2004 Mitsubishi Endeavour starter

[@juanee2]

I did this job after watching your video, it took me about an hour and a half (got up at 6 am, finished by 7:30 am)... I took my time, no hurry. Tips for everyone: I did NOT need to lift the SUV or use jack stands. Also, the starter shield, after taking the 2 bolts and 2 screws off, just push it slightly to the side (toward the front) and UP out of the way, leaving it in there. (I could not pull it DOWN and out). Also, remember to disconnect the battery, wear nitrile disposable shop gloves and wear safety glasses , especially when you are laying down taking the starter off, lost of dirt and oil down there to fall in your eyes. Thank you Tyler 👍, your video is much appreciated and gave me the confidence I could do it with a basic toolbox, an old Craftsman 150 piece set (only metric sockets needed for this), and a few socket extensions.

[@taylorjs2534]

Excellent... I will replace mine this week. Same symptoms. I am sure I'd have struggled with that second bolt if I hadn't seen this first!

[@taylorjs2534]

Finished the job this morning... thanks for making it easy.

[@marc54678]

I changed this in a school parking lot, using your excellent video. Thanks for documenting the socket sizes and describing the sound of a failing starter.

[@jmodified]

Good job, you gave a better view of that hidden bolt than other videos. I replaced one of these five months ago (paid exactly the same as you did), and the rebuilt replacement is now failing. It's warrantied, but still a pain to do this again.

[@IllNanda]

bless you for this straight forward , easy to understand walkthrough

[@Golddude08]

Excellent video, great demonstration of bolts and plate

[@davidgilbert5540]

Thx to you, I found my starter cover, 2 bolts and 2 nuts. I took off the cover.

[@bensutherland6871]

Thanks mine just went out this evening I had the same symptoms as yours so thanks for mentioning that great video

[@Ocean_ashes]

Thank you! This was exactly the information I needed. Clear and concise. I’ve done it on older domestics but I’ve never worked on any kind of import before. ❤

[@howardarmstead4246]

Great job on the video. Same thing is happened to my Endevor. Now I know how to fix it. Thanks

[@eddiegainey]

Thanks for the tip. Changing mine tomorrow. Thought the battery was bad but it tested my better than new.

[@lajeanapeoples5294]

Thank you so mush this was alot of help

[@psychic840]

If it wasn't for this video I would not if been able locate starter or other bolt .thank you very much. Kevin

[@davidbeery2756]

Ty, that top bolt had me looking for a bit.

[@NWPencrawler]

Thanks for the vid. Gonna tackle this in a few days.

[@slammedshady]

Wow great video.. doing mine tomorrow

[@hirammendez6748]

Good Video, straight to the point!

[@mpakaguelo]

Thank you for your video it helps me to change mine.

[@keithbrookshire]

Thanks for this information. I had a hard time finding II bolt. After I took the plastic apron down I was able to get the starter off. I'm sure it would have been easier had I not been doing it in a parking lot without the benefit of a Jack or jack stands.

[@tylerpittman6404]

I like to use a curb as a jack. Lol

[@gs1234579]

Very thoroughly explained thanks

[@isaotimothy1234]

Thank you that was a detail information

[@willf5768]

How many miles on the car and what is all the oil everywhere 😳

[@georgemunoz4794]

Do you still have that mitsubishi endeavor

[@SenpaiDonnelle]

Still on this you tube?

[@KidFrizMRFIXIT]

Thank you, big help

[@vlachobernal]

thank you. I need to do same job.where u get it x 100?

[@tylerpittman6404]

Advance Auto parts

[@williamhopper1443]

This wàs a lot help special the top bolt

[@2201652]

Thanks for second bolt dam I though was f...ked

[@brisciapittman5945]

Flip yo camera babe!

[@2MuchMoose]

Thanks for the video. It is very informative and I will be changing the starter on my endeavor today.