200 HP Increase On 8PSI & 91 Octane

Don't forget to subscribe to stay up to date on our weekly videos, events, and track days!
For specific questions regarding installs, packages or dyno tuning send us an email at [e-mail]
www.raceprovenmotorsports.net
Merch - raceprovenmotorsports.net/col...
Instagram @raceprovenmotorsports
Tiktok @raceprovenmotorsports
Collaboration/Sponsorship/Marketing/Questions - [e-mail]

[@ryanbrown918]

Garret you have by far exceeded anyone else in that position. Well done man. You're definitely fitting in with the crew.

[@kendrickh91]

Nice!! This just gave me an idea for my SS.

[@weselmendorf2195]

kyle was in a kinda rare form mood

[@bradgrabiak6792]

Great video for the SS guys!

[@CamaroThings]

I have my own bias between BD and WM. Honestly though what Kyle said about fusing both kits together would make for a perfect kit. I did like though that the WM kit everything (pulleys and such) fit and the instructions were very clear. I had the blower already, the pin kit for the ATi and a Rotofab.

[@jplperformance9073]

Awesome video

[@nurburgringdreaming2221]

So is there still a problem with hot spots on ls and LSA heads on #7&8

[@chrisiztheman1618]

How much further could you have advanced the timing had he ran 93?

[@joshjammer5716]

Can you do auto up shift on gm trucks?

[@boostedz0683]

Mn is minnesota, mt montana, me maine buddy!

[@ericsanchez7566]

How did you get around the low fuel pressure. That can't be good long term. Did you have to reprogram the FSCM?

[@Fusionawdecoboost2016]

Ya in Maine it’s very rare to find 93 octane gas. There are only a couple gas stations that have it. Now that I live in NH 93 is at every pump.

[@newtonfirefly3584]

Since this has a "fuel kit", which should be a "flex fuel" kit, sensor, then using pump E-85 [40-55% E] or better, proper E-85, -88, -90, -95, -100, will achieve much more power, cleaner burning, with exceeding less carbon deposits ->Boosted engines do NO require higher octane fuel which is necessary for high compression engines to slow the burning rate even - do NO provide more power -> pump E-85 achieves 40-50 + HP over 91 or 93 or C-16 -> proper E-85 achieves 100 + HP over any pump 91, 93, C-10,-16 fuel. Most people are just ignorant with false, faulty information about fuel within combustion, power. Sincerely

[@michaelnguyen9700]

What do you guys recommend for spark plug wires for LSA!

[@notbuyingit8047]

OEM!

[@chrislamarche7305]

What would be a good supercharger kit for a 07 trailblazer SS

[@TexasGTO]

Find a used LSA and piece the rest of the kit together yourself. It isn't hard and it's very cheap. You'll need the adapter plate for your cathedral heads or you can buy used ls3 heads for cheap. Everything will literally bolt right in. It's stupid easy. Obviously any power mods you want will increase price (ie ported heads, cam) but if all you do is add the blower and leave everything else stock you'll still be 500+ whp easily.

[@alexiegomez1691]

18:41 with the noise😂😂😂

[@alexiegomez1691]

I think i found my new best friend, Cold beer

[@9090ruby]

So after all said and done with these Lsa kits you should just get a procharger or maggy😂

[@TexasGTO]

With price creep lately, it's becoming a better option to just pay a little more and get maggy/pro. Before when these blowers could be bought for $300-$500 bucks and piece everything together yourself, you could add a ton of power for not much money. A couple of companies then went ahead and bought every LSA they could, which ballooned the price of them. So now a used LSA can't be found for less than $1200 and it's becoming less viable. But the only trade is these blowers are designed and built to be daily driven, so repair and maintenance is almost non existent. I bought my kit years ago before everything went crazy and I still feel it was a good option for me at the time. Total kit for me was less than $4k, which maggy/pro were both $4k more. Also, the owner of BD was extremely helpful during install which you'll never, ever get that from maggy/pro.

[@HennyTRX3773]

Is there a huge difference between a 91&93 tune. And who remembers sunoco ultra 94

[@Jsmith9619]

I remember that

[@RaceProvenMotorsports]

Yes. Big difference honestly.

[@kolbyhumbert2680]

@@RaceProvenMotorsports how much more do you think this setup would have made on 93? 580?

[@newtonfirefly3584]

@@RaceProvenMotorsports Sure for high compression engines, the higher octane is necessary to slow the burning Sunoco had a dial on their pumps to select the octane, via adding more tetraethyl lead, back in the 1960's to early 1970's, before the fuel requirements changed along with lower compression engines. Fran, Matt, Eric, Kyle, Garrett, Bill should all become more knowledgeable with, about ethanol -> cleaner burning, more power and lacking, needing higher octane fuel with boosted engines. -> pump E-85 [40-55%] achieves 40-50 + HP over any pump unleaded 87-91, C-10, -16 -> true E-85 achieves 100 + HP You can show this via Your dynometer measurements with any vehicle, engine, build There are differences with ethanol + methanol, ethanol or methanol alone, though small. NASCAR use proper E-85, C-85, Indycar switched from methanol, M1 to ethanol in 2007, Top Alcohol mostly use either methanol, ethanol, Top Fuel use nitro-methane = nitrous + methanol. Sincerely

[@newtonfirefly3584]

@@kolbyhumbert2680Kolby Humbert, clearly Your have False concepts about hydrocarbon fuels -> no power increase -> perhaps less -> higher octane = slower burning -> for high compression engines, not boosted much better with ethanol, even pump E-85 [40-55%] => 40-50 HP increase -> proper E-85C-85 = 100 HP + also over C-10, -16 methanol & ethanol, ethanol or methanol alone have some smaller variation of power between them methanol burns cleaner than ethanol since it has less carbon; methanol CH4O=CH3-OH - 4H/1C; ethanol C2H6O=CH3-CH2-OH - 6H/2C=3H/1C. Sincerely

[@John-qz4cv]

Dang she's looking good! Lost alot of weight.

[@TBagr]

Notification squad!

[@Epsonblade]

So what you're saying is there isn't ONE kit for an LSA that includes EVERYTHING you would need to do this in your driveway...?

[@kotajensen6436]

I agree Boostdistrict sucks balls.

[@bigdvids2720]

Gotta love some trans action😂

[@fc7424]

Should have put a Harrop 2650 supercharger and OTR on it.

[@nurburgringdreaming2221]

I should’ve bought the gauge set for my Z/28 before GM discontinued it. Snooze you loose The Z/28 has the worst oil gauge I’ve ever seen.

[@CamaroThings]

Some of these comments asking technical crap for cars that aren't in the shop, won't be in their shop or aren't even in the commentor's possession... really starting to piss me off! Call the shop or delete your keyboard! The choice is yours.

[@nurburgringdreaming2221]

I can hear Eric now “ I was say 378 but I changed my mind “. Lol Still love you Eric even tho your an butt head sometimes.

[@brianmorris9584]

Poop district

[@TexasGTO]

Sick burn yo

[@jesusnegrete3751]

No cam🤮

[@jameslong9564]

More people who can’t pronounce Missouri correctly.

[@danieljadorie829]

I never understood how some folks from Missouri say Missoura. At least on the Kansas City side I've heard it.