2003 Hyundai Santa fe 2.7L V6 / Timing Belt Tip

[@lagotobluesummers7553]

I'm having that same issue and I've been fighting to get the belt on. Thank you for this tip. 👍

[@NoneMechanic101]

@@lagotobluesummers7553 You’re welcome

[@OnlineAutoRepairVideos]

That is a nice tip because I have fought with those things so many times! Removing the tensioner is the BEST way, thanks for that! 👍👍👍👍👍

[@htatesil4192]

Hey its Timmy lol

[@OnlineAutoRepairVideos]

@@htatesil4192 🤣🤣WOW!!!!!!

[@NoneMechanic101]

🔧

[@NoneMechanic101]

🔧👍

[@htatesil4192]

@@NoneMechanic101 just brought a 2.7 hyundai sonota 2002 67k miles it sat for 6 years in Florida then they drove it to Seattle where I live and it sat 3 years ima pull the engine out change the heads I got Timmy's videos and this helps alot my friend just destroyed his the cams got bent people gotta take this timing belt serious because it's a interference engine

[@Kyle_gallegher]

You gotta take out the tensioner on the 2.7 to do it right. Replace it just in case with the water pump is highly recommend

[@miguelgonzalez684]

Good tips thanks you very much 😊

[@NoneMechanic101]

You’re welcome

[@robertharrell8000]

Best Mechanic And A Very Helpful Friend.... Highly Recommend....

[@NoneMechanic101]

Thank you. I appreciate it👍🔧

[@sunray0162]

Thank you, I was having such a hard time until I saw your video.

[@NoneMechanic101]

Your welcome. Thank you for watching

[@vinnyc.1265]

Yup going over the tensioner on the Delta engine, always will cause the belt to pull the CAM pulley on Bank 1. The trick I do? I put the timing 1/2 tooth in the opposite direction, so when the belt goes to pull, it pulls it into time. Then rotate twice, and it should be spot on. Done my Timing Belt on my Tiburon many many times.

[@NoneMechanic101]

Thanks

[@mistersolarpv]

thank you for taking the time to post this!

[@NoneMechanic101]

Your welcome

[@whoisharo4689]

Yes these 2.7 delta engines this is the ONLY WAY to put the belt on HOWEVER what I did with the cams above is zip tie the belt to the cams so they stay tight on the right side.

[@NoneMechanic101]

Great. Thank you. I will keep this in mind.

[@Boom10ful]

Hello, I replaced the belt on my car a year ago and I happened to pop off the upper timing cover and the belt is loose on the water pump side. I replaced all of the timing components with OEM parts except for the timing belt, which was a Gates brand belt. Is it normal for the timing belt to have slack on the water pump side? The idler and tensioner sides have good tension, but the water pump side is so loose that I can turn the water pump pulley by hand.

[@NoneMechanic101]

Can you send me a video. Email me [e-mail]

[@leosimon1746]

my car has the exact same issue just as you described - slack on the water pump side but not the other. Did you find an answer? thanks!

[@joonajks]

Are these automobile very reliable for heavy driving use?

[@NoneMechanic101]

Hyundai Santa fe can be a reliable car if is taken care off.

[@DKSE123]

Lining up the marks & replacing the timing kit are the easiest to do . I never had an issue doing these

[@NoneMechanic101]

Thanks

[@leosimon1746]

hello sir, do you need special tool to replace the timing belt on this vehicle? Thanks!

[@NoneMechanic101]

No special tools. Just your regular sockets and wrenches

[@DKSE123]

No , You Don't

[@danielramireziglesias102]

I have a hyundai santa fe 2003 with a 2.7 v6 engine that I need to change the water pump and the timing belt, if you could explain it to me in more detail in a video

[@NoneMechanic101]

It would take me a little while to explained it. They have a couple of great videos in KZbin explaining it.

[@jwrn4u]

had a car with timing belt once, never go that route again, I check, to make sure the car I am buying has a timing chain

[@NoneMechanic101]

Many of the car companies are going with timing chain. Timing belt are very difficult to do.

[@lar4305]

They are not hard to do, most cars with chains today have problems, It is much easier to replace a belt then a chain.

[@brettconv83]

Yeah good logic until you have to do timing chains

[@brettconv83]

Honestly the timing belt on the 2.7 is easier to do than spark plugs and valve covers and less time consuming

[@brahayamhernandez3815]

@@NoneMechanic101 I got a 97 honda accord v6 2.7l 24 valve does my timming belt run the same way as this santa fe and are the best engines the same

[@OffGridInvestor]

I have heard another way is to wind the cam closest to the driver BACK one tooth. And then when it slips it IS lined up properly.

[@NoneMechanic101]

Thank you for this information. I would try this in my next one. 🔧

[@brandiborem3452]

My timing belt broke off my 2002 Hyundai Santa Fe and bent a valve or two is it worth fixing still

[@NoneMechanic101]

That is a decision you have to make. If you are going to fix it yourself remember is going to be a lot of work. If you are going to have someone else do it. They are probably going to charge you over 1,000 dollar.

[@brandiborem3452]

How can I tell where the no compression is coming from I want to fix it if it's cheaper to do it my self

[@NoneMechanic101]

@@brandiborem3452 , see if this video can help you out. Don,t forget to use SAFETY at all times. kzbin.info/www/bejne/kHnVY5WYqs6Kn9k

[@raulcabronero5649]

Hi there. I beleved this is the same motor i have on my tiburon v6 I need to ask when you talking about the part cut off in the video sorry becauae i didnt understood. .. for be clear you take out the tensioner completly from the motor after the fail pf the timimg jump and then put the belt around the pulley and then put back the tensioner or you jist say you commit the error didnt pullout the pin from the adjuster until habe the correct time and then pull put the pin? What of this 2 you do for fox the issue. I didnt ever di this job but i want to tdy for do bymyself i have skills and tools. I didnt want to have this probkem so i see videos and find you and i ear about this happen to this engines. So. Let me.know what you try to say on video im confuse if you talking about pull out completly the tensioner and put the belt and then put back and pull out the pin or just dont pull the pin until habe the correct time ?

[@raulcabronero5649]

Did you speak spanish?

[@NoneMechanic101]

Yes

[@robertcarew1830]

Soon as I find new power steering and serpentine belt tensioner bolts I will be doing the belt on a 05 Tuscon and I think you just saved my life LoL oh any idea where I can get those bolts? I try the junkyard, eBay and rockauto and can't find them....

[@NoneMechanic101]

You tried all the places I would have try.

[@robertcarew1830]

@@NoneMechanic101 I was afraid of that lol ok one more question...I got this Tuscon for $500 the timing belt was already off and I didn't get to see if it broke or what happened, I do know that the water pump is locked. They said it happened in there driveway I used a scope to see inside the 3 piston Chambers on the front and I do not see any marks at all on the Pistons, if the belt broke it would do visible damage right? Either way for $500 I got an 05 Tuscon in very nice condition and it also came with the timing belt kit...

[@brighter22]

i actually moved the left sprocket out of time putting it on and when released it moved back to line up. it is a pita.

[@NoneMechanic101]

Did you put it back in place?

[@Luckingsworth]

Thank you for the video.

[@NoneMechanic101]

You are welcome.

[@lucytristan-oz1sw]

Anytime you do a timing buy yourself some small vice grips at O'Reilly's and put them on the camshaft sprocket and the timing will never been doing this too long😅😂😢😊🎉❤

[@NoneMechanic101]

Thank you

[@Tradog1]

How long did it take you to tear it down and put it back together in time?

[@NoneMechanic101]

If I remember correctly in took me about 2 hours

[@DKSE123]

Mine took about 3 hours

[@NoneMechanic101]

It took me about 7 tries

[@cfchrischris]

So many think its their rod bearing, and immediately discard the car .

[@NoneMechanic101]

🔧

[@aubreynoraqa3919]

This is my daughter's mother car 🤔

[@NoneMechanic101]

🤦

[@christheother9088]

Changes timing belt for ex-wife. He's going to heaven for sure.

[@omolajarasakiadesola9177]

I want to no about the Kik

[@NoneMechanic101]

?

[@Shakerhood69]

Nice work

[@NoneMechanic101]

Thanks👍🔧