2005 - 2010 Hyundai Accent Automatic Transmission Speed Sensor Change

2010 Hyundai Accent Automatic Transmission Speed Sensor Change Third Generation 2005 - 2010 Model

[@jazzburks9974]

I wanted to add that you don't have to feel around if you take off the front driver side tire and the plastic shield behind it. The shield is held in place by 2 10mm bolts. Thanks for the great video!

[@donproper3632]

Great video thanks for no stupid stuff and music just a straightforward how to do it that's the way they all should be thanks a lot

[@roycauston6923]

Great Video Kenny....

[@nicolecato634]

Thank you. I'll get a mechanic to change it for me.

[@tatsumaru12345]

Theres also a speed sensor on the hub. Mine melted on Because of caliper failure, got hot. Basically broke it in half getting it off.

[@tuca_mote73]

My 2013 accent is starting to tug when I drive from 0-30 mph. Any idea what it can be ? No lights are on or flashing

[@youssryagaibey9968]

Is it tran’s temperature sensor or speed sensor?

[@kkc3009]

Vehicle speed sensor is a different sensor than this trans speed sensor right?

[@JTB128650]

Thank god. Was it two lines apart or two in one?

[@famo6225]

Hey can anyone help me plz I’m tryin to figure out what I exactly need a rat chewed threw some of the wires and I’m told it’s the wired that go from speed sensor to transmission and I keep trying to look it up but can’t find what I need any help would be appreciated it’s a 2009 Hyundai Accent gls 1.6L

[@myangl6]

Is that vss sensor? thanks alot

[@KBUlrich135]

Yes, it is the Vehicle Speed Sensor.

[@abukhairy2012]

Is it the same sensor for manual and automatic

[@luispichardo6704]

Nope. They are different.

[@noelsanchez1822]

Hi and thanks a lot for the video do you think is the same turbine speed sensor A circuit the code is p0717

[@KBUlrich135]

Noel Sanchez I don’t know. I didn’t use a code reader to diagnose the problem. Sorry I can’t help.

[@noelsanchez1822]

@@KBUlrich135 its ok i buy the part to give a try to see if is the same problem have good day and thanks again for the video help me to know were is the part and how to changed

[@jazzburks9974]

@@noelsanchez1822 , I had the code P0717 and it went away after I changed the part.

[@richthomas5996]

@@jazzburks9974 can you please help, I have a 2008 hyundai accent and im getting the code p0717 and every auto store is showing me a different sensor to buy or dont know what to look for or the code p0717 isn't showing up in their system, what sensor is it and were can I find it, its driving me crazy that I can't find the part I need to fix my car.

[@jazzburks9974]

@@richthomas5996 I bought the part at rockauto.com I used the Standard Motor Parts SC487 www.rockauto.com/?carcode=1433545&parttype=10634

[@77tomt]

Video is blank

[@sergioamaton9776]

You should show what the sensor looks like sir.

[@KBUlrich135]

My apologies. I had already installed the sensor when I decided that I should make a helpful KZbin video.

[@Kro_man_tx]

Did this fix your problem?

[@KBUlrich135]

Absolutely.

[@Kro_man_tx]

@@KBUlrich135 - awesome. I just bought one of these for my daughter. And all of a sudden today it wouldn't go into overdrive. And it feels like it is starting out in second gear. So I'm going to do a filter and transmission fluid change. But this sensor could be a problem as well.

[@77tomt]

Went blank when I turned m😢 phone. Ok now.