2004-2015 Nissan Titan Crankshaft and Camshaft sensors PROBLEM SOLVED

This video shows the problems the crankshaft and camshaft aftermarket sensors hat on my 2010 Nissan titan 4 x 4 flex fuel and how I fixed it and it is working just fine and has been doing much better and all my codes are cleared now this is the video on how I did it I couldn’t find any other KZbinrs That had made a video solving this issue so I figured I would post one to hopefully help at least someone out.
Crankshaft position sensor
Part number: 23731-AL61A and AL61D (works too worked on my 2010 Titan)
Camshaft bank A B and C all the same sensor,
Parts number: 23731-4M50D

[@dealseeker2129]

Everybody just plain "says OEM Only" like a Robot. Which costs us all a fortune and in many cases the additional cost is not worth it. I hope you get refunded on bad aftermarket parts. Thankyou for personally testing these after market parts THEN suggesting OEM to save us the cost and hassle! Great video Man, Thanks!

[@cortezsonnen1693]

Yeah I returned the parts back to autozone

[@user-bo8lk9sz8d]

Thank you man thats really helpful ...today i was driving to work and i stopped in a stoplight and shifted to N and after one minute the car suddenly turned off and one minute after it started ...when i started the car before going to work it to 3 long ignition attempts to finally start and thats what happened to me ..i have a nissan armada LE 2008

[@adammaslonik4622]

Thanks for that. Just got '17 titan with 50k and record of crank sensor replaced at 45k. Beginning to think they used aftermarket sensor cause after 100miles of ownership its throwing crank sensor code and abs in rear, same as you. Napa, AZ and AA cannot carry these sensors (2/16/23). Seems Nissan cut off the aftermarket, apparently for good reason. Good clip even for 2nd Gen 5.6 titans.

[@scottg247]

Thank you so much for this video, my truck had had this issues for the 6 years I’ve had it, randomly wouldn’t turn on. Recently it started shutting off and I couldn’t find people with the same issue. Hope this solves my problem. Thanks

[@cortezsonnen1693]

Ofc man I’m late to replying I just became a police officer and it’s been crazy especially at 21 years old.

[@altoneiland5919]

You’re definitely a life save just had this issue

[@Nick102195]

You’re actually a lifesaver bro. I have an 08 2wd Delphi sent me part for camshaft. I needed the crankshaft position sensor. Usually Delphi is good but I Went with your advise and got straight from Nissan. Cranks right up

[@cortezsonnen1693]

Yeah no problem all my lights were going off and there were so many codes going off so once I fixed it I felt like I had won the lottery lol

[@paulcuddle664]

How about your MAF sensor did you change that too?

[@janellejanney]

Thanks for the share.

[@leonardogalvan6079]

Hey I’m having the same issue On my 2010 Titan bank a is bank 1 correct ? It best to swap all em at once ?

[@rickysahjal896]

Do you know what the code was i am getting P0011 code bank A so is it crank shaft or solenoid replacement? I am confused

[@cortezsonnen1693]

Sorry for having comments off guys it was on “made for kids”

[@mikisrobinson9984]

@cortezsonnen1693 When you fixed this issue, did uou start to get better mpg

[@cortezsonnen1693]

yeah it went from 7 mpg to 10 mpg@@mikisrobinson9984

[@MrPaknight]

Do the oem ones say hitachi on them?

[@cortezsonnen1693]

Sorry for not being able to reply man I just became a police officer and it’s been crazy especially at 21 years old. But yes Hitachi is OEM

[@kcohan2435]

So your vdc off and slip light were on, along with check engine light?

[@cortezsonnen1693]

Yeah everything was going off and saying it was messed up

[@cortezsonnen1693]

@@Sushi2247 it took me a while and kinda emptied my pockets to figure out this was the issue hopefully with this video it can save you a lot of time and money

[@SupaCarlWayneTV]

How you still got this truck send me your number I live in Texas