2003 Infiniti G35 Backup Camera Install for Android Head Unit

In this video I follow up the install of the Pumpkin Android 8.0 head unit in my G35 with the install of a Veclesus C1 backup camera. This install turned out to be fairly easy as long as you know what wires to splice into for the reverse light power.
Parts:
Backup Camera: www.amazon.com/gp/product/B07...

[@timwong3532]

Great video, JR. Thanks for sharing. Just wanted to add that the reverse wire is orange for 03-06 G35 sedans, and PURPLE for the coupes. If your headunit needs a trigger to switch to the reverse camera input as well, the same wire can be located under the long skinny kick panel by the driver's door.

[@JRsGarage]

Great, thanks for the comment.

[@invalidusername_5101]

Nice

[@calvinjoshua22]

Ur a goat thank you for that clarification

[@calvinjoshua22]

Everywhere i look it says purple wire with grey dot every ~1.5 inches

[@babloo1666]

Thank you I'll be following this guide exactly, so it's the same orange wire for cars in the United States as well?

[@JRsGarage]

Should be, I purchased my car in Minnesota.

[@jmsquirrel2]

I'm glad you did this video. I'm working on an '04 G35 sedan right now and I couldn't find that ground screw you exposed. Also, I had been told the reverse wire was purple with silver spots. I didn't want to pull all the clips from inside the trunk lid to find it. How did you know to use the orange wire?

[@JRsGarage]

You can ground out to any screw just as long as it it goes into metal. I live overseas and they have reverse fog light requirements over here so I had already done the work of finding the reverse wire because I replaced one of the reverse bulbs with a red one for the reverse fog function.

[@JRsGarage]

Glad to be of help to you.

[@benjaminperley5272]

So sorry to bump a three year old video with a question, but I think you skipped the part showing where you ran the wire inside the passenger cabin. How did you get it from the backseat to the head unit?

[@JRsGarage]

I ran it along the side under the door sill. I think I just pushed it under with a plastic pry tool and didn't actually remove the sill.

[@jimmyhernandez9836]

Hey thanks for the video I have a question, the wire you use to splice it together, whats the gauge rating ?

[@JRsGarage]

I wouldn't worry too much about the gauge I think I just used what I had left around on hand. You're not carrying any significant current, just the signal.

[@xYourMOTIVATIONx]

@@JRsGarage thanks !

[@satanpotato8927]

Bro I have the ugliest factory reverse camera on my car it is disgusting… how do I get rid of it?

[@JRsGarage]

I can't imagine that any aftermarket camera is going to look better than the factory one. Usually the aftermarket ones look like junk.