj4ys]

Masterful as always. I’d have to use the epoxy fill as I don’t have all the tools you used to create the stretcher. Thanks for sharing. I always learn something and this was no exception.

[@FixingFurniture]

Thanks for sharing that Katherine! I always love to hear how viewers would approach a repair. Have a great weekend! Scott

[@JamesDeese]

This complicate layout was made easy with this video. Thanks.

[@jimh4028]

I learn so much watching your videos. Very satisfying too.

[@Casjor2011]

I liked both fixes . I would do the epoxy repair. When can . Otherwise would replace the whole piece . You are very good . Thank you

[@danaowen9014]

I like how you spent the time to make the new runner, and thanks for showing us how to repair the original runner, i choose the new one.

[@FixingFurniture]

Thanks for sharing that and thank you for being a subscriber and supporting our channel! Scott 👍

[@twocents6363]

Awesome, I learned a lot. You are quite the craftsman and I appreciate your striving for excellence. Liked the maple repair best.

[@annebierce5280]

Thanks for showing both ways to repair. I prefer the new stretcher but cutting the tenon with all those angles would total intimidate me

[@JesusTorres-qr1gz]

Very neat indeed, when I was young I used to play with that, I still have some tools yet enough to help me out in my home projects, most kind of you for sharing it with us blessings to you and your love ones, from the endless summer paradise Puerto Rico Jesus Torres.

[@arnoldolorenzo3474]

I love the fact that you gave us more than one way to complete the task. Some might feel confident enough to do it one way, another might feel the filler might be easier.

[@isabelgutierrez8150]

Yes and if you are new to woodworking, those angles to copy and cut could be a challenge

[@someolddude7076]

I would have started with your option 2 first. Repairing the wood. And I would have completed the project by purchasing a new set of chairs. Thanks for a great video.

[@midcenturyflipper]

Amazing final result! I have a similar channel where I refinish and restore furniture. Absolutly loves it 🙏🏻

[@marchelleasp4280]

Very helpful and clear! Thank you!

[@FixingFurniture]

Glad it was helpful for you. Cheers. Scott

[@joankane-coleman1177]

I enjoyed your videos, very therapeutic indeed. I would throw the chair away and buy a new one, unless it was an antique

[@olivier2553]

Alcohol, like rubbing alcohol, or IPA is very good at cleaning fresh epoxy. Nice work on these tenons, they are compound angles in all directions.

[@FixingFurniture]

Thanks for the new tip on using alcohol to clean off fresh epoxy. I didn't know that. Glad you enjoyed the woodworking. Cheers. Scott #tip

[@boddumblues]

I would do splines on the original piece, building it up to strength and shape.

[@caroltanzi29]

Scott: if I had the tools I would go the route you took. However, it was most interesting to see what could be done with the epoxy. I love the fact, as an interior designer, I am gaining knowledge to be able to talk to a restorer/refinisher to get the job done professionally for my clients. I enjoy your channel. Carol from California

[@FixingFurniture]

Glad to hear you found it helpful Carol! Thanks for sharing that. Scott 🇨🇦

[@sandrawest2105]

I like the use of the new stretcher. There is a lot of “detail” work with the epoxy. Plus if the puppy cannot get enough chewing…he/she won’t be chewing on epoxy residue.🤗. Thank you for an interesting video, and I look forward to more. Happy Fathers Day! Peace 💫

[@FixingFurniture]

Thank you. Have a great weekend. Scott

[@ginocentofanti7151]

Absolutely loved it, Thank you for sharing.

[@alibobo2009]

Great! Thank you so much! It’s been puzzling to me how to color that epoxy. Been using it on this and that knowing it will always show the repair. This is great info. TYSM!

[@BarkingBeavers]

I would want to try both just for the experience. Nice work!

[@FixingFurniture]

Yes, that would be a good learning experience

[@ron.v]

As it happens, I have some chair stretchers my puppy chewed. When I get ready to repair them (after he's grown a bit), the things you've shared in this video will definitely come in handy. Thanks. My personal preference is to use wood filler rather than attempt to cut a new one. I lack the skills, the tools, and material to make a new one. Personally, I prefer the old one anyway. Yours looked more natural to me because it was aged looking which matches the rest of the chair. By the way, I subscribed.

[@janicehurlburt2573]

Great information and skill. Thanks

[@jcloo]

Thanks. Your videos have taught me quite a bit.

[@FixingFurniture]

Glad to hear it! That’s motivating for me. Scott

[@soofihasan]

Thank you. And glad to see you nearing 100 k subs. God speed

[@FixingFurniture]

Yes, getting closer! Thanks for your support! Scott

[@Miranda-cw9hq]

Another great video, Scott! Thanks so much for spending the time, effort and money (those wood epoxy tubes are not cheap!) to show us more than 1 method. As always, your final product looks amazing!! Be blessed!

[@rrome6178]

I thoroughly enjoyed your video! I appreciate your showing the two processes. While I would use the newly created piece, I would have to go w/the epoxy putty piece due to my lack of tools and skill level. You’re so calm, patient and thorough. Many thanks!

[@FixingFurniture]

Thanks for sharing that. I love to hear how viewers would tackle the repair. I appreciate that. Scott

[@rrome6178]

@@FixingFurniture it was such perfect timing for me because I have that exact same repair to make so it was great to have that guidance and options!

[@eternalfizzer]

Thank you very much for showing how a professional tackles a problem like that. I've got a couple inexpensive pieces with damages from a cat scratching them. You've given me some ideas how I can bring them back with a little patience and care. (In the past, I've made repairs with a mix of sawdust and wood glue, sanding and repainting, but the piece I'm looking at is more intimidating damage than I've tackled before. At least it isn't structural.) I'll take my time and make sure I get the shape right before I paint it. Thanks!

[@gaylinbradford2749]

Well done !!

[@FixingFurniture]

Thank you. I appreciate that! Scott

[@HowardJohnson-r3f]

Liked both fixes.

[@johnkruk6929]

Top job well done thanks for sharing your know how 🌟

[@richardhutchinson4016]

Thanks for the great content. I think I would have tried to router out flat on each side to inlay a new patch. Probably more work than either of your techniques but I always try to save the original wood if I can. Thanks for the great videos, always interesting to see how someone else tackles these challenges

[@adama163]

This video was super helpful to me. I have a similar repair on a kitchen counter height chair. In my case it wasn't the dog but rather the kids standing on the stretcher. I will be doing the replacement approach since the stretcher is cracked pretty badly. Was struggling with the angles of the tenon so watching you was very instructive!

[@HS-yk9he]

Great idea for using metric; it's accurate and easier. Great video.Thank you!!

[@FixingFurniture]

Glad you like it! Thanks for sharing that. Scott

[@ElBrooklyn1]

Also, metric is most likely what the shop that built it was using. If it was an older American or English piece, you might get a more consistent measurement in inches and eights/sixteenths.

[@MASI_forging]

What an awesome project 😃😃

[@arnoldolorenzo3474]

Wow. Magical to see you work. I think it’s important to teach people how to fix things instead of going out to get new stuff with none of the quality of the replaced item. Things are just not made well anymore.

[@byhammerandhand]

One technique I use when using epoxy fill is to use some soapy water (water with a few drops of dish detergent) to help do the shaping and smoothing. A lot of my work was on-site and fixed charge, so I would have probably used a toner to do the coloring to speed the process. Guardsman Black Cherry or Mohawk Newport/Ebonized Cherry looks like it might have been a close match. Most furniture like this has been finished with a lacquer toner anyway. And I normally used a non-wax burn in stick for the little fills. I have two types -- a hard one and one that's a little bit softer for areas that might receive a bump over its life. Non-structural repairs could also use Bondo or some other mfr's equivalent. I remember once fixing a dog chew on a rather complex base molding of a cabinet. I used the Bondo and it took quite a while to get the molding profile cut back in. Once done, the customer said it was a great color match. An hour doing the fill and 5 minutes doing the color match!

[@grizzlygrizzle]

I'm coming from a carpentry background, not a furniture background. I have used the Minwax bondo (High-Performance Wood Filler) in many applications, and when I have to stain it, I sand it with 80 grit, or even 60 grit to leave some grooves to accumulate more stain and imitate grain. (I convince myself that it works, but tbh, not very well.) -- For cutting out moldings, I have lots of experience. For some years, I was doing restorations on 1-1/2-story tall, pre-WW-I ornate mahogany entranceways for apartment buildings in Boston that had suffered UV damage, and required scraping away the surface layer of wood. These jobs were about $10K each, and that was below the market rate. Some had Corinthian column-capitals, with carved acorns and oak leaves, and some of the moldings were built up to the point of having over 40 distinct surfaces to scrape and sand. -- Doing this on moldings was made easier by a no-longer-available Craftsman detail scraper (Hyde makes one, but the shapes are not as good). It's a handle to which are clamped various blades, held at about a 75 degree angle to the axis of the handle, by means of a retractable t-rod that fits through a keyhole in the blade. Three of the blades were rectangles with one end rounded to a radius, 1-1/2" wide, 3/4" wide, and another 3/4" wide one that was tapered to get down to about a 1/16" radius. There were a couple of assymetrical pentagons, one tall and the other one very flat, the flat one with ends like angled chisels. And the last one was like an arc from a 3" circle, flat on the other side, like a semi-circle but flatter, that used about 1/4 of the circumference. All of the edges were sharpened, and the resulting scrapers were very useful. Eventually I had to get a metal fab guy to make me new ones, because the old ones had been sharpened down to being too thin to fit well on the handle. -- This kind of scraping gets into shaping, and the angle on the handle was very helpful. At any rate, I was able to get nice, sharp grooves with these tools. For sanding, I tried out a few detail sanders and found them useless. I ended up using strips of credit cards about 7/8" wide, with 1/16 of a sheet of 80 grit wrapped around them. (I always found Norton Pro-Sand to be the best. 3M clogs too fast and doesn't cut as well, except for their stretchy plastic sandpaper which is useful in some applications.) -- For exterior work, I use Sikkens Cetol Marine varnish. It's an alkyd varnish that stays somewhat flexible, and has UV protection, and it lets the grain show through a lot better than the Cetol residential products. (Corporate rearrangement led to the two lines being made by different companies.) The marine product is easy to clean up for maintenance coats-- wash with TSP and a scotchbrite pad, rinse, dry, and recoat. They recommend every two years, but it looked pretty good after six years, being in a non-marine application. -- And when applying any varnish over oily woods like mahogany, it's imperative to wash the wood down with acetone or laquer thinner, to get the oils out of the surface of the wood, just before application. Otherwise the color comes out all splotchy. Been there, done that.

[@eugenepiurkowski5439]

Thank you. Not only did you give us options, but you also did a great job teaching us. I agree that sanding would have helped the repair but also would have used the new piece. Having worked in the woodshop in my school, I am a rookie at finish carpentry. I have also used that same type of filler in household projects. Bravo to you!

[@iaingraham4911]

Excellent job

[@paulcanfield4157]

Just glancing through the comments I didn't notice anyone mention a third or 4th technique, the third I used a couple times. Cutting out the affected area and using real wood as the filler. With the damage on all sides I get that it would be more difficult than say just one side. Works in a splint like fashion. The fourth technique is to completely cut out the affected chew area and splice in new wood, with how you were meticulous to saw the joints I could see you doing that. With the stain as dark as it is it would be easier to cover up if the whole piece is sanded down and redone in it's entirety. It could also be that the video doesn't capture the tone and grain as well. Unquestionably quality craftsmanship regardless! 👍

[@FixingFurniture]

Thanks for sharing that Paul. Yes, both valid techniques. My preference is the whole new piece, but I come from a woodworking background. Cheers. Scott

[@garykorzelius5930]

Another quality video! I like the way you work as much as possible with hand tools. This is my preferred method as well. I just seem to be able to accomplish better accuracy by hand and eye. Thanks!!!

[@FixingFurniture]

Thanks Gary for being a subscriber and supporting our channel. I appreciate you sharing your thoughts as it helps me understand what resonates with viewers. Cheers. Scott

[@krzysztofccc2705]

Przy starych meblach i małych uszkodzeniach lepsze jest łatanie, ale w tym wypadku ma Pan rację, lepiej wymienić element. Bardzo dobrze wyszło. Zdrowia i powodzenia życzę.

[@usernamemykel]

Agreed. ???????????????????????????

[@briannewton3535]

I don't have a dog, I don't have chairs with stretchers, though I do a bit of woodworking, and loved this repair, Kudos!

[@FixingFurniture]

Glad to hear you liked it! Scott

[@pitsnipe5559]

I have one of those t bevels that belonged to my wife’s grandfather, must be at least 75 years old. Thanks for showing how to color match that new piece.

[@HWCism]

Nice repair,thanks

[@jaensara]

¡Great master! Ud. siempre nos sorprende con las soluciones en las restauraciones de muebles. Gracias por compartir sus conocimientos y experiencias. Nos enseña que no solo hay una solución para una restauración, solo hay que echar a andar la imaginación y la experiencia. Muy bien explicado y fácil de entender aunque no hablemos el mismo idioma. Felicitaciones, éxitos y saludos.

[@robertlivingstone3947]

Great video and great job

[@FixingFurniture]

Thanks. Glad you enjoyed it! Scott

[@duffy4996]

nice job! learned a lot with your teaching approach. I might have tried autobody glazing putty to fill the small imperfections....I have used it before and it works but do not know if it would take the stain perfectly. I did not know about burn in product. thanks.

[@bhagyeshg.1823]

great job best done. Mumbai India

[@davidarchibald50]

Nice work. The original has obtained or retained imperfections that add an aged look, and the new stretcher looks beautiful and a great challenge to make. I guess it comes down to what the wife was looking for and how much trouble the dog is in.🤣

[@anonz975]

I have a few pieces with "nibble marks". The new stretcher looks perfect! But if I were doing it I would probably use the filler as it seems easier for a layman.

[@charlesbrack7017]

I would have gone with the new stretcher as you did unless the client specifically asked me to keep the original piece. In either case you did a fantastic job, and as always I learn so much from you. Thank you for your videos.

[@FixingFurniture]

Glad to hear you're learning from our videos. That's my goal so your feedback is rewarding. I hope you subscribe. Thanks. Scott

[@jeanine6492]

I’d use the new stretcher. Great informative video, love these types- keep them coming!

[@FixingFurniture]

Awesome! Thank you for sharing that! Scott