Thank you bro great with you actually I open first time so many confusing in after that your video Watch where is simple also easy😊😊😊😊😉😍😍
@TheInteriorAutoMechanic2 жыл бұрын
Happy to help! Please consider liking the video and subscribing to the channel!
@dickmadison96197 ай бұрын
My right rear door on my camry looks very similar to the corolla. Purchased a used door but the regulator plug was different from the harness plug. Got one with the correct plug on the motor to match the harness plug but when installing the new one, I can not get 3 of the 4 bolts to line up. With the glass disconnected and the rubber seal and track removed and the plug boot in the larger hole and with one bolt loosely holding it in place, the others do not line up. Looks as if they need to be rotated about 1/2" to line up. The mechanism will not turn any further. The glass was in the up position when I started. Tried reinstalling the original and got the same results. Have you run across this? Any suggestion appreciated. :) dm
@tonydavies48172 жыл бұрын
Great videos! Thank you. Would the Corolla FRONT door tear-down be approximately similar to this??
@TheInteriorAutoMechanic Жыл бұрын
I'm extremely sorry for the late reply unfortunately I never got a notification that you commented on the video. Yes the front door should tear down very similarly. Please consider liking the video and subscribing to the channel!
@junzilla13 Жыл бұрын
Hey, I'm on the step where the window regulator is removed but i can't wiggle the window out. There is very little play. Not sure what I'm doing wrong. I can move the window up and down but can't turn it at all. The metal bar stops me from doing so
@TheInteriorAutoMechanic Жыл бұрын
Hi there! If you can give me a time stamp on the video as to where you are at I'll do my best to help you.
@junzilla13 Жыл бұрын
@@TheInteriorAutoMechanic I figured it out. You have to remove the rubber window seal and then was able to get the pillar out. Then the window comes out eZ
@junzilla13 Жыл бұрын
@@TheInteriorAutoMechanic all that work to change a lock actuator. Have to remove two windows, a pillar, window regulator, window rubber seals and all that trim.
@TheInteriorAutoMechanic Жыл бұрын
@@junzilla13 Happy to hear you were able to get it taken care of! Please consider liking the video and subscribing to the channel!
@junzilla13 Жыл бұрын
@@TheInteriorAutoMechanicboth done 👍🏻
@sheilacrawford9739 Жыл бұрын
Is there a way to replace the tiny window of the door without removing the door panel? We just bought the car, but it's missing the tiny window. The guy we bought the car from gave me the little triangular glass & casing. We just don't know how to fix it. Please help anyone who knows. Can't afford the tools at the moment if we can get by.
@TheInteriorAutoMechanic Жыл бұрын
Happy to help! You will need to remove the door panel HOWEVER you don't need all that many tools to do this. Basic tools like a flat head screwdriver, phillips head screwdriver, ratchet and a 10mm socket should get the job done. Any basic cheap tool set (less than $15) should have these tools in it. If you do not have the money to spare you may be able to go to your local AutoZone and borrow the tools and use them in their parking lot. It isn't a hard job to replace the glass just take your time and watch out for broken glass. Hope this helps! Please consider liking the video and subscribing to the channel :)
@eliavecellio2 жыл бұрын
Very clear instructions. Thanks
@TheInteriorAutoMechanic2 жыл бұрын
Happy to help! Please consider liking the video and subscribing to the channel! Good luck on your project!
@stevenumana9034 Жыл бұрын
Literally the only part we’re stuck on is that screw at the top where you just picked it out with easy! Ours is stuck and we’re afraid of stripping it!
@TheInteriorAutoMechanic Жыл бұрын
What is the time mark in the video as to what you are talking about? I may be able to help.
@stevenumana9034 Жыл бұрын
@@TheInteriorAutoMechanic thank you for such a quick reply! I didn’t expect that! It would be at 2:45 or 2:47, is the screw I’m talking about
@TheInteriorAutoMechanic Жыл бұрын
@@stevenumana9034 No problem at all! Grab a magnet after you've loosened it some and put it on top of the screw and see if you can pull it out that way.
@stevenumana9034 Жыл бұрын
@@TheInteriorAutoMechanic we can’t even loosen it that’s the problem 😢
@TheInteriorAutoMechanic Жыл бұрын
@@stevenumana9034 If it's not moving you haven't stripped it. Do this. Make sure your screwdriver fits the screw perfectly (there are different Phillips head bits) take a hammer and tap the top of the handle of the screwdriver a couple of times then try to turn it.