2 Year Review with FiTech EFI

[@280zone]

Please dont regret making these videos. I own one (yet to be installed) but have found your videos extremely helpful. Just knowing what might go wrong helps tremendously as i move forward. I find your videos very honest and straight forward not just "it sucks".

[@markhershey8372]

John, you are why I went with Fitech on my 73 AMC AMX 360, and you are why I enjoy driving it today. I had many of the same issues as you including vapor lock using the truly abominal Command Center and issues with the truly abysmal electrical connections to the handheld display. Worked through all the issues (without any help from Fitech) by just pushing on and tweaking settings little by little. Would i do it again? You bet. Any device capable of real- time analysis of multiple sensor data and real time compution and control to deliver a proper mix of fuel and air is gonna be a nightmare of complexity internally ; Fitech makes it about as easy as anyone could for us folks whith no automotive Engineering degree. Room for improvement? Absolutely. You pretty much covered it. So, please know that you and several other folks who take the time to share their experiences, good and bad, are why I still love this hobby. Thanks, ignore the haters, and keep letting us know of your progress.

[@NashvilleEarlyBronco]

Love it! Thanks Mark!

[@gregpennington5305]

Please no regrets. I have a Fitech on my Motor Home. A Ford 76 E350 platform with 460. My problems have not been directly related to FiTech. Your tuning suggestions have been helpful. Thanks!

[@NashvilleEarlyBronco]

Thank you!

Please don't regret your experience with FiTech. You've helped me, and im sure others! I have a supercharged sbc 350 in the 600hp realm. It's running perfectly because of your help. Thank you very much!

[@NashvilleEarlyBronco]

Thank you! Appreciate your encouragement

[@Baggarroni]

Good video man! About to install one in my 50 Chevy pick up.

[@mikem9541]

I installed my FiTech due fuel percolation problems on warm summer days. I'm good with a carb, but just could not keep the fuel from boiling out of the accelator pump chamber on a new Holley 4160. I tried everything less a cold air system, which was my next move until I accidentally found the FiTech at a much lower price than traditional efi systems. I took the plunge and have been trying to make this work. Your videos have been incredibly help full. Hats off to you! The First Fitech go efi 4 kit I received worked for about 2 weeks with no actual on road driving of the truck. The unit went dead the first time the the engine heated up enough to start the fan relay at 185 degrees. Calling FiTech does take some time and it was very frustrating to have to through things again and have to return call several times. Definitely not happy with FiTech customer service. I finally had to send the unit back. Very disappointed after spending money on a damaged unit. When the new unit arrived, FiTech stated that they replaced the ecu with a newer "more robust" unit. So I had to reinstall an all new wiring harness because it was not the same as the first unit I received. The plugs were different size and were wired differently. My first question is ----- why is FiTech sending out "less robust" units in the first place? Why not send out the better quality unit to start with? I seems to me that FiTech has some older units that they need to move and will trouble shoot them as they go..... To continue, I have had few problems since the new ecu. Your videos have fixed nearly all of my problems. Thank you. The fuel percolation problem is not an issue due to fuel pressure and fuel tank return lines. The FiTech opperates totally different than a carb. I have no power increases and it runs nearly the same except that the throttle response seems slow as compared to a carb. One of your videos talks about changing that adjustment. I will try. I feel that your above video was a very fair evaluation of the Fi tech unit.....MM

[@NashvilleEarlyBronco]

Ouch! Sorry man! Glad I could help where I could

[@terryhollingsworth2084]

I just installed my 4th FiTech system and we’ve learned a few things about it. Three were throttle body and one was the Ultimate LS kit. I have to say the LS kit is much better and easier to setup with a couple of exceptions. The 4L60E wouldn’t shift at all so I finally found out that you have to go in the speedometer correction and change the default setting which was 200. After I changed it to 400 it works great. The other issues is vacuum ports on the bottom of the intake and the side of the throttle body. The one on the throttle body points dead center of the throttle cable when you use their cable bracket which you have to buy separately. The fittings that come with it are straight and they point directly toward the valley cover so you have to get elbows for that but the next problem is that the 1/8” fittings aren’t NPT so I had to retap them too. Also until it warms up it sounds like a massive vacuum cleaner under the hood at idle but there is no leaks, it’s just the intake air. Other than those issues it runs awesome.

[@jayapranahurip1271]

I own FITECH GO EFI 30003 since 2016 purchased from Summit Racing and its still running just fine up to now. The hardest to solve problem I encounter was when the RPM keep running high when engine is hot ... and the spark plug keeps failing once in a while. It turns out that I have to move the fuel filter from the engine bay to the back of my jeep near the fuel tank ... as when hot the mesh inside the fuel filter expands and cause a partially clogged situations .... and then the RPM is raising and also the A/F ratio becomes rich .... I saw this from the handheld controller and by inspecting the plug it was wet. I also put in a CDI box to prevent this from happening again ... ensure the fuel will burn on what ever the FITECH is throwing the A/F ratio ... makes it easier to trouble shoot problem ... I am using a Pertronix Digital HP 510 .. great product and running cool ... very happy with the box and my FITECH also .... since then the setup is bullet proof ... my jeep is a CJ7 year 1981 with XJ 4.0 inline six engine + Isky 282 cam with MOPAR valve spring to accomodate the cam valve lift ... FITECH EFI GO STREET 30003 and DAVIS DUI distributor with Pertronix HP 510 CDI box

[@jayapranahurip1271]

To add a bit ... I think if you buy a more expensive system ... the problem will still be the same ... I mean hard to solve for me especially as I am not a mechanic and this is just a fun activity although sometimes turns out tube pain in the neck .... it takes me almost 8 months to solve the wet plug + clogged fuel filter issue ... I finally gave it up and try a last action by sending mail to FITECH support ... to my surprise they responded right away and helped me since then .....

[@NashvilleEarlyBronco]

Yep

[@doingstuffwithdan9692]

I am in the process of fitting a Fi-Tech EFI to my GQ Patrol. Ive watched your videos and they have helped me heaps. Thumbs up for your videos, dont listen to the haters. Not everyone can afford Holley EFI, so far, Fi-tech is a good entry level EFI kit.

[@NashvilleEarlyBronco]

Thank you!

[@doingstuffwithdan9692]

I'll let you know how it goes when I get it properly tuned and on the road

[@captsam54]

Thanks for making all the Fitech videos.. Their helping me..

[@gregorypass5604]

Dude on the feedback, screw the negativity! I’ve been researching different ways to efi my bug and your videos are all over. Valid points, user error, hardware faults and all so far in comparison for my application it’s top of the list! So let this serve as the feedback that helps Fitech refine the issues stated. Great vids and input, thank you...

[@tedler2008]

Nice review. Most folks don’t understand what Fi-Tech has done to the fuel injection market. Price point, self learning throttle body injection has revolutionized the automotive aftermarket. Holley is no better in terms of support - although the brand name does create a calm about it. Let’s just state the facts, putting a sensitive piece of electronics on our shit boxes will have risks. Most people don’t design a fuel system or establish a ground plain that aids in these installations. Marketing has tainted the entire self learning platform with the word “easy”. I hate say it, some of us shouldn’t have wrenches in our hands. User error is likely in every installation. Just think of the phone calls these places get for support? It would you to drink. Great video and I appreciate your honest feedback!😊

[@Superado2006]

Keep it up and don't get discouraged by the negativity out there... it's a proven fact people are 10X more likely to complain then to praise... so you have to let it roll off your back. God bless you!

[@NashvilleEarlyBronco]

Thank you!

[@GrenadeMotorsports]

Doing a build now and considering this setup. THX for posting, well done!

[@pigidly]

Would the SniperEFI be better 🤔

[@dennisshappka2440]

Dennis S1959 Hi --- dont worry about the Haters, We are all allowed to share our views, --- Keep making the videos ....... as watching your video and others gives info on products, and "Product Honest Reviews" are imperative to making the best purchase possible. I have watched other videos, that have no issue with the FiTech and never changed the factory settings. Keep making the videos, ... Please

[@NashvilleEarlyBronco]

Thank you!

[@erikjuno6687]

I've watched quite a few of your videos about the FiTech and other things. I had planned on putting fuel injection on my bronco this month, but I'm pushing it back to the fall, after seeing the various issues that can come up. I was planning on doing the ProFlo4 because it seems like a good total package and pricewise is really no more than a FiTech or sniper when you add up the manifold, distributor, fuel pump, lines and other things. Now I'm looking forward to your ProFlo install. Keep up the good videos.

[@MattsGarage]

Can’t believe you got thumbs downed. FiTech staffers must be watching you. :-)

[@NashvilleEarlyBronco]

Haha! I get at least two thumbs down every video these days

[@VinnyMartello]

I'm still considering a FiTech for my 66 Chevy (daily driver). But I am pretty happy with my Quadrajet. I get decent gas mileage for a 55 year old truck. 17 mpg at best. Good power, and stone reliability. I'd love to see a Q-jet/FiTech head to head. Maybe I'll have to do a video some day!!!

[@NashvilleEarlyBronco]

Do it!!

[@Matp345]

Thanks for the video. My biggest concern is reliability. The last thing I or anyone else wants is to be stranded especially with a system you can't fix roadside.

[@jessiegarcia1734]

Your videos have helped tremendously, THANK YOU!!!!!!

[@NashvilleEarlyBronco]

Happy to help!

[@slick-px4pq]

This is not an endorsement for any brand, I asked my mechanic if he knew anything about any of these systems. He has helped a number of customers and friends work thru issues with Holley, MSD, fitech, and edebrock. He recommended MSD based on his experience with 2 different vehicles. He was mainly impressed with their tech people. He says that overall the MSD was just easier to tune to the vehicle. In most cases problems were the fault of installer. Out of all the systems he helped with the fitech was the only one that got sent back. Installation issues we're mainly weak battery, weak alternator, bad grounds, and just bad wiring practices in general. His take is that any of these systems WANT to work but the install/conditions need to be perfect. I forgot to add this part: the first fitech he worked on was about 2 1/2 years ago, it got sent back. He did one about 6 months ago and the previous issues were gone.

[@cad974]

I follow all your post about EFI and I love them. You help me to choose between carburettor and EFI. And between FiTech and EDELBROCK. Thank you guy 👍 Fred in reunion island

[@NashvilleEarlyBronco]

Thanks Fred!

[@cad974]

I hope can install a 35950 efi edelborck on my 351w (74 gran torino)

[@cad974]

I hope can install a 35950 efi edelborck on my 351w (74 gran torino).... it is not too high ? I hope the air filter not touch the hood. 😕

[@juiced71]

Nice review ... I follow a guy with an 8 second turbo camaro who loves it .. I wanted one big time 👍🏻 but I am thinking the Holley sniper might be a better way to go .. I have all the features of fitech and sniper .. can use nitrous can do blow through...fan control just a lot of great features... I appreciate you doing these vids it really helps to. Get an honest opinion on stuff ... So If you could buy the sniper and put a turbo on your truck that would help me a lot hahaha!! Keep up the great vids man!! I don’t respond a lot but I always watch and like the vids!

[@willlennon6585]

1970 Bronco. Amateur mechanic. Installed Go Street 400hp and the FCC2. Its not on the road yet, but cruising the neighborhood has been great. FITech is smooth and no issues with install. Much like mentioned in the video, the only issue I have had is running out of fuel.

[@NashvilleEarlyBronco]

That’s awesome!

[@willlennon6585]

@@NashvilleEarlyBronco On the road now. So far running well.

[@flbartlett]

My friend just picked up a 77 El Camino that has a new crate engine, rebuilt transmission, and new FiTech 400HP for $2500. Receipts show that the previous owner had put over $8000 into the car. I credit a botched FiTech installation for the owner becoming disenchanted with the project and dumping it. Upon initial inspection, the FiTech system appears to be installed correctly. The problems start where the engine wouldn't idle down below 1300 rpm, and it stumbles and stalls when driven. Also, the fuel pump whines and howls so loudly that it can be heard a hundred feet away over the engine and exhaust with no muffler. I think whoever installed the FiTech was treating it like a four barrel carburetor. We fixed the high idle by adjusting the rear butterfly plate shaft stop screw. It was turned in so far that is was simulating a vacuum leak, and the ECU was compensating the best it could. Now it will warm idle at 650 RPM, but it still randomly stumbles and stalls. The next issue to address is proper fuel delivery. The fuel pump and filters are not installed in accordance with the instructions. We'll put the pump and filter installation right, and verify that we have proper fuel pressure and volume delivery. The theory is that this will solve the stumble and stalling, and perhaps even quiet the fuel pump. I'm learning as I go by gleaning knowledge from KZbin channels like this one. Maybe this will end up a FiTech success story. It certainly wasn't for the previous owner.

[@markmcc1]

I have the fitech gostreet 400. Agree with your comments overall but I'm one of those people that hasn't had any issues. In terms of the controller, the user interface is very amateur but I'd say 5 out of 10.

[@VinnyMartello]

Any gas mileage imprevements? I daily drive a classic.

[@NashvilleEarlyBronco]

I didn’t notice huge gas mileage improvements

[@65sohc]

I just bought a 65 GTO with Fitech. I have to say that I completely disagree with your statement re: ease of use. I think the handheld is very user friendly. The fact that you can program it without a laptop is a huge plus.

[@frankiealvarez2891]

Honest good review. Don’t feel bad.

[@NashvilleEarlyBronco]

True

[@mikewoolie5153]

I did the research, at Bronco days (Knotts Berry Farm) to see who had EFI and if it was do-able. What I found is port is better than manifold injection, the only hard part was where to mount the computer. Back then there was a lot of help from Ford Performance. Not so anymore. I installed roller rockers and lifters, used the Cobra Mustang setup into a 71 block. With the set up you can go from stock 200hp to 700hp just by changing the computer and a few parts, but it's stock. With the stock 200hp set up I get 21mpg. Have the 300hp set up but I got tired of burning rubber by accident. System runs great love it. Not everyone will be willing to go through the expense and hassle to wire the system in.

[@duckmanemt]

I feel your review is pretty on point. I have had my FiTech about 2 years and I know I have commented a few times on the FiTech. I will say this, until I took my car to someone who really knew the system, I felt like nothing I did was going in the right direction. It was stated to me that the more options you add to this system the harder it is to control.. ie. timing control etc.. Once found the sweet spot in the timing, everything seemed to come together with a little less effort.. There are a lot of people bashing the system, the people I talk to "SEMA, PRI, and car shows" generally have the same complaint 1. Controls are crappy, and adjusting is a pain" 2. the plugin to the controller is the worst. 3. with the base model, you can't hook a computer to it.. With the Holley Sniper, at least you can hook a computer to that one. I just want to say thank you for the videos, they have been a tremendous help in my situation and got me going in the appropriate direction till I found a tuner. Thank You !!

[@alpinegarage8548]

I like the your feedback segment. It’s an important point made.

[@GruntGuitar]

Vapor lock IS a Fitech issue. What else would it be?

[@merstrand]

Your videos were a big help ! Many Thanks From Denmark..

[@NashvilleEarlyBronco]

That’s awesome! Happy to help

[@dankirk3290]

Backyard mechanic who talked to numourous Pro mechanics and they all said go with Holley Sniper . They had nothing good to say about FiTech EFI

[@duanedahljr1669]

I've been running a Sniper for 2 years now...it has its issues as well, idle setting is a PITA you can have any idle setting you want, as long as you like 900 rpm. I bought the Fitech 2x4 setup for my street machine in January, but found out the other day that Holley is releasing their Sniper 2x4 in a couple of weeks.:(....fuck it, I've seen the other side of the grass, wasn't as green as I was hoping for...great vid btw

[@goobermintheretik1454]

Ive said it before, FiTech isnt paying you enough. But Im gonna browse Edelbrock B4 I choose. Im gonna need one of their Sump Pumps and who knows if itll be compatible with FiTech. Wont tear into OEM fuel tank on '70 CST-10 for a FiTech pump. Cant get them to respond to queries.

[@NashvilleEarlyBronco]

You should check out my FiTech Edelbrock comparison video too.

[@406_chevelle8]

Heres my review after 2 years of being an owner. " I'm going back to a carb" yup plain and simple. A buddy got his before me and both of us has had more patience than ever. He is inches away from just doing an ls swap it's that frustrating.

[@akudamatada1]

You mentioned vapor lock, what was the cause of the vapor lock? And how did you resolve it? Dont worry about the negative comments, everyone have a belly button.

[@properteaproperty]

FiTech needs to address: hand held plug in, the poor quality fuel pump and the way they deal with customers on the phone. 35 mins on hold is insane.. Once i finally got my FiTech set up.. It works very well., but its been so painful to get to this point. Id never buy another and warn others off buying their crap

[@bronco788]

Edelbrock is no better on support. agree the hand held does look cheap. i have the E street 2 and it's not a cake walk either. i've been on hold with them for awhile before and their e street tech comes in at 8:15 while other techs start at 8 lol. are you still running efi? what brand? thanks

[@Telecom186k]

Is FiTech the best? Can you name the best three brands? I have a 1963 Impala SS w/ 327. I’m gonna add fuel injection soon. I started researching two days ago.

[@pistnbroke2]

I've had the Fitech 400hp model on my 400 sbc for the last 2 years. The only problem I've had is the temp sensor failed. You are right in saying that the temp sensor is out by 10 to 15 degrees. I replaced mine with a new one from an auto shop and it's reading is out too. Other then that I've had no issues what so ever. I have fine tuned mine after a lot mucking around and watching videos and it runs great.

[@demetrij7120]

any idea why a car wouldnt fire right up with it? it takes like 5-6 tries to start up as if its not getting enough fuel

[@stanrayborn926]

Thanks for your honesty with your fi tech .

[@NashvilleEarlyBronco]

👍🏼

[@kajbyman3006]

2 years was enough for me..I went back to a Holley carb.(sbc in a boat)I had so many issues with my Fitech.If ever going EFI,i am going to buy a motor with OEM fuel injection.

[@armygreenfj3924]

How many miles did you put on the Fi-Tech?

[@bowtihi6830]

I installed a fitech 30005 on an admittedly very tired big block chev. I knew in the next couple of years I would be rebuilding the eng. The install was pretty simple and the vehicle fired right up. Not being an everyday driver it took a few drives to get it running good and I never did get the cold start worked out. Well I had maybe 1000 miles on the TBI, I was driving along great one minute and the next I was loosing power and found my self dead on the shoulder. My thought was , well Ive put to much power to this tired engine and I guess it finally couldn't take it any more. After a tow home I was thinking I would find water in a cylinder or something like that. After pulling the plugs and not seeing anything unusual I did a compression test. Again found nothing there other than low compression ( 122 - 129 lbs. same as the last test ). Well the following week My wife was diagnosed with cancer, so the vehicle was put on the back burner for a year. After she won her battle and things got back to normal I decided it was time to pull the eng and do the rebuild I was planning. I never did find anything out of the ordinary upon teardown that would have caused the eng. to fail. Now Im starting to wonder about the EFI, but at this point I continue on and head to the machine shop with my block. Well then covid became an issue and the engine sat at the machine shop for another year before they finished there work . Well after finally getting it put back together and breaking it in on a holley carb, it was time to put the fitech back on...it wouldn't run beyond idle. I found it was soaking the plugs and the smell of fuel was evident. because of it being over two years now I have no recourse and I decided to switch to a Sniper. Runs great now. Anybody want to buy a 30005 fitech with about 1000 miles let me know .

[@kameronferguson3110]

Do u still have it!?

[@ShenRC]

Temp sensor 15 to 20 degrees showing to high or low on the temp? also would be nice to link the proper temp sensor also so people can get one. Good 2 year review.

[@thecynic807]

How can people be negative. I would ask questions like what settings did you use and how much better gas mileage are you getting. What distributor are you using.

[@navyav8r653]

Review Kind of starts at 2:22.

[@arzagg55]

The fitech efi good work with 50 degre culisus in my country ?

[@claudearmstrong4055]

im installing a Fi tech on a vehicle with an EGR valve. Do I still need the EGR to pass emissions with a Fitech Fuel injection>?

[@drdjh2003]

Did your gas mileage improve?

[@briansuderman5597]

I think this is wjat everyone wants to know

[@jpritch2]

uh... what about your fuel pump issues? resolved?

[@arzagg55]

I have a stock TBI distributor, is it ok to connect it with fitech 400 and how?

[@arzagg55]

Is it good for daily use and the temperature is very high up to 50 degrees Celsius in the summer? Help me

[@demetrij7120]

any idea why a car wouldnt fire right up with it? it takes like 5-6 tries to start up as if its not getting enough fuel

[@davejames2015]

Do you need a return fuel system?

[@LionsTigersBears]

Fi tech doesnt live up to expectations. It has hot running issues. When car gets hot it vapor locks and stops running. Also the fuel can starves the runability of the unit. It is not a road tour fuel injection unit to drive long hauls.

[@travisfamilyoutdoors5957]

Just put a video up or my 1979 chevy luv that has a fitech efi 400 on a 305 chevy cause i watched all your videos and choose fitech glad i did thanks to you see is a daily driving truck im in lavergne tn also thats why i watch you

[@stillwaiting4315]

I have a meanstreet 800 for starters it is a no power adder and they don't run worth a shit on a motor with a big cam.So how many 800 hp engines have you been around that have a mild cam and no power adder? Unless you need to run on steep hills 🏃 as fast as you can from this p.o.s and if you need to run on steep hills may I suggest an ls

[@groverjarrett8701]

As far as the thermostat, did you do the latest firmware and did you record the ohms at each degree and adjust it in the programmer? If you did my you will see a degree difference.

[@NashvilleEarlyBronco]

Ah! I didn’t do that

[@dylanwest5356]

everything u said was 100% the truth... thank u sir

[@jeffe4638]

I just ordered a chevy 350 engine with fitech I hope its worth it

[@066motocross]

I'm thinking about installing efi on an 83 Chevy k10 pickup. I'm a little confused about it concerning staying with the stock hei distributor. I really want efi and a crate motor is about a year down the road. I just don't know what to do. I can tell you that I'm not a quadrajet expert lol. Which is why I'm considering efi

[@jeffe4638]

@@066motocross I'm no expert myself this is my 1st time messing with efi I hope it works out and wasn't a waste of money

[@FireItUpGarage]

Thanks for shooting straight on the system.

[@jimpalmer4061]

Bro, thanks for this. I couldn't agree more. I M struggling with it wanting to die after it has been running for a half hour, and nobody can tell.me why. Any ideas?

[@weavera1970]

Are you using the fiTech Command Center? It seems some people are having an issue with the pump running too much and heating up and boiling the fuel causing vapor lock. I found this on a forum post: ...spoke to him again today and (in his words) due to my feedback (and complaining), on all the new EFI setups, there will be another parameter to set on the EZ Start menu. It will be Pulse Width Management percentage setting for the fuel pump. Supposedly all of their EFI setup's PWM default to higher settings, normally only used for an external, or intank, pump withat a return lin used. The FCC pump is a dead headed 340lph, compared to most common external, or intank pumps being 255lph, or even 340lph with a return. The 340lph dead heading FCC pump overheats, which boils fuel out of the vent, which then blocks the venting process....a snowball effect. Actually makes perfect sense...

[@jdcarguy1242]

Like the review. Fitech is way easier to set up over running something like a stock ecu with hptuners.

[@ikillyoudead]

A haltech is much easier to setup and tune with the proper harness, and you can keep your factory fuel injection

[@duckmanemt]

What Thermostat did you end up purchasing? I'm having the same issue

[@mplante7352]

Your in love with fitech.. . Guess I wont be seeing that pro flo system on that engine any time soon.

[@NashvilleEarlyBronco]

I wouldn’t be too sure of that. It’s on there right now, just have to edit the video 😱

[@mplante7352]

@@NashvilleEarlyBronco so my reverse psychology is working I see.

[@NashvilleEarlyBronco]

Haha! You got me!

[@xxwes997xx]

what abt the gas mileage...better?

[@jeffreystelling3395]

I'm actually going to edelbrock avs2 carb. My Fitech has not been good for me. Was a pain to get it set up to where it was running decent,I even copied most of your settings for my 302. Then it got to be inconsistent. One day it would start and run great,the next it would backfire and die while I was driving. After all of that I'm just going with what I can afford at the moment,which is carb. Maybe later on I can get the motor freshened up and depending on your opinion on the pro Flo 4 I may go that route. Thanks for all the vids👍

[@tazone1121]

How much have you used it in a off road situation? I would be interested on the durability of the unit and the electronics, in a harsher situation.

[@NashvilleEarlyBronco]

Off-road it is great. I think where it struggles is in the heat, under the hood temps rise and it causes problems

[@wandahelmer1038]

I jump in, set the choke in any weather, turn the key,,,,,vrooooom runnig, I will keep my carb all day long then go thru that, $ 2000 will buy allot of other goodies my ride needs.

[@V8March]

2- thats why MSD is expensive. With your CAN harness this will never gonna happen

[@jwjr2197]

The early fitech did honestly have some interface issues and connection problems ...I had similar problems also fitech was cool about I did a pro-rated exchange ...they wanted it for some R&D to see what had failed ....and my second fitech has been trouble free so far and honestly I think it runs better this time around

I have the go efi 8 1250hp unit.. It runs perfectly on a supercharged sbc 350

[@chuckdburns8558]

Have you tried the 2bbl efi system? I been looking at that system just to try save a little money. And will it work under boost? My target is 6psi single turbo...

[@NashvilleEarlyBronco]

I haven’t tried it

[@kennethhudson8013]

Don't you need to replace your gas gauge?

[@NashvilleEarlyBronco]

Yup

[@kennethhudson8013]

Put you a electric fuel pump in your gas tank. No more noise!

[@hankfink]

I daily drive a carbureted car all four seasons and I gotta say a lot of times it sounds like people compare TBI systems with old gunked up carburetors.

[@aubreya2641]

My little 2 bbl out drove two FiTechs on a trail last year.

[@DR440]

Would you go for the Fitech or Holley Sniper?

[@martinrichter1596]

go with the holley sniper it's a way better unit. my fitech shit out after 2 years and the techs at fitech pissed me off with their bullshit. my truck was down for 3 months until i said fuck them assholes and installed the sniper EFI. my truck is running great now. fuck you very much fitech.

[@Handlehandlebars]

I was going to look into a fitech. But after 5 mins on there super generic website with no tech info I decided to go elsewhere

[@REVNUMANEWBERN]

Think I have read THOUSANDS of comments on these FI setups especially this one, seems Fitech would have a UPFRONT chest sheet to check off AS you install, the top maybe 20 problems SOLVED in the sheet. Believe I'm going with the GM setup from howellefi that DOESN"T have or require the owner to input stuff

[@AngeloMandato]

Wish I read this last year and left feedback then, but I agree on the review except on hp, I give it a 7 of 10. I have had mine also since 2015, first 4 years with their fuel control center and this last year with in tank efi. The controller is it's downfall. All the parts that for into an fitech other than the injectors and the map sensor are off shelf Bosch, GM or VW late model parts. Power wise I did not see an overall jump, but I did have a quadrajet carburetor (most folks hate them) which worked really well on my Pontiac except for cold starts and the typical carburetor random issues like heat soak or float bowl stickyness. As for the temp sender, I never had an issue but I had one of the earlier units. I know in the 2017-2018 timeframe the sniper efi's also had temp sender issues, I suspect the company that made them in china put out a bad batch that effected everyone. Since I got a tanks in in-tank fuel pump I gained better throttle response. I always have a slight delay as compared to the carburetor but that made the biggest improvement so far. I think the fuel control center being powered by the fitech meant that there was a slight drop when you first hit the throttle for the fcc to adjust back to 58psi. With the in tank system it always provides 58psi regardless of how much fuel the fitech pulls. I am still reducing the pre start pump prime time, I have it set to 4 seconds and I think it's excessive. It may only need 1-2 seconds,you can hear the pump pressurize pretty quick.

[@tonicamaro8683]

I have never touched mine after set up ..

[@NashvilleEarlyBronco]

Thats awesome

[@mikedilts4346]

I have a71 cuda 440 6 pack changed out carbs installed go EFI tri power 600 hp problem gas pedal too stiff no

[@mikedilts4346]

Continue no easy into throttle just takes off anybody have this set up need help

[@vincentmayer8511]

Holley Sniper 2 reasons customer service is great and seems alot ot guys having problems with FiTech, but would like to hear your feedback on Edelbrock oh ya get some of those shirts in stock the one you got on please Thank you

[@botihi7971]

My Fitech went bad after about 1000 miles. Puking so much fuel the 454 wouldn't run. before that...it was great.

[@joshuafreeman9792]

I agree so far my issues have been 90% self inflicted only drivability issue was to much squirt at start up easily fixed.

[@thomastellup6523]

What intake did you use?

[@NashvilleEarlyBronco]

Edelbrock performer I believe

[@cbobscountrybunker2312]

I thought about buying one, but now im definitely not it sounds like a pain in the ass compared to a good working carb. I don't have vapor lock problems or any of the other problems with my edlebrock carb.

[@cheese8033]

when i first bought it and tried to start engine gas was pouring all over the place fuel injectors were not installed correctly called customer support and they said just take it apart and fix it yourself. ok i did a better job than they did and it worked 1yr later i had to change out the battery now the fuel pump wont run checked fuses no power out of throttle body you can jump fuel pump and engine will run like normal so crummy relay in throttle body has failed most likely will be told it fix it myself again

[@danstomber1664]

FiTech has at least one employee in their tech department that is downright rude and condescending. After waiting for 30+ minutes on the phone to talk to a tech the last thing you need is someone acting in that manner. Not to mention the fact that their warranty department is all but incompetent

[@martinrichter1596]

the tech department has to handle so many calls because of the shit they sell. know wonder they are rude.

[@REVNUMANEWBERN]

@@martinrichter1596 😂😂😂😂😂😂😂😂😂😈😈😈😈😈

[@the6thsenz955]

Who care what people say speak truth and if it hurts let it hurt.

[@chucknortis5418]

What about fuel economy

[@googleuser846]

I had the same fitech on a 350. Vortec heads. 9-10 mpg. Moved it to a 5.3 ls swap carb style intake. 13-14mpg. Stock styled or mpi would be better

[@roadgliderocketss8368]

Its all about the install, 99 percent of the time in my experience.. but yes, sometimes electronics shit da bed. lol😂

[@NashvilleEarlyBronco]

Exactly

[@pakwest]

#7. Customer Service/Support....

[@torstenland4294]

Why aren’t you at super celebration

[@NashvilleEarlyBronco]

I was, I make myself in two places at once 😂

[@herbsanderson482]

Waiting for your Super Celebration video?

[@staseghrrhgesats1946]

Unfortunately, and alot of times, the negativity is coming from absolute amateur installation and skill sets. Or just not a real good understanding of how the systems work. And that frustration is translated into negativity to the product.

[@zerostar2410]

Get over fitech already. We all know it sucks. We get it...

[@merlinmech2552]

Good review. Thank you! \