20 More French Cleat Ideas for Your Tool Storage #8

French Cleats are a great way to store many of your tools and hardware. It's even better than having a large tool box because of access and extra storage. So here are 20 More storage ideas that can inspire you in your workshop.
Please share this video with any family or friends who could benefit.
*
MORE Project Videos:
100+ French Cleat Ideas Playlist
• French Cleat Ideas for...
Making French Cleats WITHOUT a Table Saw
• 5+ Ways to Make French...
15 Things to Avoid with French Cleats
• 15 Things to Avoid wit...
Adding French Cleats to an Existing Shelf
• Adding French Cleats t...
French Cleats F.A.Q.
• French Cleats : Freque...
French Cleats FLAG Tool Storage
• French Cleat Tool Stor...
100+ Workshop Tips and Tricks Playlist
• Workshop Tips and Tricks
5 Simple Bow Sanders
• 5 Simple Bow Sanders |...
*
If you would like to help support our channel, please use our affiliate page on Amazon (paid link), were we have listed a bunch of tools we use and suggest.
Amazon Product Suggestions:
www.amazon.com/shop/influence...
(There is NO extra cost to you.)
*
Bessey Strap Clamp
amzn.to/2PQTFes
Spartan Mounts
Ryobi batteries: amzn.to/3mOJq6f
Ridgid drill: amzn.to/3dZgRyR
GRR-RIPPER 3D Pushblock
amzn.to/3tqKYGh
Dovetail Clamps
amzn.to/2RmvVPs
Shelf Pin Jig
amzn.to/2Qf71Ro
Featherboard
amzn.to/3daSzCQ
*
15% OFF Starbond Glue (Site-Wide)
Promo Code: SLC15
www.starbond.com/?rfsn=528922...
*
Your results may vary depending on type of materials, your craftsmanship, and tools at hand. We are not responsible for any damages or injuries that might occur. Use of video content for personal projects is at your own risk.
Some links in description are affiliate links that let you help support our channel at no extra cost to you.
Music from KZbin library.
#frenchcleats #workshop #tools
2 Timothy 2:20

[@stevehoefer3890]

I have completely redone my garage after seeing your videos. I have so much more room and organization than I ever thought I would ever have. Thank you for all your videos and keep up the good work. It's very inspiring.

[@SpecificLove7]

Thank you, Steven. Knowing that we can help people like you allows us to keep going and keep creating.

[@ecsoftball]

You are the MAN...The FRENCH CLEAT MAN!

[@mikec6111]

Some people binge tv shows. Me I’m binging this awesome series of French clean ideas. My garage is still a mess, but those days are numbered.

[@TheLightHouseLady]

The Flag looks Great.

[@davidrowe8747]

I love the infectious enthusiasm in these videos. I think you should have a French cleat challenge - see if viewers can come up with a tool you can't make a French cleat for (or that will be a real challenge to make)!

[@SpecificLove7]

I like the way you are thinking, and I might have to do that in the future.

[@terristroh3965]

I like the gripper/clamp holder as well as the feather board holder

[@raymitchell9736]

Oooh! Fastest click, ignore all other notifications, and watch another French Cleat ideas video from SLC!!! Great stuff as always. My favorite was the superglue organizer. For the Q Tips and other small cleaner tools/items I'd get some small clear plastic jars with lids and mount those on a similar cleat organizer. If they're square then they will compactly fit side by side.

[@SpecificLove7]

Thanks Ray! That is a good suggestion too. Now if I can just find some square clear plastic jars.

[@TheLightHouseLady]

LOL, the Bloopers are so good!!

[@SpecificLove7]

Thanks, I figured I might as well give you a good laugh since we had them recorded.

[@philgoulding5219]

Clinton , you continue to inspire me to make and adapt my older existing French cleats to ones like yours! The more I look the more ideas, with your help, I find in my shop to hang/display with cleats.Vertical spacing is a little tricky but one of the beauties of cleats is they can be moved. Keep up the great videos and thank you again!

[@baconburger9156]

Watched all 8 of these videos, they are great! So many inspirational ideas!

[@johnvodopija]

I really liked the glue holder. Good video. Cheers 👍😎🇦🇺

[@SpecificLove7]

Thank you very much

[@daveyjones8342]

Genius!

[@MichaelMickelsen]

Another great video. I like that you show your old design and then another better option.

[@SpecificLove7]

Thanks Michael. Im just letting everyone know I'm still learning too 😁

[@krisregensberg8063]

Really like number 8, they are so easy to misplace.

[@tomwilson5822]

Just love the show. You have inspired me

[@rjmills126]

The French cleat guru

[@SpecificLove7]

😁

[@LloydMayes]

Will be watching for the saw horse video

[@ddespault]

I just found your channel. I'm loving these French cleat videos! So many great ideas!

[@SpecificLove7]

Thanks

[@wandapiedra8973]

Excellent ideas.Thank you!❤️👍

[@TheLightHouseLady]

Another Great Video!!

[@ddhrsa]

Thanks!

[@sendmedics]

He’s also so creative and I really appreciate that. If I had one negative thing to say it is only that everything seems so…eccentric? I prefer a more cohesive feel to the overall vibe of my shop. Just my personal preference though. Still a great job.

[@91dfred]

Great ideas! I’m thinking I will incorporate some of those ideas in my shop (half of two-car garage).

[@SpecificLove7]

Thanks and Please do!

[@mhfirefighter1356]

Can’t wait for the next one!!! Awesome job, Thank you.

[@SpecificLove7]

Thanks Mark

[@crestonsimpson1370]

I think I would make the outdoor tools holders to be up and down instead of left to right. That would take up less wall space. In my garage this would work better for me.

[@SpecificLove7]

You have a good point

[@Bro_Miftah]

waaoow look nice, I love it

[@andrewbooth7352]

Personally I would never use any sort of blower to shift sawdust as it would fill the air with fine particles. I developed asthma due to breathing in wood fibres in my old job so would always use a vacuum or dust collection system. I love the enthusiasm you have, if you could bottle it you'd make a fortune! 😉

[@lawrencelunsford6028]

Hey, I just saw your Georgia license plate in the video. We have a nephew that lives in Douglas, you guys could be twins (or at least close relatives! :)). Every time I'm watching one of your videos and my wife comes in the room she asks: "what's Isaiah building today?" Enjoy your content, thanks for the videos! :)

[@SpecificLove7]

That's funny! We live in north west GA, so unfortunately we are not neighbors.

[@timtully8015]

Great Video, as always, Clinton! Thank you. Can you tell me please where to get one of those LED Light strips, and what they're actually called? And is the one you have powered by battery or AC? Keep up the terrific work!

[@H3110NU]

The q tip holder can be improved by angling the bottom of it and leaving The plexiglass not all the way to the bottom, kinda like the old school straw dispensers in fast food joints.

[@SpecificLove7]

Good thinking!

[@ericeinsmann5559]

I got a little tip for you! (maybe) When you make a cleat or holder, save the little 45 degree cut off piece and use that as a bumper to help hold things in place or to keep small items from falling off a shelf..

[@SpecificLove7]

That is definitely a good idea and I will have to try it.

[@garvielloken3929]

nooice!

[@AGlimpseInside]

First...😄 Sorry buddy I had to. I’m watching now

[@danbelzile4203]

Good tips as allways. 👍. Allso what size of drill bit for golf tee key holder? 🇨🇦☕

[@SpecificLove7]

I honestly cannot remember. I just picked one that was the same size side by side.

[@mkplante]

Love my Sawstop, but the stock mitre gauge has lousy accuracy, even apart from the short reference surface. After watching a review of a bunch of aftermatket mitre gauges (TWW), I'm wondering if you would consider a holder for something like the Incra 1000HD. Been using it for a year and it lives up to expectations. Either way, appreciate all the ideas!

[@SpecificLove7]

Maybe in the future

[@paulzinerco7036]

Hi, thank You for sharing your videos they’re very educational for me because I’m new to woodworking and I do enjoy it, What I wanted to know is can I use a 1x4 and cut it in half to make those French cleats?? Or is too narrow?? Plywood is kind of expensive at this time and was just wondering if there was a chipper way of making them. Please advise. Thanking you in advance. PAUL

[@SpecificLove7]

A pine 1x4 may be a little small to rip in half for the wall cleats. But for the back of the tool holders, it should work.

[@paulzinerco7036]

@@SpecificLove7 Thank you 🙏 for the fast response, can I use two of them one for the wall and the other for the tool holder?? Thank You Again 🙏👍

[@pocnad4762]

Can you please do a video making a horizontal Murphy twin bed without expensive hardware with a full tutorial and material list and cut list

[@SpecificLove7]

Maybe in the future but not anytime soon

[@kubdude]

Great video - Love your bloopers. I see what you did... you spelled bloopers wrong-----boopers :-)

[@SpecificLove7]

Sometimes I might have some extra stuff in the videos, and you caught this one, Good Job!

[@bluesbob5611]

Do you like your band saw

[@AGlimpseInside]

Now you used to Cnc to make all of this correct? Haha

[@SpecificLove7]

I'm sure some of the viewers might think that, but nope 😁

[@renanfigueiredo62]

He just needed to put his car with his helping hand on the wall kkkk

[@patrickellis3205]

So we’re at 160 ideas, will number 200 be something a bit extra special?

[@SpecificLove7]

Maybe 😁

[@markbaker5167]

Lots of great ideas after watching a lot of your videos but I wish you'd reduce the number of times you say "simple." Must average saying it 40 times an episode.

[@SpecificLove7]

LOL, you are probably right. I sometimes repeat too much.

[@kuehnel16]

Well ain't you clever. See what owning a 5000 dollar table saw will do to yah.