2004-08 Audi A4 Rear Driveshaft Carrier bearing replacement

Рет қаралды 20,731

Күн бұрын

Пікірлер: 33

@jamingmike966 Жыл бұрын

awesome video and jus subscribed and fixing to have a pcm put in my car will ans was told $200.00 including programing on a 2002 chevy impala 3.4 engine

@willpoweredgarage969 Жыл бұрын

Hey Mike!!! Thanks for stopping over here! That price does not seem all that bad. It has to be programed on top of being installed. Sometimes that includes reprograming a few other modules. I do not know much about the impala it self, but the vw and audi PCM can be very expensive!

@michaspruijtenburg5109 Жыл бұрын

You the best 🤘🏼 I never figured that out. Your video makes it easy now😁

@willpoweredgarage969 Жыл бұрын

Awesome, It was a learning curve for me as well. Fortunately I have taken apart enough cv style joints I had an idea of what was going on. Thanks for watching and the kind works.

@izaiahencinia5177 Жыл бұрын

Yo bro what tool did u use to take out the bolts on the rear end of the driveshaft

@jamingmike966 Жыл бұрын

i had a aditional question will on the 2002 impala if the tumbalrs are bad in the ignition switch sohuld i get that fixed before i get the pcm replaced and ive been told the igition switch has to be reprogramed from your biggest fan on fff hope you dont mind me asking questions im not that good on vehicle repair and know alittle not much though

@willpoweredgarage969 Жыл бұрын

Well, if you are having trouble with the key not wanting to turn because the tumblers are bad or going bad, I would def take care of that before getting the PCM replaced. Why are they replacing the PCM by the way? Feel free to ask away with questions, Ill answer what I can. Also, Thanks for the Superthanks!!! Its very much appreciated!

@jamingmike966 Жыл бұрын

@@willpoweredgarage969 i had it digonsed at gm dealership because the new ac comprossor wasnt cominng on wired like it is and workef a short time hooked directly to a toggle switch which nlew the 15 amp fuse and thee compressor works and before neighbor put ew compressor on we thought that was the problem and after new compressor was on didnt work till he bypassed it and tested the clutch on old compressor and it work and the cruise contrl quit working agaiin after we tried hooking the toggle switch up which blew the fuse and the cruise control quit working once before after i changed the ac relays and the ac started working again for a day or so and then quit working again and that was when the cruise control quit working for awile

@jamingmike966 Жыл бұрын

@@willpoweredgarage969 besides the car acts like it is missing out not firing right and the plugs was replaced and the plug wired are good and had abot $5000.00 including 2 tires since july of last year and hope first reply back doesnt confuse you

@quarkymatter Жыл бұрын

Stripped one of the allen head bolts on the flange. The start of a long night...

@willpoweredgarage969 Жыл бұрын

I have been there plenty of times. I usually will try a torx socket and hammer it in to the allen bolt and carefully by hand try and remove it. Good luck.

@joshuawelch9701 Жыл бұрын

did you ever contact 034? i need to change this bearing but dont wanna have to break out the welder,, also what were the symptoms that this vehicle was getting ? thanks.

@willpoweredgarage969 Жыл бұрын

I actually forgot to reach out to them. I might do that now that i am thinking of it. The bearing in the center was making a humming noise similar to a bad wheel bearing.

@quarkymatter Жыл бұрын

@willpoweredgarage969 was this noise associated with acceleration and not speed? I get a wild thumping from the rear under acceleration. I'm hoping it's just the carrier bearing and not slipping rear diff

@antoniosale626 2 ай бұрын

I’m getting the same thumping from the rear under acceleration that’s more than a 1/4 throttle. I cannot figure out wth it’s coming from.

@izaiahencinia5177 Жыл бұрын

I’m having a hard time finding the tool u used for the rear driveshaft removal can you help

@willpoweredgarage969 Жыл бұрын

What tool are you referring too? The driveshaft itself is held into the car with basic bolts. Nothing special there.

@izaiahencinia5177 Жыл бұрын

@@willpoweredgarage969 what size did you use to remove those bolts ?

@nefgarza6419 Жыл бұрын

@@izaiahencinia5177 I think they are 6mm Allen bit

@maciejkuzma8186 4 ай бұрын

Any problems after replacement? A4b9 I have the same problem

@willpoweredgarage969 4 ай бұрын

No problems at all. Worked perfectly after the modifications. Thanks for watching

@maciejkuzma8186 4 ай бұрын

@@willpoweredgarage969 great The same shaft is in A4 b9

@av0511 Ай бұрын

Have you replaced it on your B9? Did you rebalance driveshaft after that?

@deejay4837 10 ай бұрын

Great informative vid. That shirt...where are you btw?

@willpoweredgarage969 9 ай бұрын

Thanks for watching! That shirt is one of many I got from my late grandfather. He would regularly donate blood and volunteered at the local hospital.

@516w8bsjs 11 ай бұрын

hi, what is the catalog number of the replacement drive joint?

@willpoweredgarage969 11 ай бұрын

034-506-0003 is the part I used from 034 motorsports. Though I do remember having fitment issues with there part. Hope this helps

@516w8bsjs 11 ай бұрын

@@willpoweredgarage969 Thank you :)

@MrNhekairo Жыл бұрын

But the video is not shown how to remove the aluminium cover

@willpoweredgarage969 Жыл бұрын

No, but I do explain it in the video. You basically need to work your way around it with a small prying device. Must be careful because there is an o-ring seal under it.