2001 Ford F150 Intake System Service - Amsoil Power Foam

[@Kk-yt8bl]

I used 2 cans on my 2000 f150. 4.6 yesterday. Took about 25 minutes start to finish. I have driven about 75 miles since. I absolutely have a much better throttle response. The idle is staying solid about 700, it has not idled steady in years.

[@InsaneOil]

I was sold after using it on my first vehicle. The Power Foam is pretty amazing stuff. www.amsoil.com/shop/by-product/other-products/cleaners-and-protectants/power-foam/?zo=10458

[@GatesRapes]

@GR Use CRC, I have multiple times with great results

[@dfls5069]

@@InsaneOil what happens if this procedure is done on a cold engine? if it doesn't reach operating temperature the cleaning process is hindered?

[@InsaneOil]

@@dfls5069 Per the manufacturer specifications, you will want you engine running at normal operating temperature. amsoilcontent.com/ams/lit/databulletins/g2799.pdf?zo=10458

[@justincase7661]

Excellent diagnostic and supreme EZPZ instructions!! Thanx

[@InsaneOil]

Thank you for the comment. Good luck with your service.

[@ironDsteele]

This stuff does work very well. I would like to mention though, that if you do not have a high mileage vehicle ( I do ) it should be used at regular intervals early on to prevent the buildup of contaminants and keep your engine clean, rather than waiting to remove 100,000miles worth of it.

[@parknelson3428]

Universal Steele What intervals?

[@wollybenson6726]

I use carb cleaner works good and that engine light he had on is easy to shut off. Just disconnect the battery for few minutes then reconnect that engine light should be gone

[@Concretefarm]

I live in Canada and you can't ship it here but you can drive it a cross the border. I just got 3 cans today...

[@kimbalrichmond7946]

Excellent excellent video! You went over and above on this one brother.

[@InsaneOil]

Thank you for the comment. Good luck with your vehicle service.

[@mactownsend2890]

Very well done and explained. Thank you sooo much. I will give it a try. I have the same year/model with 164,000+ miles.

[@grillsandaxlegrease3578]

You also want to make sure the engine is well up to operating temperature before you start and when you blow it out on the highway!! Red hot moderate RPM (lower gear) aids in burnoff of carbon.

[@jakethompson8991]

Can you do this with air throttle body and air intake cleaner

[@mayopierre8137]

hello I have a Ford F 150 year 2002 V6, the problem is that each time the vehicle stat he has trouble of returning when we raise the candles they always have wet Aid month if you're struggling

[@InsaneOil]

I don't understand your question.

[@samualiam9981]

Couldn't you disconnect the battery beforehand to keep the check engine light from coming on?

[@alfredosantiago698]

My intake manifold have oil inside. This will clean the oil?.

[@InsaneOil]

Alfredo Santiago Yes, it will

[@alfredosantiago698]

@@InsaneOil thanks for you reply. But I think is not normal to have oil inside the intake manifold. Right?. What you suggest to fix to don't happen this again?.

[@sloanemcgarrah1317]

Do an oil and oil filter change. Your oil is blowing by your rings and coming into the intake. This could be because of old oil, old oil filter, or worn out rings. I'd hope it's old oil.

[@angelisone]

Would the dirt & junk passing out first goes to the Catalytic and clog/damage Catalytic before even passing out from the muffler?

[@aubreyeakins4715]

angelisone d f.

[@nuclearbum9858]

What is the cable next to the throttle cable called mine is broken

[@InsaneOil]

Are you referring to the cruise control cable? Start this video ( kzbin.info/www/bejne/jZC4oXqtidClbJY ) at the 7:10 mark and see if it helps.

[@nuclearbum9858]

thanks@@InsaneOil

[@auburnsks]

Thanks so much. I have a F150 2004 170,000 miles. 3 time in a month it would not start. I went on line and saw where I could pour a little gas in the rubber line off the brake buster, I did and it started, Any Ideal to what I should do know. Thanks so much for your help. Tommy H. Mobile Alabama

[@sggdopeyz5346]

hey I have the same engine 2000 expedition it has about 195k miles. it's been idling roughly/surging at red lights and in park. do you think this could help?

[@ericgrau123]

Sounds like a gummed up idle control valve to me. Very easy fix and common.

[@sggdopeyz5346]

***** ericgrau123​ cleaned out the idle control valve and throttle body. Runs much better now, thanks guys.

[@romansroad2007]

Is that what you did for your Expedition?

[@philipregenold287]

Why disconnect the sencors to spray in intake?

[@zachmiller289]

Philip Regenold I realize this is an old comment but sometimes you have to disconnect the sensors or the vehicle won't even stay running. Especially when you have a Mass Air Flow sensor. The ECU will think there is no air entering the engine and will overly lean out the fuel mixture until it won't even run. Hopefully this helps.

[@pedroperez2996]

Hello I removed the throttle body and on the inside it was grimey and oily. What does this mean? Is it supposed to be clean or dry?

[@InsaneOil]

The throttle body will get gummed up. Amsoil Power Foam is designed to clean off the gumminess. www.amsoil.com/p/power-foam-apf/?zo=10458

[@chrisreyes-ts7yp]

What else can i use? Here in LA they dont have that specific brand. But one hell of a video you put up there for us. Great Job!

[@InsaneOil]

Another well known brand is Sea Foam.

[@Stantonv]

O2 sensor? I think you are referring to the intake air temp sensor.

[@InsaneOil]

Air Intake Sensor would be correct. An error on my part.

[@jesusvaldez2964]

what's the difference between power foam and sea foam??

[@michaelreid4302]

The AMSOIL brand I trust way more..

[@michaelreid4302]

It's like McDonald's 1$ burger and a steakhouse burger. Ones really not a burger it's just got a disguise

[@damienmendez5269]

Would it be good for a 02 explorer and 98 expedition?

[@InsaneOil]

Yes. It would be good for any vehicle that has a lot of miles and hasn't been cleaned before. www.amsoil.com/p/power-foam--apf/?zo=10458

[@choadcityusa]

Does it clean out iac and egr too?

[@InsaneOil]

Specs can be found at www.amsoil.com/p/power-foam-apf/?zo=10458

[@KanoValentine]

3:40 for throttle body cleaning

[@jameskarl8908]

Most cars won't start with the MAF sensor disconnected.

[@elgi6635]

? Did you say " Oxygen Sensor" instead the air temperature sensor? At the begining

[@InsaneOil]

Yes, I did say Oxygen Sensor, it was an error. You are correct that it is the Air Intake Temperature Sensor.

[@TheReeper602]

Awesome brotha I'm going to try it...one questions though is it going to hurt that cats at all from all the junk flowing though them

[@TheReeper602]

Alright thanks bro

[@nautikalhorizon1]

Great video! Will doing this help my IAC valve? I have a ‘04 Expedition and it’s hard to get to and I’m really not sure if it’s bad. I do have idle issues though. This looks like it may help.

[@InsaneOil]

It is possible that Amsoil Power Foam would remedy the IAC valve as there is a small plunger that moves back and forth and it may have restricted movement due to buildup of contaminants.

[@nautikalhorizon1]

Thanks for the response! I will definitely give it a shot!

[@conservativeamerica9655]

I've used it for an engine degreaser for about 10 years! best I've found!!

[@haac4825]

Thanks for explaining with Detail. Amsoil the Best. Powerfoam is Great. Really Works. Videos mostly that I see of this product is with "Eben Synthetic oil protection_the wetter the better". Thanks for Video.

[@InsaneOil]

Thanks for the comment. Good luck with your repair.

[@craigslist474]

You're an excellent teacher. TY

[@InsaneOil]

Thanks for the comment. Good luck with your repair.

[@crisvalerdi5408]

Does this solve p0171 and p0172?

[@InsaneOil]

It is possible that a dirty throttle body is affecting the ability for the correct amount of air to enter the engine.

[@jimmywhittaker709]

I use Berryman B-12 about every other fill up. Helps big time..

[@InsaneOil]

You might also want to check out Amsoil Performance Improver www.amsoil.com/p/p-i-performance-improver-gasoline-additive-api/?zo=10458 and Amsoil Upper Cylinder Lubricant www.amsoil.com/p/upper-cylinder-lubricant-ucl/?zo=10458

[@badgrfan1256]

one of the best instruction videos I've seen on here! thank you! could you please answer a question for me? my old ford truck now has the emission system light on and is now losing power and stalling. how do i know if it is because it needs the throttle body cleaned like in your video or just needs a sensor??

[@InsaneOil]

badgr fan Go to your local auto parts store and have them hook up a scan tool to your vehicle. The code it shows will dictate the course of action.

[@badgrfan1256]

@@InsaneOil thanks man for the response and advice!

[@tutehernandez3233]

Que motor es ese?

[@InsaneOil]

5.4L V-8

[@jrock865]

alright using 2 cans of power foam and an 18 pack we now dont know where we are at and have a handful of bolts randomly left over...just hook it all up and boom works ford tough.

[@InsaneOil]

World War 1 tank mechanics were taught to park the tank in the tallest grass possible before beginning the repair. Once finished with their repair, there was no extra parts.

[@jrock865]

@@InsaneOil haha love it

[@mactownsend2890]

I can't find Amsoil Power Foam for sale on eBay. Any other product you recommend that does the same job? How about Sea Foam? I wonder if I can use Evinrude Engine Tuner... I use it to do the same thing on my outboard than you showed for the F150. Any thoughts? Thank you.

[@mbreckwoldt9813]

Good to know. We will try it on our 2001 Lincoln town car. Well done. Yes, ethanol is the ruination of everything.

[@InsaneOil]

Any luck?

[@mbreckwoldt9813]

@@InsaneOil going to try it this weekend. I had to order a can from Amazon

[@mbreckwoldt9813]

@@InsaneOil worked great. After a 6-0 mile drive gas mileage went up, idle improved. Great stuff

[@InsaneOil]

@@mbreckwoldt9813 Awesome...sounds like a success.

[@ericm6519]

Great vid, but before and after shots of the dirty intake would have made a more compelling case for this product.

[@InsaneOil]

Agreed. At the time I made the video I was going for "instructional only" rather than demonstrative.

[@NikLyons]

Can I use maf cleaner? I heard alot of good things about amsoil and their products. I just don't have the money right now

[@jonothejester]

Personally, I've never had luck with MAF cleaner.

[@noorhabib3855]

Are you doing marketing for powe fome or a general mechanic

[@InsaneOil]

I am a Shop Teacher and an Independent Amsoil Dealer. The videos I make serve multiple purposes. joinamsoil.com/?zo=10458

[@ecrcmodels]

Hi there, I'm in California, there's restriction to get amsoil power foam unfortunately! Do you recommend any other products? Thank you so much Ford f150 2001 v6 xlt

[@InsaneOil]

I think there are a couple other companies that sell similar products but they are all aerosol based which I think are all banned in Cali.

[@jjJackson01]

i cant buy this in california, how can i get this power foam?

[@ericrollins8960]

Buy online

[@javierriveraroman9560]

Thanks you I am from 🇵🇷 Puerto Rico. Welcom

[@josealberto4587]

Why do Puerto Ricans always need to let everyone know they're from Puerto Rico 🇵🇷?

[@DanielGarcia-vo8oy]

Why wouldn't you clean the throttle body flap

[@InsaneOil]

It would be good to clean that as well.

[@luisaldolfoalvarezperalta6556]

tengo un problema con una camioneta f150 v8 tritón tiene un sonido como si soflara el múltiple de aminicion y golpetea leve atrás del motor 5.4

[@mikesautomaintenance5780]

I have to do this on mine but my truck won't run with the air cleaner taken off the intake why would this be anyone know?

[@rvman722]

Straightline Lawn Care could be a vacuum leak somewhere

[@TopShotta713]

disconnect the maf sensor if you have one

[@glennalphonse9711]

Very helpful thanks .👍

[@InsaneOil]

Thanks for the comment. Good luck with your service.

[@P.B.Theriver]

SOMEBODY PLEASE ANSWER THIS QUESTION? What if I lose the red straw from the spray can into the intake? Where does it go and do I need to disassemble the intake to get it out? I've LOST MY STRAW and cannot find it which leads me to believe its in the engine, seriously its no joke, this is the type of crap I deal with every day.

[@Luc89337]

Damn that sounds like my type of luck these days. Murphy's law holds strong.

[@benvicks]

Nobody answered his question😂😂

[@anonimous2451]

Nobody will either. As Forrest said "Stupid is as stupid does" The straw is not needed really. Anyone sucking air into the engine with a straw adapter is asking for trouble. NO You do not need to disassemble the intake cause you will not find it anyway. Drive it to the nearest Dealer and trade it in FAST!!!!!

[@nicholas2932]

3 years too late, but i'll answer you anyway.... if its the same make and model truck you will most likely be ok to leave it. Air moves past the throttle body and straight down into a rectangle well. off to either sides there are 8 intake holes going straight up to then make a u turn to go back down into the cylinders. your straw is most likely down at the bottom of this well (or at the 90 degree angle of the throttle body) and is sitting happily down there for ever. even if it could get picked up and forced into one of the intake holes, it still has to make a sharp u turn. sharper than the straw could maneuver through. if it was me and my truck id leave it and feel confident. if its not a 5.4 Triton v8 than you should look up a diagram of your air intake manifold and think it over.... orrrrrrr. just remove the intake manifold and fish the straw out. couple hours of work, you get your straw back. defiantly not a difficult task on a triton, just take lots of before pictures so you know were everything lives.

[@mariocervantes9305]

Lmmfao 😂😂😂

[@mariocervantes9305]

Were can i buy this product?

[@InsaneOil]

You can purchase this product directly through Amsoil at www.amsoil.com/shop/by-product/other-products/cleaners-and-protectants/power-foam/?code=APFSC-EA?zo=10458

[@jorgearmandomoraromero6912]

Porque una camioneta Ford Lobo F150 2001 se apaga y se

[@vM-ng3hl]

Will it work for an 07?

[@InsaneOil]

Yes, it will. www.amsoil.com/shop/by-product/other-products/cleaners-and-protectants/power-foam/?zo=10458

[@DeFreshS10]

Seriously, it's $20 for an Endoscope. all it takes is $20 to prove whether or not this stuff works.. until I see a before and after, i wont buy your product.

[@grillsandaxlegrease3578]

Driving the car you can tell right away. My snowblower has a consistent idle now thanks to this stuff.

[@lowriderrider]

DeFreshS10 it's not his product. go tell amsoil. I use it in EVERYTHING. kubota tractor, lawn mower, $145000 2015 semi truck, harley davidson, 2005 pickup, and all the other equipment I own. is it better than the other products in the market, YEP I think so. do your own research and stop whining.

[@DeFreshS10]

All I'm saying is you can buy a $20 camera that can look inside the intake and pistons to PROVE it works...

[@rvman722]

Exterminence dont use the granny flush!

[@papaal7014]

Yes she not like that.

[@cesarvalle9532]

bests video gracias man very good

[@reneroman8911]

That’s ok but if you disconnect full body trote it cleaning much better on the back inside of the butterfly I did is way I said clean off all the carbon biocide is accumulate for the pass time

[@guardianofall5913]

Same vehicle as you, my truck has just under 340,000 miles, I've never done this. Should I do this, or should i be fine? I got the truck 2 years ago, have never done this type of service

[@guardianofall5913]

Wondering if mileage makes a difference

[@InsaneOil]

@@guardianofall5913 It cleans everything out and helps it run better. You will notice a difference.

[@machia0705]

Are you still taking questions ?

[@InsaneOil]

machia0705 Always

[@machia0705]

Insane Oil Hello from New Jersey.. I only asked if you were still taking questions because I didn’t see questions here for quite sometime. Great video by the way. I have a 1997 Ford Expedition, 4.6 Engine and it failed emissions recently for insufficient egr flow. I replaced the egr valve, solenoid and pressure sensor. Engine light stayed off for 50 miles when I replaced the egr valve only. When I replaced the other two items on the engine, the engine light returned at 18 miles. I was just wondering if this in indicative of anything. My next step is to go over all the vacuum hoses and remove the egr valve and clean out the intake manifold egr port with a brush and shop vac. Is their anything I can spray directly into the intake manifold to help clean it ? I was hoping there is some type of cleaner to help break down carbon etc in the manifold if ultimately that is the problem. Removal of the intake manifold is something I don’t want to tackle because of my schedule. I have my own business and work six days a week. Please advise, and thank you in advance.

[@InsaneOil]

@@machia0705 Run two cans of Power Foam. It will clean out your system and will help restore the emissions. www.amsoil.com/shop/by-product/other-products/cleaners-and-protectants/power-foam/?zo=10458

[@hottstuff_2847]

This is a gimmick. They think that seeing the smoke coming out the exhaust means the engine is being cleaned. Of course it's smoking, you are spraying shit into the intake!

[@jonothejester]

+hottstuff_284 Every person is entitled to their own opinion. I did the research both on the company and the product prior to spending any money on it and putting it in my vehicle.

[@n.a.s.creations9805]

The Amsoil power foam does work. Amsoil oil puts out a top quality product from a top quality company. I use Amsoil in everything I have. Motor oil, gear oil, transmission fluid, power steering fluid, engine coolant. The list goes on and the results don't lie

[@APC9906]

Great video

[@InsaneOil]

Thanks for the comment. Good luck with your vehicle service.

[@xpandax281]

thanks for your help

[@sternbro]

My 5.4 will not run with everything pulled off of it as you have done. What gives?

[@InsaneOil]

Michael Reeves Rather than removing everything, just disconnect the air intake where you spray it in.

[@sternbro]

@@InsaneOil My engine will not run with this disconnected. I had to put it loosly on using a Seafoam kit. Pull it off. it dies. I'm dumbfounded as to how this worked for you in the video.

[@sternbro]

@@InsaneOil Pulling it off it dies. It changes the air flow? When using seafoam kit the straw goes in and then you slide it over the straw. It dies when removing it. Maybe with someone to crank it one may can keep mine running. I have no help.

[@InsaneOil]

@@sternbro I have never been impressed with the seafoam products. I prefer Amsoil Power Foam. www.amsoil.com/shop/by-product/other-products/cleaners-and-protectants/power-foam/?code=APFSC-EA?zo=10458

[@5.0_life30]

I have an 04’ F-150 with an electronic throttle body and it fuckn sucks ass. I can’t use this kind of foam bcz it will stall and turn off on me

[@InsaneOil]

Best solution is to have someone in the cab regulating the throttle with the pedal.

[@rogeliochavez5437]

Should be better if you remove the throttle body and clean it out side, because your going to damage the catalyst and oxygen sensors.

[@InsaneOil]

I agree with you if the goal was to only clean the throttle body. The purpose of Amsoil Power Foam is to clean intake valves, intake manifolds and throttle plates. This product is safe for fuel injectors, catalytic converters and emissions-control devices. It will not damage seals, gaskets, rubber or plastic materials commonly used in gasoline engines. www.amsoil.com/p/power-foam--apf/?zo=10458

[@LoneWolf-2fb]

My 98 dies if all the air tubing is not connected. Maybe because my sensors are connected?

[@raulm2868]

_American_11x_ mine too

[@tylerkimdura6690]

Amazing!!!

[@ajponch6767]

No I'm confused well I mean ok so everytime we try to start the car it always makes a loud noise and I'm trying to figure out what that is

[@InsaneOil]

What does the noise sound like (squeal, clunk, click, etc)?

[@ajponch6767]

@@InsaneOil I can't explain it but it's a very loud noise it makes before the car starts and sometimes the car won't turn on at all so I tried figuring out what the noise was but I got nothing

[@InsaneOil]

@@ajponch6767 Record a video of it and post it.

[@ajponch6767]

@@InsaneOil a nah we fixed it well we took it to a mechanic and something got stuck so yeah it's all good thanks though

[@scottgarvin4234]

Is this basically the same thing as a "Cleaning the Throttle Body" ? (been suggested to do for an old F150 in many forums)

[@coopergarvin7108]

Thx Jon

[@leocaenf]

Help me

[@cmpunk3195]

whose narrating, Ashton Kutcher?

[@eddie947]

my 2001 f150 just hit 200000 miles and I don't think this was ever done.

[@InsaneOil]

It might help things run a little smoother.

[@willpost5675]

"Don't spray on plastic"... Sprays into plastic intake manifold plenum. huh?

[@henrok31]

Will Post Good point. But I do know ,there are some Poly materials that are chemical resistant.

[@ricksimpson2167]

,,, rubber intake manifold gaskets,,. ??? I just use a Windex bottle and spray water in it,,. Every oil change,,. I know it don't damage plastic or rubber,,. !!!!

[@MarioFGarcia]

It would be better to just take off the hole throttle body assembly and clean that and put it back on. Your method shoves build up carbon into the engine.

[@InsaneOil]

I agree with you if the goal was to only clean the throttle body. The purpose of Amsoil Power Foam is to clean intake valves, intake manifolds and throttle plates. This product is safe for fuel injectors, catalytic converters and emissions-control devices. It will not damage seals, gaskets, rubber or plastic materials commonly used in gasoline engines. www.amsoil.com/p/power-foam--apf/?zo=10458

[@jamesbush7045]

Well done video. Thanks

[@jockarlscarmona3328]

Me acabo de suscribir atu canal,,tengo 2003 4x4 super crew cab

[@InsaneOil]

Gracias por suscribirte.

[@rickiehenderson8460]

need help

[@constable9793]

If by it works you mean it makes it smoke and its cool to watch the pretty smoke, I'd say yep it works. But if you mean it works because you say it cleans the intake system I'd disagree. There is no evidence this does anything more than clean a little oily film off the throttle body. This stuff passes by the valves so fast there's no way it could clean anything especially carbon deposits.

[@InsaneOil]

Thank you for the comment. Everyone is entitled to their own opinion. I have conducted the theoretical research on this product prior to using it on my vehicles and have validated my hypothesis through my own empirical research. I highly encourage all viewers of my videos to conduct their own research on any of the products that I utilize in my own vehicles. Additionally, if any of the claims made by Amsoil (the manufacturer) were false I am pretty sure they would have been sued back to the stone age long ago.

[@TylerSmith-fu9dq]

Bet he lost that 10 mm socket after this video...

[@InsaneOil]

Still got it.

[@leocaenf]

I did it on my F150 2001, then the RPM was low and unstable. It looks like the car will die when I stop at the stop for example

[@InsaneOil]

Did you follow the directions on the can? Afterwards did you take it for a drive?

[@leocaenf]

@@InsaneOil yes

[@leocaenf]

@@InsaneOil drive 10 minutes

[@InsaneOil]

@@leocaenf Let it sit for 10-15 min and do another 10 minute test drive

[@leocaenf]

@@InsaneOil okay I will try

[@rodrigogarciarodriguez5153]

Si me lo podrían traducir en español

[@InsaneOil]

Lo siento, no puedo traducir el video al español

[@rodrigogarciarodriguez5153]

Pero tan solo explicarme cómo es

[@InsaneOil]

Ver el video es mejor que las palabras

[@rodrigogarciarodriguez5153]

Muchas gracias y saludos desde real de 14

[@rodrigogarciarodriguez5153]

Muchas gracias y saludos desde real de 14

[@myprivatewar]

thats not your oxygen sensor. thats your intake air temp sensor

[@InsaneOil]

Agreed. An error in the video which I am unable to go back and fix.

[@davewallace5744]

no flat rate going on here.....

[@jago5300]

Lol I've watched a lot of these videos and I do mean a lot cuz I have some issues. It took some time to understand and figure out exactly what's what . But when you use chemicals like this and the other aspects of what's inside ports around the corner of the throttle body etc you're not really doing anything. And if you pay the mechanic to do this you've just pissed away your heart medicine as far as I'm concerned.

[@InsaneOil]

I would have liked to put an endoscope down the throttle body before and after, but I did not have that available at the time of filming. As far as the claims that the product works, I suppose if it didn't do what it claims to do, then the manufacturer would have be sued a long time ago. As of today, it is still on the market. www.amsoil.com/p/power-foam-apf/?zo=10458

[@SinoLegionaire]

Man drafting and cars? You are an everything engineer aren't you?

[@InsaneOil]

Keep searching...you'll find some metalworking and woodworking on my channel as well.

[@dannypalmer7701]

I need to see where the hard vacum lines go.Dont need talking just showing.

[@jonothejester]

That's an easy solution...mute the video.

[@Poohdaddymagic]

This advertisement brought to you by Amsoil Inc lol...

[@InsaneOil]

Nothing but the best www.amsoil.com/?zo=10458

[@GatesRapes]

I'll stick with CRC and elbow grease

[@InsaneOil]

Thanks for the comment. CRC is a well known brand.

[@cbr1thou]

So take all that dirt n shit and suck it all into your engine??? If its real dirty just yank it, clean it, new gaskets n shit

[@TOOFERMAC53]

This will f****** your engine

[@InsaneOil]

My engine runs great and I did this service over 6 years ago. I should probably do it again. Perhaps you did not read the directions on the can.

[@Rob-rl2sx]

Just had mine done at ford dealer 2015 f150 v8 idle good now $210,00

[@baddrivercam]

As soon as you call the mass air flow sensor a Oxygen sensor. I know it's time to turn off this video!

[@InsaneOil]

Actually, what I called the Oxygen Sensor is the Air Intake Sensor. It was an simple verbiage error on my part while I was recording (as noted in multiple comments that I have already responded to) Unfortunately, I have no way of updating the video once it is posted to KZbin, thus I can only respond to people criticizing my error.