2005 - 2010 Jeep Grand Cherokee Radio Install

Parts used listed in the description below!
Watch a full tutorial as a 2008 Jeep Grand Cherokee will have a Pioneer double din bluetooth radio installed. This radio provides additional features including bluetooth, USB, backup camera compatibility, and an enhanced sound quality. We will be retaining the factory backup camera, premium Boston audio system, and steering wheel volume controls.
This video applies to Jeep Grand Cherokee models for years 2005, 2006, 2007, 2008, 2009, and 2010. This video also includes complete radio wiring and assembly, installation, and testing.
Click here to see the unboxing of the radio we used:
• Pioneer AVH-120BT Unbo...
Click here to see the Crux SWRCR-59 harness unboxing video:
• Crux Chrysler Jeep Dod...
Click here to see the amplifier and subwoofer install on this vehicle:
• 2005 - 2010 Jeep Grand...
Pioneer bypass video: • How Bypass The Video R...
Alpine bypass video: • How To Bypass Parking ...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used in this install (Amazon Associate / eBay Partner Paid Links):
*Pioneer AVH-120BT Double Din Radio: amzn.to/365sQY4
*Metra 95-6511 Double Din Dash Kit: amzn.to/3dngoab
--Use the Metra 99-6511 for Single Din Radios: amzn.to/3k69ytC
*Metra 40-EU10 Antenna Adapter: amzn.to/2UKAuop
*Crux SWRCR-59 Wiring Harness and Steering Wheel Control Adapter:
amzn.to/3hoiKqS
--If you don't have the steering wheel controls use the Crux SOOCR-26:
amzn.to/3h6bRvo
*To avoid any manual wiring for the factory backup camera, use this harness: amzn.to/40w69HQ
*(Optional) AUX/USB adapter: amzn.to/2SYXEGS
*(Optional) *Pioneer Parking Brake MicroBypass: ebay.us/RVf61w
*If you need the GPS Antenna Adapter for Alpine, JVC, or Kenwood, use the iDatalink ACC-NAV1: amzn.to/3lmTBi2
*If you need the GPS Antenna Adapter for Pioneer, use the iDatalink ACC-NAV2: amzn.to/3Ebe423
*If you need the XM Radio Antenna Adapter, use the iDatalink SAT1:
amzn.to/3z1Xqy0
Disclosure: As an Amazon Associate / eBay Partner, I earn from qualifying purchases

[@ProvoBeastAudio]

Parts used linked in the description of the video!

[@meganring1907]

Why don't I have sound to my radio ??

[@JohnSmithduh]

I got the same thing going on no sound im hooked up looked over everything 20 times

[@ProvoBeastAudio]

@@JohnSmithduh Your factory amplifier most likely isn't turning on. Ensure your blue / white wire on your harness is hooked up to the remote trigger wire of your radio.

[@JohnSmithduh]

@@ProvoBeastAudio i get it now it all goes through the swc module! I was wondering why there was also no switched power off the truck. Definitely a confusing one but i got it! Thanks for your help!!

[@lawrencer588]

What about with factory infotainment? Will this set up work?

[@jeepguy95]

Just FYI: With the older (2005-2007) WK Grand Cherokees, all you have to do to get access to the radio is pull out the surround around the factory radio, which also includes the vents. For some reason, in 2008, you had to remove the whole center console, as shown here. The process shown here will ALSO work for the 2008-2010 Jeep Commander XK. :)

[@amajorleagueinfidel1]

This was a great instructional video. I just installed a Pioneer into a 2007 JGC and couldn't have done it without this video. Thank you very much! Only issues were the dash kit, and antenna were not the correct ones. At least for the 2007 JGC Overland, you need the Metra 99-6510 Dash Kit and the Metra 40-CR10 Antenna Adapter.

[@rodneyaho1530]

Great information. Thanks!!!

[@idordonez]

Hello, thank you very much for your video. It was very useful for me. I would like to ask you if the camera resolution is good or if it is better to change it as well.

[@rickbren7]

Great video. I just installed an aftermarket stereo in my 2007 Grand Cherokee, replacing the NAV system. Everything works fine, except I can't get the factory reverse camera to work as the stereo loses power when i shift into reverse. Any suggestions?

[@pakogonzalez3051]

Hi dear I look at your videos and they are very interesting and very helpful! I have a question? I have a jeep cherokee and I have never been able to make my overhead dvd player work with my pioneer stereo do you think there is a solution to make it work

[@bradrose7809]

Thanks for this, been waiting, looking, researching, pricing. I work on heavy equipment and did not want to mess mine up. I am going for it.

[@bradrose7809]

So I did this install on mine same car late last night, radio crux I used your parts list. I need to add rca and a radio Antenna everything worked perfect but for some reason I am confused on the satellite radio and the navigation radio adapter plugs that I need I am not seeing what I need on your list?

[@user-fp3oi4cc1e]

Do I use the blue and white wire from the harness for the module

[@TheHortond]

Can you retain the rear entertainment system if you upgrade the front deck?

[@jvar8057]

I got a 2010 Jeep wk and I got 7” a car dual radio system and the rear end of the radio is a little shorter so still use the big brackets dash kit?

[@jupabeco]

Hi, the proximity sensor sound is integrated with the radio right? Is still working with this upgrade?

[@user-fp3oi4cc1e]

I followed everything I have no power to radio . And you used an extra blue remote wire where do I hook that up at and am I using the blue white wire from the crux adapter

[@JasonHolmes-vj9bu]

If you want to bypass the factory can you still use the steering wheel module?

[@zlatidimitrov]

I followed the video. Works great except one thing - the Pioneer doesn't start on pre-contact of the key. So when I am in the car and waiting for someone, I cannot listen to music, except if I put the key to contact (acc), but starts so many systems and wait the car to startup... Am I missing something?

[@afbrias]

Will all of this Pioneer hardware work on a Pioneer DMH-1770NEX in a 2010 Jeep Grand Cherokee SRT8 with the factory speakers, parking aid, security system and steering wheel controls?

[@user-fp3oi4cc1e]

Where did you hook up that extra power wire to

[@lildazer303]

does the backup sensor still work

[@donvergas7771]

Nice 👍🏻

[@chase33370]

At 5:22 are you talking about amps for bass or sum else

[@cammedchico7876]

My crux unit stays on for some reason even after wiring everything wire for wire

[@michaelmcdonald5385]

Essentially, you leave the amp plug behind the radio unplugged then, and run the white/yellow off the 3.5 for a garbage radio that doesn’t have a jack, but has a hardwire 6 pin swc retention for this, right? Tried with pac and realized I either have to run a bypass and a better amp, or literally just have tweeters and nothing else…or try this.

[@alexanderbrown427]

For wiring the SWC (amplified) which wires get connected from vehicle to KEY1, KEY,2 ?

[@tobyhorath8284]

Im going to be trying this today. I found the swc wire and im gonna try to tap into it. I will let you kow if i have success.

[@wendiwood7407]

Any idea what color the steering wheel wore is in the steering column? We’re trying to hook up a stereo and retain the buttons on a 2005 grand Cherokee and the controls won’t work. Have to wire it directly to the wheel control wire but cannot find a diagram anywhere showing what color is correct for my year.

[@G6.1]

You gotta buy an adaptor head over to crutchfield they’ll show you which one you need for you’re specific vehicle.

[@tomainsley]

What effect will this have on the VES, will the DVD player still work, I’m looking at doing this upgrade?

[@TheHortond]

I also would like to know this?

[@alejandroll_84]

hi ! Do you know what model of any pioneer radio with apple carplay is compatible xon grand cherokee overland year 2009? Thanks for your help

[@ProvoBeastAudio]

Here you go! amzn.to/3PX2due

[@PeterPan-vd9vh]

😍

[@timothykoar6265]

Thank you so much for your videos. They are really well done. I have this exact vehicle and I am planning on installing a rockford fosgate p300-12 soon. Do I have to use an aftermarket radio if I want to hook this sub to my jeep? I actually like the stock radio they provided, and if possible I’d like to just connect the sub to that unit. Please let me know if this is possible, and thanks again!

[@ProvoBeastAudio]

You can keep the factory radio, yes. Just a line out converter is needed for your install, like this one: amzn.to/33lRh5u

[@timothykoar6265]

@@ProvoBeastAudio nice thank for the rec man. I’m pretty. Lear on the concept of what I have to do, but I’m a little concerned about stripping the wires on the head unit. Is there some description of which wire does what in the owners manual maybe? I get that I need to get the signal from the radio/amp/speaker, but I’m not sure how to identify which wires to connect to the LOC. sorry for the long message

[@chriscollins687]

Hi there. Whereabouts is the ground wire connected to the car body? I think mine isn't grounded properly. Thanks.

[@ProvoBeastAudio]

It generally connects to the dash support bracket. If you have grounding issues, just wire your radio to the dash support metal bracket directly with a ring terminal.

[@apexit]

is the picture quality better now with the backup camera or is there a direct upgrade for that too? i just want a better view backing up at night

[@ProvoBeastAudio]

resolution is slightly better yes, but the camera is still pretty terrible. you could try and retrofit another camera in the same housing, but no direct replacements out there.

[@heathermacgillivray1689]

I have a 2008 GJ diesel with factory amp. Installed Pioneer AVH 240 EX Everything set up as per instructions, but no souhd. Also SWC doesn't fit. the factory cable. Factory cable has same outlet as the antenna cable. Any ideas? Thanks

[@georgebecker5726]

Did you get the audio interface? The one for this jeep is pretty cheap

[@georgebecker5726]

Without the interface sound won't wprk. I have the scosche cr4000sw but it may be a different one for diesel. Not sure.

[@AwesomationGames]

How did you cut out the center plastic piece at 12:00 ?

[@ProvoBeastAudio]

Oscillating Multi Tool: amzn.to/43VUPp1

[@ttocsmij]

The Jeep RER radio you replaced has built-in navigation maps and GPS / Sirius antennas. I heard the latter mentioned (but not much detail) and the former not mentioned at all. Does the Pioneer unit have built-in navigation maps or does one have to hook up a cell phone?

[@ProvoBeastAudio]

All depends on the radio you install. This Pioneer is your entry level pioneer, so no. However there are many options on the market with Android Auto / Apple Carplay or even native nav in the unit for a higher cost.

[@neonnoodle1169]

Overall, excellent video but should’ve spent less time showing soldering wires and a bit more time on one of the most significant parts of this install which is cutting that support bracket out. Is that bracket metal or plastic? How did you go about cutting it and with what tool?

[@ProvoBeastAudio]

Plastic, and a multi tool. Some people use a saw. Whatever works.

[@Pairofrickowens]

So I have the amplified version in the harness connector you showed it said “not used” on certain lines does that mean the harness ONLY amplifies the 3.5 dash speakers and the door 6x9’s? Not the rear 6.5s?

[@michaelmcdonald5385]

No, the fade front/rear is controlled by the canbus system for Bluetooth calls/etc, so the factory amp only takes in 1 L/1 R signal and distributes to all 4 ch after. (Phone calls mute the back doors). Quite irritating setup.

[@Pairofrickowens]

@@michaelmcdonald5385 very irritating, I’m half convinced to just just throw the amp out and run new speaker wire to all of them when I get a new head unit

[@michaelmcdonald5385]

@@Pairofrickowens need a bypass harness to do it (plug in at the amp, run all the way back up). That’s my current debate with my girlfriend’s Christmas gift and the cheap SJoyBring head unit she bought. Got everything in nice and neat, now realizing pac swc module/harness won’t work, while everything is back together and good, except only have tweeters and some loud ass bass, no doors. 😂 Less you feel like running from the head unit. Guess either way works if it’s apart.

[@Pairofrickowens]

@@michaelmcdonald5385 I feel you, it’s a terrible system and there’s barely any after market for the WK jeeps so I have to scour the internet for any advice on amplified jeeps

[@deathwobblewagon341]

Would this one work for a 2007 Grand Cherokee with the optional Boston Acoustics audio system?

[@ProvoBeastAudio]

That is the identical vehicle in this video. All parts used in the description of the video.

[@gregrhodus8121]

@@ProvoBeastAudio what about 2008 with the boston acoustics system? also does the boston acoustics system have built in amp?

[@dm260]

@@gregrhodus8121 Yes, it does. I have a 2008 Jeep Grand Cherokee Limited with Boston Acoustics.

[@CylerOrr-fs6iw]

How can i tell if i have a factory amplifier or not?

[@ProvoBeastAudio]

A few ways, usually you will see the Boston Acoustics logo in the vehicle, or anything like a factory subwoofer are a few easy ways to check.

[@luisespinoza7097]

I installed this in my F450 but my Bluetooth icon won't stays gray. What did I do wrong? Thanks in advance

[@ProvoBeastAudio]

If you used a Pioneer, it has to do with the green parking brake wire which needs to either be connected to the parking brake ground wire, or with use of a bypass to unlock those settings.

[@maxalonsopinzon4138]

Hi, my car came just with the base radio, not amplified, doesn't have steering controls. Do I need to buy the crux module anyway? Thank you

[@ProvoBeastAudio]

You still need a smart harness, yes. But you can go with the base harness by Axxess since you don't have a factory amp or steering wheel volume controls: amzn.to/3PTBaAW

[@maxalonsopinzon4138]

​@@ProvoBeastAudiothank you very much, I ended up ordering the one that Crux SWR-CR59. Does that one works ok? Even if I have the base radio. I don't want to start dissasemblying if I don't have the right part. Thanks in advance

[@BloodSweatnBass]

So in this video is an amp bypass install. Which is linkied from a video with an amp install but no mention of how to wire the amp itself so i watched two videos with no answers 💁🏽‍♂️

[@tonymurray758]

a few of these parts don't fit my 2007 JGC. might want to update to 2008-2010. The kit was too small and the antenna adapter was wrong FYI.

[@DHILLA-yz4rx]

Any update? Did you find something that fits I have 07 as well

[@tonymurray758]

@@DHILLA-yz4rx Amazon is pretty good about matching to your vehicle if you put it in. That's what I did now kit is good and antenna too. . .

[@DHILLA-yz4rx]

@@tonymurray758 what did you get

[@iangassman625]

How many labor "hours" did this take you to modify and install? At an estimate, how much do you think doing this would cost if I took it to a car audio installer? Thanks!

[@ProvoBeastAudio]

This took about 3 hours man hours. Shop rates can vary between 50-300 an hour, and you get what you pay for. Most shops wont install your own equipment, and will only install equipment they sell. You will just have to call around.

[@iangassman625]

@@ProvoBeastAudio Thanks!

[@bronbess7388]

Where can I get some remote turn on wire also you should have added that and the wire wrap in the description

[@ProvoBeastAudio]

Any auto parts store will have general stranded automotive wire (18 gauge is fine). We use Tesa Tape: amzn.to/3nb5Kt1

[@ProvoBeastAudio]

Here is some 18 Gauge wire: amzn.to/3dft1Ez

[@tobyhorath8284]

How did you get the power to the backup camera?

[@ProvoBeastAudio]

It's powered separately, we just pulled the video signal for our new radio.

[@tobyhorath8284]

@@ProvoBeastAudio Thanks! Mine will not work hooked up like yours. Also, how did you maintain steering wheel controls?

[@georgebecker5726]

I can't get a regular sized double din to fit in the opening on mine, I have an 08 grand cherokee Laredo 3.7l Nothing fancy like the one in the video, but seems like there's something back there blocking me from pushing the stereo all the way in

[@ProvoBeastAudio]

You may have to cut a part of the subdash

[@AwesomationGames]

@@ProvoBeastAudio what do you cut it with? It’s very thick plastic lol

[@AwesomationGames]

Same car and same issue here, were you able to cut it out

[@ProvoBeastAudio]

@@AwesomationGames We used an oscillating multi-tool

[@dallasill0]

I have used other, and i lost the language of the console. Now i cant change from german.. If i try to switch to other language German come back. With that SWrcr happens too?¿?¿¿? I have Grand Cherokee 2007 CRC

[@ProvoBeastAudio]

Try doing a factory reset.

[@gsantosphoto]

@@ProvoBeastAudio do you know how can I do it???

[@ProvoBeastAudio]

@@gsantosphoto Depends on the radio.

[@jimmyjazz_]

What Is The Parking Brake Wire For 12:21

[@ProvoBeastAudio]

For video playback while parked as well as availability to addition options in settings menu of the radio. Alternatively you can use a microbypass

[@jimmyjazz_]

@@ProvoBeastAudio So My Parking Will Work Without The Parking Brake Bypass??

[@ProvoBeastAudio]

@@jimmyjazz_ I'm not sure what you mean. Your radio will work with the bypass hooked up, correct. You may not have all features enabled though.

[@user-fp3oi4cc1e]

Where did you hook up that extra power wire to