$200 Blaster Rebuild | Budget Blaster Rebuild

Tires: amzn.to/3vEgjHk
Reeds: amzn.to/3E9cf4Q
Bolt kit: amzn.to/3CaZNAR
Head Stud Kit: www.ebay.com/i...
Top End Kit: www.ebay.com/i...
#Blaster #yamaha #2stroke
Shop: www.timemachin...
Insta: @timemachinesatvs
FB Group: / 253442778458579
Send us your videos and non weird mullet sh*t: [e-mail]
Send us your love letters to:
TimeMachines
P.O.Box 210
Rhome, TX. 76078

[@Sharky_Mcstevens]

Prices on these finally coming back down to earth. Sold all my toys during the price hike. Now it's time to buy again.

[@TimeMachinesATVs]

Haha yessir

[@billyb7561]

@@TimeMachinesATVs Next time use automotive plastic/urethane bumper cover stripper. Less agessive and is meant for what you were doing. "SEM" is one brand that sells an aerosol version.

[@yaboysamshep1470]

That’s why you want to have friends like that , good friends , he has stuff all over the yard , he’s fully committed on this one 😂😂😂😂😂 I laughed so hard

[@TimeMachinesATVs]

Lol not sure where the part went but i said he will get it done. Thats all that matters rain or shine etc. those r the typa friends ya want

[@Hanky_Bannist8r]

You just taught countless folks how to get up in there. I'm so excited for the 350x !!!

[@TimeMachinesATVs]

Haha appreciate ya hanky comin soon!

[@Davido50]

Rad dude. Save Sport Quads!

[@Jonny2Fingers]

Man that is genius having oil in a soap dispenser. Blew my mind! 21k coming in hot. Amazing video packed with info and good laughs! And I can’t wait for the 350EX build!

[@TimeMachinesATVs]

Coming soon jonny! I usually like a condiment bottle better but then the oil get contaminated after a while. Dollar general 1$ oil dispenser lol

[@FarmerBrown420]

You from.nc

[@danjim7056]

I've done so much work on cars crawling around in the muddy snow working out of a little shed. I'm greatful I have a garage now and switched cars for bikes and quads.

[@TimeMachinesATVs]

Same here !!

[@DABEAST691]

25:00 he was spot-on on not using that wrist pin bearing. Those only last about 20 hours before they end up heading out the exhaust. Get a reputable name brand needle bearing from all balls or wiesco if you need a new one

[@TimeMachinesATVs]

Yessir.

[@caryorban8322]

Hell ya David! I'm sure the neighbors are luvin ya!! That's a true mechanic rite therrr!! Turned his front yard into his shop just to get his truck done!! Great job on the rebuild of this master blaster!! Ya always do great work bro

[@TimeMachinesATVs]

Haha no excuses!

[@fabiogalindo8982]

Awesome video. I have that exact same blaster, I believe a 2004. On mine my piston skirt broke in a lot of pieces breaking a piece of my crankcase off. I got I welded and bought a new OEM piston. I’m excited to get my blaster up and running. All I’m waiting for is a oil seal.

[@dylanh4657]

Hey, I was the one that commented about memories of my LT80 on the last video. If you get a REALLY clean used LT80 of any year (Preferably a yellow with blue seat one, like my 88 as a kid) post if on the tubes, so I can see. I will most definitely buy it, and either drive the 1000 miles to get it with my son, or have it shipped. He just turned 8 and I'd love to get him into the hobby, I was around the same age when I got my brand new 94 PW80 and 1988 LT80.

[@TimeMachinesATVs]

I will do. Theres a few lt80 videos on channel as well!

[@TravisJones1979]

gave this a full watch start to finish.. loved it!!!!!!

[@TimeMachinesATVs]

Appreciate ya travis ! Might post another today

[@dionhorn5624]

Ebay all the way. You and your boy doing a great job. Blaster was black and now white...what... Like that 1 wheel wheelie. Good job guys

[@TimeMachinesATVs]

Appreciate it dion. Had to get rid of that spray paint job

[@eddiesheeran5791]

Thanks for all the tech tips! Great video!

[@TimeMachinesATVs]

Hell yeah more to come

[@sharonjordan3574]

​TimeMachines where should I get a top end rebuild kit

[@Fr331995]

Thats the most well packaged rebuild kit ive seen lol😅

[@TimeMachinesATVs]

Appreciate ya, I agree!

[@michaelshiflett3391]

I love how you did those tires! Lol Blasters are awesome machines.

[@TimeMachinesATVs]

Best way i aint fkin around for 2 hrs tryna change these. Support local business lmao

[@kevinlepage123]

Was on a blaster this weekend with a big bore kit and I really enjoyed it .nice find that should sell fast take care guys

[@TimeMachinesATVs]

They are my favorite kevin! Appreciate ya bro

[@ricardoguerra9411]

Awesome Mechanic Wisdom shared...Also your buddy had that whole engine apart on the driveway..That takes some muy grande cahones.

[@TimeMachinesATVs]

Yeah no shit. He was 100% committed it was back together that evening. And now sounds/runs excellent. Compared to before

[@Blockhead_teda]

Just got a nine running blaster for a Chinese pitbike , confident I can get it running

[@TimeMachinesATVs]

Nice trade!

[@jasonkoz8985]

A piece of advice if people don't know is to make sure you have the correct sparkplug in. I had the wrong one in apparently and blew a hole in the piston.

[@TimeMachinesATVs]

Always! Too long = piston kisses

[@rowdysworld22]

I just got the same blaster, 2004 white with red frame. It’s a beast just won’t idle at all, going to try to drill a new idle screw because previous owner removed the Tors.

[@gavindonald1874]

Enjoy watching your videos man I learn something everytime I watch your channel

[@TimeMachinesATVs]

Thanks gavin!! Lots more to come.

[@stephengalvan7722]

I wish I could find one for $200 bad ass can't wait for more blaster videos

[@TimeMachinesATVs]

we got blaster videos for days, and more to come. thanks for watching Stephen!

[@stephengalvan7722]

@@TimeMachinesATVs your shop is bad ass can't wait to leave California

[@craigsmith9156]

sweet 1000 times better thats a nice bike

[@TimeMachinesATVs]

Thanks craig!

[@Topflight44]

Fully committed on that truck job 😂😂😂

[@TimeMachinesATVs]

Lmao yeah he was

[@max_murphy2511]

Got my first 2 stroke, all original 89 quadracer 250. It’s be cool to see one on the channel eventually 😎!

[@burnheretic3950]

He has had some on the channel, search thru his old videos.

[@TimeMachinesATVs]

Have a few on channel ! Nice white 89 made video of a while back

[@riazamjad9276]

Get up in there dude!!

[@TimeMachinesATVs]

Yessir

[@bobbymckinney1264]

Nice blaster,she runs good now after getting up in there,love the channel!!

[@TimeMachinesATVs]

Thanks bobby! Blasters are my favorite

[@Brianlsvtec]

I need to pick up another blaster! Such a fun little machine

[@TimeMachinesATVs]

They are a lot of fun!

[@DhRiffs]

Blaster blaster videos please, love you guys´s videos here in Costa Rica Get up in there!!

[@TimeMachinesATVs]

More coming!

[@thelakecommander7632]

Nice rebuild video. Digging that new hair do as well!

[@TimeMachinesATVs]

Haha beards gettin trimmed next

[@THEDUKELOVER]

gotta love the simple old two stroke 💙💪

[@TimeMachinesATVs]

Sure do

[@THEDUKELOVER]

@@TimeMachinesATVs dam right! check my page thats all i WANT nice build keep up the good work bro you have awesome channel

[@Mongoloidmyke]

I always learn something, and enjoy watching. Thanks man you are killing it!

[@TimeMachinesATVs]

Thanks 187!! Lots more coming

[@dylandunne1165]

Those motion pro torque adapters are awesome. Wish I had got mine years ago

[@TimeMachinesATVs]

Yeah they’re necessary for sure

[@bradmorton4254]

Hey guys thanks for the content. I enjoy watching all your videos but this one helped me tremendously because i have a 95 blaster and the top end just went out I ordered the wiseco rebuild kit. I hope that's a good one because I have no idea what the hell I'm doing. Thanks guys keep it up

[@JuanGarcia-oz6sg]

Have you rebuilt it ?

[@chillycheeze2207]

"Thats a nice crank, smoke it david"🤣🤣

[@TimeMachinesATVs]

Lmfao

[@coyotekelly7143]

You have to have the torque adapter at a 90 degree angle to achieve proper torque, or use the head length chart to compensate if using it straight on

[@savagelif3302]

I just got a 01 blaster free I'm watching you fellas to rebuild her and have it screaming once again she striped down and ready for paint now

[@russellglover1920]

I think you are supposed to have the tool at 90 degrees for the torque wrench to be accurate. Thats how it is for the AR barrel nut anyway. Great vid!

[@TimeMachinesATVs]

If they are plus minus 2-4 lbs but even that works fer me lmao

[@julianr1742]

With that torque wrench adapter you have to do a calculation. Just setting the torque wrench to the torque spec does not make it correct, with the extra length of the wrench gives more torque and thus that was more than 20 ft pounds.

[@TimeMachinesATVs]

At least theyre all even

[@andyarends4090]

Great work! Fun little quads…

[@TimeMachinesATVs]

Yeah they are

[@craigkennedy1684]

Always wanted a blaster when I was younger but my dad hated two strokes. Now I’m Looking for one for my boy. Prices seem to still be jacked found one that looks like a complete turd with spaghetti wiring hanging off it and add says it needs a top end for $600. At $200 this would be a no brained to pick up. Good find and good video my dude.

[@jadonanderson8080]

I really like the blasters they really awesome

[@TimeMachinesATVs]

My favs

[@Skubadav69]

Yeah I bought one of those reed boots said it was for a blaster but didn’t come plugged off but I bought one of those tach out performance heads that’s a 20cc dome I like it

[@TimeMachinesATVs]

Also turns carb slightly away from airboot but it worked some how

[@Davido50]

Keep it Yamaha 💯 boys! 😀 Got me a legendary '11 YFZ450X Bill Ballance (I'm orig owner..quad has only 4hrs on it! It's now fully prepped to race locally). Picked up a '21 Raptor 700R-SE in June. My dream machine. Worried Yamaha may discontinue soon as I've heard rumors. *Btw, both the YFZ450R & Raptor 700R are selling like hot cakes even @ $10k* . - NW Ohio

[@TimeMachinesATVs]

Love my yammer hammers

[@treygrebner2810]

Get up in there buddy! Love the vids can’t wait for the X!

[@TimeMachinesATVs]

Coming very soon!

[@ericsilverware4561]

Best video thus far great work time machines best atv content on the interwebs! 🔥

[@TimeMachinesATVs]

Thanks flower power!! Lots more coming

[@mxbeanz1206]

The best atv channel there is!

[@TimeMachinesATVs]

Appreciate ya dean!

[@Geeker.]

Finally the vid I’ve been waiting for

[@TimeMachinesATVs]

Heck yeah appreciate ya logan. Lots more to come.

[@robert-hr3el]

Just bought one just like this Thanks bro

[@TimeMachinesATVs]

You bet robert

[@tommyjefferson9525]

You guys are great love the Channel you do great work so keep on keeping on

[@TimeMachinesATVs]

Appreciate it tommy !

[@shaynedonnelly374]

Chea dudes. Rebuild knowledge is key when you're hard on the gear. These are the China kits you got that you returned from the video wear buddy forgot to wear both shoes lmao

[@TimeMachinesATVs]

Lmao. The send backs were

[@hb91]

Best shit on KZbin to watch thanks for knowledge brother Jarod your very good at explaining how to tear bikes down n short cuts .Can't wait to see you at 50 k on here it's coming in time I'm share your videos

[@nolove332245]

Yea ive used a few ebay kits before not bad for the money. Screw amazon lol never use em. Great video bro like always! Stay up in there and be safe

[@TimeMachinesATVs]

Appreciate it matt. More coming this week

[@coltonmick8610]

when i get a blown up quad i put the quad up on the grab bar and power wash the crank out then soak the crank in two stroke.

[@TimeMachinesATVs]

Gotcha

[@freddymartinez4822]

@timemachines I got a 2002 I'm looking into restoring everything, your videos are definitely the inspiration

[@dylandunne1165]

Up in my neck of the woods. I live about 15 minutes from Decatur Tire

[@TimeMachinesATVs]

Haha same here

[@sbalestro]

Sweet video, I always learn something from you, appreciate it!

[@TimeMachinesATVs]

Thanks shawn

[@Kindaquick1]

" if you get real close you might get to take a nap " Hahahahahahaha!

[@TimeMachinesATVs]

Lmao

[@tomlenza2768]

Awesome video! Good information as always. Get in there boys!

[@TimeMachinesATVs]

Appreciate it tom

[@markeithpeacock222]

Nice blaster up in there

[@TimeMachinesATVs]

Thanks markeith

[@Brianlsvtec]

Get up in there 🤙🖖

[@TimeMachinesATVs]

Yessir

[@JackSmithjr]

Blasters are fun

[@TimeMachinesATVs]

Yeah they are

[@Brianlsvtec]

"Don't eat this and don't smoke the glue" 😂😂

[@TimeMachinesATVs]

Lmao do not do that. Kawasaki guys do that stuff

[@858415]

Loving the channel guys🤟

[@TimeMachinesATVs]

Thanks matt!

[@cletusbowling923]

Thanks for the video. You taught me alot here on this video

[@Me23-e4u]

I just got a 2002 blaster so if I take off the Air box Lid that will help it run better

[@TimeMachinesATVs]

not always, thanks for watching hash!

[@Me23-e4u]

@@TimeMachinesATVs So is it better just to keep the lid on

[@murph2521]

Getting up in there son! Love the rebuild how to s brother

[@TimeMachinesATVs]

Lots more coming murph

[@murph2521]

@@TimeMachinesATVs awesome man I'm always watching and yall have my support

[@randygreenoe7892]

Parts in the link u gave us really jumped in price..$950 for the top end..

[@TimeMachinesATVs]

Thanks for the heads up

[@markbarton4344]

Damm right she's done! Sucks you had to go through that though. Now you know and knowing is half the battle, GI joe!

[@TimeMachinesATVs]

Lmao for sure it is!!

[@CO-LOBEATS]

Awesome dope video my guy !!

[@TimeMachinesATVs]

Thanks colo!

[@killianlastname1108]

I'm almost 5k into trying to fix mine. After all that money and found out a few weeks ago, the crank case is cracked and that's been my issue. Only got one to ride with my dad on his blaster. I could've bought 3 blasters with the money I put into mine. Such a mistake.

[@TimeMachinesATVs]

Man that sucks. Leakdown test may have helped. Usually will show ya where case is leaking. Important tool for blaster trouble shooting

[@eddiepad5387]

I got a rebuilt blaster not too expensive but it runs good the only thing it takes alot of kicks to start, besides that it runs and sounds good

[@eddiepad5387]

What could it be?

[@505fastlife6]

You need to do a leak down and compression test. South Texas banshee sells leak down testers on eBay.

[@TimeMachinesATVs]

Yessir. Leakdown test. It’s likely an air leak

[@theOneandOnlyhomieG]

@@505fastlife6 STB is by far the most impressive vendor in this community and I am so glad I found him. Didn't know he did the leak tests, so I am gonna send him a text and get fixed up for one since they're nice to have.

[@thomashouts4429]

Homie got his ears tucked Clean

[@TimeMachinesATVs]

Lmao

[@TravisJones1979]

lol thats some nice crank lol !!!!!

[@TimeMachinesATVs]

Lmao

[@Rick-kg1qn]

I'm about to do the same thing to my blaster

[@SpAcEcruizer203]

Get ALL uP ALL thE Way iN THeRE !!!!Repeat this ProceSS!!!!!

[@TimeMachinesATVs]

Yessir. Dont quit till she says youre done

[@SpAcEcruizer203]

@@TimeMachinesATVs thanks man

[@dwalker2431]

get up in there skunky funky

[@TimeMachinesATVs]

Haha u know it dwalker

[@Angel-nt2ob]

I have a Yamaha blaster200 2002 and it won’t stay on in Neutral it starts first kick but just won’t stay on any suggestions please and thank you ?

[@TimeMachinesATVs]

Adjust the idle?

[@Angel-nt2ob]

@@TimeMachinesATVs I’m gonna try that thank you

[@topher4050]

you're over torquing those bolts. if you're using the motion pro adapter thing it needs to be at a 90 degree angle to the wrench. if its straight out like at 29:45 you're adding leverage and throwing off torque specs. just so you know

[@craigsmith9156]

cant wait for the 350x

[@TimeMachinesATVs]

Coming soon! Gonna be 2 parts i guess

[@kylelangworthy9641]

I definitely agree don't use bearings that sound like a maraca LOL

[@TimeMachinesATVs]

Lmfao for sure

[@fernnandogonzales5893]

We just got one for my check. How do I mix the gas on it like what gas cans should I get to mix the two stroke?

[@roynelson7613]

Hell yeah you guys awesome rebuild after the China malfunction that's aggravating big thumbs up y'all👍🏽👍🏽👍🏽👍🏽👍🏽

[@TimeMachinesATVs]

Haha appreciate ya roy. Lots more coming

[@IHateWinchester17]

Nice I have an 06 blaster

[@TimeMachinesATVs]

Never sell it

[@alechharper2681]

So did you turn it upside down to get broken pieces out? Part of my piston broke off and I haven’t found it up too you think if I turn it upside down and do the same it may fall out? It still a good crank I’d hate to break it open to just get that piece

[@mauros.3996]

what is the approximate cost of a 1995 yamaha blaster in the united states?

[@TimeMachinesATVs]

It varies. Between 800-2500$

[@alltorque415]

Hows it going! On my blaster it been sitting for almost a year. cleaned the carb and for some reason the gas dont go through the carb. the bowl is dry but gas comes out the tank?

[@yaboysamshep1470]

Love it !!!

[@TimeMachinesATVs]

Appreciate it sam

[@danjim7056]

Lol at the tire change tutorial.

[@TimeMachinesATVs]

Works everytime

[@TravisJones1979]

love blasters

[@TimeMachinesATVs]

Same here my favs

[@rondomvideohd]

How to buy Yamaha blaster second sparepart on your garage? I want to buy completely cylinder of Yamaha blaster

[@lexomotorsports]

Yeah buddy

[@TimeMachinesATVs]

More coming audi

[@brianj123458]

Honda oil in the Yamaha im surprised the poor blaster did not vomit lol 😆 😅 😂 just kidding love your videos have great day

[@TimeMachinesATVs]

Lmao itll live

[@brianj123458]

@@TimeMachinesATVs LOL 😆 😂 🤣

[@jimbo4203]

Of course you had to use blaster on the blaster !

[@TimeMachinesATVs]

Lol

[@billyaddelia4330]

I had the same thing happen with mine the piston was to big for the cylinder just like that the Chinese top end kits suck.

[@TimeMachinesATVs]

Yeah that sucks

[@creek_made]

I like your shop, bud -is that closed cell insulation blown in there? How thick did you go? Good vid.

[@TimeMachinesATVs]

1.5”

[@holmmie4433]

Schaawiiinnnngggg!!!

[@TimeMachinesATVs]

Yessir

[@PearlyS10]

Hey you guys are good with 2 strokes, I need some help

[@sarahsmith1575]

Wasn't it easier just to take the engine out of the four-wheeler instead of flipping an upside-down this happened to my Yamaha Blaster we just removed the engine

[@TimeMachinesATVs]

Did it take you 30 seconds to take the engine out? Flipping the quad over is about as easy as it gets for me

[@Haze-derr]

So how did u break it in on the heat cycles

[@canyougetthat507]

Where are you located? I’ve got a raptor 700, only sparks

[@TimeMachinesATVs]

Ft worth texas

[@billyb7561]

Next time use automotive plastic/urethane bumper cover stripper. Less agessive and is meant for what you were doing. "SEM" is one brand that sells an aerosol version.