2001 Sportster Shift Shaft Replacement

[@carlk.benson9570]

It's a sequence to properly replace the shift shaft correctly. I needed to get educated on this. Great help thanks alot

[@davidkennedy2573]

Great video, very clear and to the point. Mine is not shifting into 5th and hope its the shift shaft or pawl adjustment and not messed up shift forks or drum.

[@juanojeda2982]

If you remove primary cover and stator and clutch basket you should be able to shift through the gears with the drum if you can’t rotate shaft while you do so and if still then I deff have burrs in the drum and possible shavings between the snake groves the kind slide in and check those on N.A. turn them upside down and reuse .

[@BillTheHarleyGuy]

great video very thorough looking forward to your next video 👍

[@realfastnowhere]

Thank You Sir. I tried to make is comprehensive enough to understand

[@rithonn4373]

Do you know if the shaft needs replaced if my 1st gear is slipping into neutral? I adjusted the internal clutch and it works but after a while it starts slipping again. I am told it has something to do with the shift shaft or shifter dog but not too sure where to go from there.

[@s.plissken.924]

I got around to doing this because my shift shaft was bent and that little Detent plate clip blasted off and shot all over the primary. I replaced the shift shaft assembly and even that tiny spring. Put it all back together and I got a ton of play in my shifter, like the shaft spins wayyyy too much. Shifts fine but just a lot of play. Any idea what I fkd up??

[@williamardenjr116]

How did you pull that without the bearing in the back!

[@frankiv5786]

Does anybody know where id find specific parts for the pawl assembly?

[@coledixon6285]

All on parts giant I found the shifter pawl at my local Harley just by chance but everything else off parts giant

[@williamardenjr116]

My 01 buell all of that os together!