Symptoms of Bad Crankshaft Position Sensor (Explanation Why It Fails)

Symptoms of bad crankshaft position sensor. In this video lesson, I will tell you the function of a crankshaft position sensor, how it works and what cause it to fail. It is important to not drive with a faulty crankshaft position sensor simply because the vehicle can stall while driving.
A failing crankshaft position sensor can also cause hard start and no start.
Top5autorepairs
An automotive educational channel
Subscribe

[@CrazymakerViper]

Probably the simplest and best video explaining the crankshaft sensor I’ve found online so far, well done my friend

[@jamesstevens3507]

For reals. Thanks

[@TheRogermursick]

Great tutorial. Short and sweet and to the point. Much appreciated. Thanks for posting this.

[@joelfregoso8346]

Thank you for the precious time you invested into making your videos. The way you explain and detail symptoms and causes and the steps to take really make a huge difference towards good. Thank you again, and may you increase all the more in success and good wealth, amen 🙏.

[@spang650]

Very good explanation on how crankshaft position sensor works. Thank you!

[@COMMANDER-ONE]

You are a very good teacher. I completely understood everything you’ve explained. Just subscribed.

[@petermomo5119]

Excellent points, I always come to your channel because you have the skills, to help prevent me from paying these bills, 😅😅thanks again

[@fieldsofomagh]

Very informative diagnostic assessment.

[@paullafay4730]

I appreciate your help more then you'll ever know. You've helped me save thousands of dollars that I don't have I hope your doing well

[@dannypalmer7701]

Explaining is how we learn! Thanks!

[@2010invent]

Thank you for the detailed information. Very much appreciated. I just found your channel and I am subscribing.

[@MRNICK68]

Dude. THANK YOU this was my issue on my 2000 Malibu

[@brendanburress2696]

This video helped so much. Great explanation, definitely subscribing

[@franklynpertuz7669]

Thank you you help me solve a problem I couldn't solve for awhile and it's due to that they can look for a wire thank you your information was great and I'm very grateful for it excellent explanation

[@DeeCustoms]

Thanks for all your knowledge brother. It helped me so much to understand the issue on my Transit.

[@planetearthchannel3602]

You are good 👍 bro, thank you. Please if you have not done so already about all the senceres, please make more videos about each individual sencer how it works and exactly what it delivers. Also how to inspect them that they are faulty. Thank you very much and all respect to all honest people ❤

[@robinpesencie2981]

🇿🇦 Excellent presentation and easy to understand.

[@dariusstack]

Your video was helpful now I see why when crankshaft sensor is failing or just done it will trigger the 🚗 🖥 to strange things

[@likits1999]

Excellent explanation. Thanks maestro!!!

[@noriega211]

Great tutorial❤ thank you for sharing.

[@daking8282]

very nice video it explains everything!

[@perkpal]

Very informative video 😊I have a Suzuki tl1000r (vtwin) with No spark at the rear cylinder. I have changed plugs, coils, wires, checked connection to ecu for resistance, and continuity, the coils are getting 12v from the ecu. Only thing left is the crankshaft sensor, do you have any advice here? It still only fires on the front cylinder, so the sensor is good. How do I properly check the pickup/harmonic balancer?

[@henrychitambo171]

You are a grate tutorial, simple and straight on point thanks for your time

[@bakawolffskates]

learned far more than other videos taught. i've had 3 sensors go bad on me one completely failing. i'm wondering now if it's my harmonic balancer

[@gracec1665]

Wow!! Thank you for the visual aid!!

[@Ramon-xh4pb]

This guy is awesome! Keep it up.

[@ricgordon-Atix-]

thank you for using your time to explain this it was helpful much appreciated

[@robertotoledo1910]

I appreciate the content, and very well explained of the different possibilities, 👋✌️👍👍

[@sottilavong]

Excellent explanation!

[@yousaidwhaaaattt8631]

Quality information. Thank You.

[@dbkali1]

Great video. What if you have a new engine wiring, crankshaft position sensor and fuse box , but still getting P0339 code? What could be causing the issue? Also what is the name of the injector light tester you showed in your video? Thank you!

[@frankpearce2014]

This just fixed a thousand headaches

[@josephflores9306]

Awesome Info very great detail

[@EuwProch]

Holy moly described and explained to the “teeth”. Excelent video

[@user-lc5fi9dz2x]

Thanks a lot...it's so helpful

[@Outlaw1125]

Got my truck started thank you much

[@user-qb3cz5pp6r]

This Guy is Really Good !

[@daviduate6808]

Great tutorial..thank so much..❤..do more tutorial youre a blessings to d.i.y.guys..great video..

[@Jason-Jason]

excellent video

[@gasparmendoza943]

Very helpful thanks you

[@radjesbadrie6094]

thanks for the info very usefull

[@edgarmojica6145]

Great video 👍

[@sebaselleon4969]

need more videos like this 🎉

[@user-bi6nm3qb4j]

Is it possible that my car stalls sometimes without any fault sign on the dashboard and error code in memory due to faulty crankshaft position sensor? Thanks for great video!

[@capricornwon07]

Great video!

[@PoggyStyles-ii2lp]

Excellent put explain it very well cover all basis.

[@Sky_Power141]

Great job 👍

[@joenorthrup1005]

Great explanation

[@ephraimcamacho9600]

Thanks for the info!!

[@buckjohnson6656]

Mann you are so awesome 😎 you broke down to the last compound 🤗

[@curtcorder2013]

Thnx buddy..well explained..SA👍

[@kirbyglover3868]

Great video buds cool 😎

[@sottilavong]

Thank you!

[@pvel210662]

Thanks!

[@Sky_Power141]

Thank you ❤

[@RefabbiaAdha]

thank you!

[@skbenergy]

well explained

[@vhomotlatsi486]

Thank you

[@simoisereva4131]

Good day mate, I have a Holden captiva maxx 2007 model petrol, can you help me to locate camshaft position sensor bank 1.

[@peterstinton9361]

Thank you 🙏🇦🇺

[@MichaelRitchie-yl6jq]

Helpful

[@saifulardi1969]

you are the guru.. excellent

[@nevinkuser9892]

The plastic on mine looks super worn. Is there a recommended interval to change it? My car is a 2015 Toyota.

[@madmadmickhog]

brilliant Thx mate !!😄

[@DIABLO_4_Tester_Sacramento]

my 2011 chevy camaro SS does not start after refueling ONLY with Crankshaft position sensor fault code.... Any suggestions ?

[@jamesshank2601]

Does a mass air flow sensor need to be program after installed reason for check engine came on after I unhooked the air cleaner to install air filter then I started to get purge codes p0442 and p0455 now I have oil leak can't find where it's coming from

[@topadrenalina679]

hey my friend I have a question for you, I have a problem with nissan titan 2014 sometimes it starts and sometimes it wont alraeady replaced cam and crack sensors but is doing the same thing when it doesnt start I DONT have INYECCION PULSE IN ALL INYECTORS so my question is which sensor is resposible for telling the computer to fire the inyectors when cranking I HOPE YOU CAN HELP ME WITH SOME IDEAS THANKS MY FRIEND

[@gideonchabalamwewa3289]

Thanks bro

[@ambermay4098]

Will it show up on the reader as something different?😊

[@conmanumber1]

Hello from Oamaru, South island New Zealand. I have a 2012 Spanish built Nissan Navara D40 St-X Diesel pickup. Engine is a Nissan - Renault partnership common rail with 165.000 K.m on clock. When idling it's lumpy then when attempting to accelerate it farts n missis then dies. It smokes a really white Hazy putrid smoke but no oil in coolant nor coolant in sump. There's no fuel dilution in oil sump. It starts but struggle.. S.c.v, e.g.r cooler replaced (but didn't require so) injectors tested fine. E.g.r valve actuator works fine. Any idea what may cause this grief?... Crank n cam sensors?. Thanks again in advance..Carl

[@MikeJones-yd9kf]

How do you fix Code P2227 & P2228 despite replacing the MAP sensor on a 2016 Chevy Cruze LT with 1.4 Engine? Thank you

[@link560633]

I have an issue with my dodge ram 07 it stalls when I'm coming to a stop at light or sign.

[@cookinitmax]

Cool thanks!! So I bought a Dodge Ram 2005 hemi 82 thousand miles it likes to stall out in the morning when taking off from a stop sign or backing out in the morning after warm up. My buddy who's has past said its done this since he owned the truck I'm the new owner what worries me they could never figure it out. I'm worried that this could be very dangerous if he took it to a dealership and they couldn't figure it out I might be left trying to figure it out my self . Man what you say sounds so it . I'm so sick of mechanics who charge a huge fee . I just got the plugs done 16 plugs $598 bucks no wires no coils just plugs. So with that said do I have to reset the new crank sensor when installing it back in and if so what needs to be done to do it in order for it to start correctly?

[@noeolvera3770]

Thanks for help but hard to reach as might as well change it instead of messing with it and shaking it like you said when it takes time to reach no 1 had time for rhat

[@davidgrant668]

Hi will the code p0349 no signal still be crankshaft sensor even though it comes up with camshaft sensor 2 no signal

[@hamadali5062]

Thank you very much sir. Very useful video

[@ronr5194]

If my car idles ok but sputters bad when the car is put into gear, reverse or drive (auto trans) could that be a sign of a bad crank sensor?

[@mrbossftw2739]

When the middle of the flexplate breaks… could it cause the ring to hit the sensor and become damaged?

[@JohnBusa1981]

Can this apply the same to motorcycle like Hayabusa Gen 3? My bike fall on the left side where the stator housing got cracked. The CKP sensor was in the stator housing...After the incident, when I was riding my bike I feel someone was pressing the brake....the bike got lagged but it was still able to ride like normal. I went to installed Brembo Brake and clutch MC....this is where things got worst. The bike will bog, unstable accelerations and stall. At traffic lights(stationary) the engine will get very hot and stall. You have cool it down for 15mins and the bike is able to start. As it accelerates again it will feel like something is pressing the brake, lag and stall. The rpm is unstable and check engine and fi sign appears. Can this be the CKP sensor faulty?

[@retiredsnowbunnyhunterx5106]

Interesting I just replaced my crankshaft position sensor like literally yesterday.

[@eliesarjaimes]

Exelente

[@dollyregvel5706]

Hello dear! Can you explain why my electrical gadgets are not working along with crankshaft issue that was detected by the ECU system. Im replacing the crankshaft for now but electrical problems still exist... I recently changed the battery 3 months ago. Could it be something else? Your advice would be of great value 🙏🙏😊

[@issahzakaria334]

Thank you for good teachings. Did you write any book?

[@Top5AutoRepairs]

I used to.

[@naughtymaster16]

On my Honda Jazz In last 5 months I have to change the crank shaft position sensor three times. Twice car stalled on highway soon after the engine light popped up. Third time I changed the genuine one from the dealer. But still while driving I feel loss of power occasionally 😮.

[@kenmyers1324]

Thanks

[@John-nl4lt]

Thank you sir 👍🇦🇺

[@John-nl4lt]

My bros ls is doing exactly that and by chance you popped into my life I’ll check some more of your vids. Very clearly explained. Cheers John. 😁🇦🇺

[@robertcarlos78]

Where is your shop at

[@ascension4444]

I'm trying this next, my civic has been misfiring for a year and at times goes into limp mode, when I restart it it's not in limp mode temporarily. I've replaced many coil packs, fuel pumps, spark plugs, VVT solenoid, EGR valve, Throttle Body, PCV valve, I'm thinking maybe the crank sensor is weak , or cam sensor, or MAP sensor? Idk but I've had it with this war. It's stuck home in the garage.

[@zurn56]

I have an old Jeep WJ. Iver replaced just about every sensor but the crank shaft position sensor. Every time I change a sensor, it helpped, but I think it is the crank shaft sensor.

[@elchinlatifov9086]

i have w205 2.0 Engine 7G tronic. I have problem with not comfortable shifting to 2 and 2 to 3. At the moment of shifting, it feels like car stops for milliseconds and accelerate again. Do you think this can be due to crankshaft sensor?

[@erichaakenson5741]

Greetings, I own a 1993 C3500 7.4 Truck & I cannot locate the crankshaft Position Sensor (CKG). I've seen references of between Harmonic Balancer & Timing Cover, in the Block above the oil pan, back of the block, or inside the Distributor. I've looked carefully, no loom wires, no port in timing cover, & I replaced the OEM Distributor with new OEM unit. Vehicle timing set to 4 degrees before TDC. Verified all spark plug & fuel inj. Vehicle starts, stalls, back fires.

[@yodaddyjonny94]

So I replaced mine and it didn't help any on my 2008 honda accord. It didn't help it got worse. So I put the old one back in and then had it relearned. It worked for like a week. Then went back to limp mode. It's probably my wiring wouldn't you say? If the censor was bad it wouldn't of worked for that week I'd think

[@donjohnmx]

So my car turns on but sometimes will turn back off after turning it on. Google says it might be the crankshaft sensor? Any thoughts?

[@familienmitic6623]

awesome !

[@Charlie220966]

I have Peugeot 407 SW 1.6 HDi SC. I can find speed sensor on crankshaft, but where is position sensor? Sorry, maybe stupid question 😊

[@jeffreydembowski2593]

Where is it located on 2001 Cadillac El Dorado.

[@bhekaninjilo2165]

Hi what happened when the cutting petrol when is running and show engene light then started misfiring

[@guscruz5076]

Hi my 2006 sienna has a P0016 Code cam and crank out of correlation but no bad symptoms it turns on without hesitation and engine runs steady the problem started when i took it to a mechanic for a p00300 multiple misfire issue and he said it was a bent valve be removed the head on bank 2 and when i got the van back it had that new code P0016 i took it back he the took cam gear pully off and basically he couldnt figure it out. What can it be?? I benn driving it for a year everyfay like this.

[@bombaybeats215]

Im remember learning this in school.

[@musicfashionstyle9269]

How do i know my crankshaft position sensor is bad or still good.

[@BryanG830]

I have a p0340 code. Already replaced the camshaft sensor. And the code is still there and the car still won't start. My battery keeps getting shorted out and the fuel pump and fuel injectors are off. So now I think I know what the problem is. The wiring harness to the camshaft position. I already bought the new wires and connectors I just don't know how to swap it out because I don't know nothing about electrical work. It doesn't say nothing about a crankshaft sensor or crankshaft wiring harness. But I still want to replace it because I think the crankshaft sensor and the camshaft sensor work together. I just hope that if I replaced the connector seen the wires that I can start my car because the fuel pump is off and I can't start my car. But if there's an open circuit due to bad wiring then that would make sense but I just need to know that if I replace the wires will my car start that's all I want to know

[@therealspixycat]

The car will suddenly stall with first loosing power or misfires? There was no indication that a stall is imminent? Will the ecu always through a fault code when the crank positioning sensor gives unexpected data?