2002-2006 Honda CR-V window regulator replacement

[@jakeleytrick3688]

Mechanic wanted over 300 bucks. Took me 30 mins and the part was 50 bucks. Thanks buddy 🙏

[@RustBeltAuto]

So your time is worth 400 an hour. You must be rich.

[@bri-0s]

Literally anyone can do this if you follow the video!! I'm a 28 year old woman who doesn't know ANYTHING about cars, but with the help of this video, I was able to replace the motor and regulator, and now my window goes up!! Thank you so much!

[@chrisbell5032]

Unless you are me, and everything you touch turns to broke!

[@BhanteWayne1]

Got the regulator and motor for $40, you gave me the information I needed. Thanks, brother

[@RustBeltAuto]

You're welcome.

[@YossDillo]

you're a lifesaver! it took a couple hours and $85 for the part but my window works now for at least half the price of a mechanic! thank you!

[@misawajason]

Thanks for the video. Helped me knock out my 2005 replacement in less than half an hour, all the while teaching my two boys about all the parts involved. It was fun.

[@cogiccowboy3168]

Me too ! Thanks for taking time to make videos and help others. Made my job so much faster not having yo figure it out from scratch. Got the part from Amazon for under $50 and took under an hour to install. God bless you and all that concern you !

[@joestocker660]

Tackling this task with my son today. Seriously appreciate the breakdown, fast-forward parts and everything. Subbed. 👍😎

[@captinhindsight7345]

Thanks for the tutorial, just finished replacing an old one for a new one and this video helped a lot!

[@Xicano414]

May I ask where you bought a new one?

[@captinhindsight7345]

@@Xicano414 I got my part from advanced auto parts, it was 81 dollars for the part but got it down to 70 dollars in total with online coupons they have on there website so if you’re looking for a part I’d call the store to ask and see if they have in stock then purchase online to do same day in store pick up. Look for the coupons online and you can usually get it down to maybe around 10 to 15 bucks off, it’s always better and usually cheaper if you wanna save a couple extra bucks.

[@hungrywendell5758]

This just happened to my car, I appreciate this video rn very much.

[@snowsk8justen]

Thanks man! I tried to do it by myself without any help and had no idea what I was doing. I got pretty far but I didn’t take the old one out. But I could tell they was the problem because the wire was everywhere and that metal plate they holds it into place had fallen down !

[@clarkstone-bear7742]

Literally the best how to video iv seen. Thank man!!!!

[@00boomerbee51]

Thanks so much! Me and my dad were struggling but once we trued cutting the wire we were able to figure it out and fix my window! Great stuff man

[@matthewwhitney4731]

Thanks for the video. Followed it step by step and my window works with the new part now!

[@alfordkessinger6704]

Very nice video. It waked me thru it step by step. I like the way he expanded it as if I knew nothing about what I was doing, and I didn't. Thanks and my window now works.

[@SusanBofSBStitching]

Great video thank you, it made it easier for my step dad and I to fix my window.

[@ericwoll8301]

Thanks, made it so easy to. Anybody else reminded of the great Newhart show?

[@allenh5389]

As good a show how as it gets. I was dreading attempting this. He makes it straight forward.👍👍

[@santiagomayorga5835]

I have the same problem! Thank you 4 this!!! Greets from Ecuador

[@jeffmayo6501]

Thank you for a great video that saved me a lot of money!

[@josrodriguez200]

Just fixed mine! Thanks for the video it was really helpful!

[@theonlynull]

What should you do if the window doesnt go down the rails as easily as yours did? I went to the junk yard today and my window refused to go down the rails so i had to cut the rubber window frame in order to get enough space to pull the railing, regulator and all through the top. I couldnt find space to detach the window from the rail. Trying to find a way to do it without damaging the window frame rubber if possible when something like that happens

[@RustBeltAuto]

@@theonlynull if your regulator is broke, and will not allow the window to move, you need to either unbolt the window where it sits, or cut the cables, to get the window to move.

[@SplintCrackas]

“Yo! ...Okay bye!” Great video!

[@JamesBerlo]

Thank you , you are a Life Saver !

[@chrisbell5032]

Best ever ending, like Neil Peart(drummer) at the end of a Rush gig .

[@jpritch2]

what do you do if window will not come down .... only bracket comes down and not enough to get to those two long bolts that hold window plastic ledge. help.

[@RustBeltAuto]

@@jpritch2 if you can cut the cables, it should move.

[@jpritch2]

@@RustBeltAuto actually I was able to get a wrench on one of those two bottom bolts. Then I was able to pull bottom of track towards back of car, allowing the window to come down, even though it was still frozen in the track. Then I was able to get the right hand bolt out.

[@iantoney8726]

Thank you! Getting ready to try to do mine now!

[@drgaming6270]

That outdo deserves a like

[@rudydoody503]

What a lifesaver. thank you man 🩵

[@keronlopez2313]

Can I use the main window switch Of a 2004 on a 2002 crv ?

[@RustBeltAuto]

My sources say yes

[@Ken0la]

Awesome video, saved me $$$, kudos

[@patmclaughlin1590]

Very helpful video, thank you sir!

[@godygody8991]

Any idea how can I get only the 2 plastic that hold the glass, everything is working fine only those 2 plastic are cracked and won't hold the glass anymore

[@RustBeltAuto]

Maybe try the dealer.

[@ryanmccue8180]

You could try a hard silicon from a caulk gun maybe

[@CAMERAMAN173]

Excellent video

[@RedRebel8]

There's no power getting to my regulators motor... any ideas? It's not the fuse.

[@RustBeltAuto]

Possible broken wire between door, and pillar post.

[@caleblandis4762]

How do I get the window down if it doesn't move easily?

[@RustBeltAuto]

Cut the cable?

[@caleblandis4762]

@@RustBeltAuto Yep that worked! Thanks

[@MrFortnoxtt]

Good Job! Very Very Helpful. What is the Extra plug at top?

[@RustBeltAuto]

I don't know.

[@junsantos4297]

I tried to push the window down but it won't budge..any idea how to lower it ao I can loosen the bolts?

[@RustBeltAuto]

Your gonna need to get your arm up in there to take them off. Sometimes I can unbolt the regulator, and drop the whole thing down. Be careful, don't break the window, and be creative. Best advice I can give you.

[@megankelsoe9031]

I am still trying to get my window down 🥴

[@lovepirate77]

This was very helpful! Thank you so much!

[@RustBeltAuto]

😁

[@813werdy]

Would I need a new motor and regulator if one of my windows worked but stopped all of a sudden

[@RustBeltAuto]

Best to induce power into the motor to test it.

[@TheRealPamAlam]

Awesome video! Thanks for this; I was able to do this myself!

[@Optillistic]

What breaks at 5:04 ????

[@petar443]

7:54 what kind of tape is this ?

[@RustBeltAuto]

3M 8979

[@bentizzy780]

Awesome video, is there a special kind of tape you used to put that plastic sheet back onto the door? Thanks!

[@RustBeltAuto]

I usually use regular masking, or duct tape.

[@corbana4743]

Great short video

[@oldschooltakingyaback]

How do I take the window out? It's driving me mad.

[@RustBeltAuto]

To remove window on most cars, you usually need to pull out the weatherstripping, and sometimes unbolt the track for the weatherstripping. I cannot remember for sure on this vehicle.

[@MrHasie]

succinct and that ending, loved it.

[@septicswank]

Thank you so much for this bud!

[@RustBeltAuto]

Welcome!

[@sweteart5188]

I need to do this but my window is stuck down I can’t get it up!! Any tips? Great video

[@RustBeltAuto]

You might need to unbolt the window, and pull it up.

[@sweteart5188]

@@RustBeltAuto Thank you! Does that include the motor? Just need to get the window up whilst waiting for the part 😅

[@rover6591]

Thank you! This video save my)

[@junsantos6813]

hey man thanks for the awesome video. love the sign off!

[@CrashSiteZERO]

Thank you homie!

[@sochill2064]

much appreciated my friend

[@ashleypitts2752]

Love this! Thanks! Super funny by the way!

[@RustBeltAuto]

Thanks fir watching!

[@mikeray4578]

Great video!!

[@ameeestill6003]

Do you have written instructions for this?

[@RustBeltAuto]

No

[@paydenlee3949]

How much does labor usually cost?

[@RustBeltAuto]

I don't know.

[@joshuagreen7891]

70$ or more

[@wilsonme2]

$605 at the Honda dealer for the regulator; $76 at Advance Auto Parts.

[@RustBeltAuto]

30$ mail order.

[@GloriousYeshuaAlMightyHolyGod]

Thank you so much!!!

[@RustBeltAuto]

Your name is a little much don't ya think? If I had a name like that, I would try to be less popular, and understated. You are welcome.

[@GloriousYeshuaAlMightyHolyGod]

@@RustBeltAutono I don't, thanks but no thanks, ok next 😆!

[@DJitdo]

Thank you!!!!!!!!

[@nelsonruiz758]

Ihave that exact same sky cap!

[@Archie106TV]

This guy sounds like Ray Romano

[@mr.kennedykelechi]

He knows his onion

[@makaylasands1202]

Don't cha know

[@RustBeltAuto]

I'm trying to forget.

[@lesliehorne1350]

He said yo

[@RustBeltAuto]

YO!

[@velc3527]

english girl name fiona

[@RustBeltAuto]

Why would you say that?

[@johnswan9123]

Thank you good sir.