2004 - 2020 Ford F150 Axles, Wheel Bearings and IWE's replacement! kzbin.info/www/bejne/lYnTmWytasiIg7M Fuse 27 Relocation Walk-Through! kzbin.info/www/bejne/kJWToGqOq6dsrKM *NEW* Ford F-150 Spark Plug Replacement! kzbin.info/www/bejne/jmHTnmqKh62Ca9E The ULTIMATE Ford Drum Brake Replacement! kzbin.info/www/bejne/Z2K6cmCraJqibMk Here is how you revive 27 year old bolts… kzbin.info/www/bejne/nXvPqqOwmtqDhsU Can you clean your engine with Tire Foam? Check this out... kzbin.info/www/bejne/qF68fnqIndl-qbM Let us know what you think below!
@fallengodlingx66168 ай бұрын
I came for a how to on how to replace my speakers. I got exactly what I asked for. With great explanation and clarity with step by step instructions that make sense. I am absolutely blown away. This can’t be a legit KZbin video.
@TrickShiftGarage8 ай бұрын
Hey thank you so much for the kind words! We really appreciate the support! 🤟
@BeauKnowsMultifamily Жыл бұрын
Just did this on both door panels on my truck and never could’ve done it without your instruction. Thank you for making this video.
@TrickShiftGarage Жыл бұрын
Thanks for watching Beau! 🤟
@HomeInspectorTim Жыл бұрын
Thank you for the Video, def helped me. If you're watching this and swapping out your speakers.. you can press the tabs on the backside of the door handle and let it fall away from the door card, then rotate the handle/cable and let it pull thru the door card without fussing with the cable or risk breaking brittle plastic. Good Luck!
@TrickShiftGarage Жыл бұрын
Awesome, thanks Tim!
@jordandunagan87702 күн бұрын
Great video man. Hilarious end roll 😆. First time I've ever subscribed to anything 👍 thanks a lot.
@TrickShiftGarage2 күн бұрын
Hey thanks man! We really appreciate the support! I was fighting that cable for wayyyy too long lol.
@canderful8703 Жыл бұрын
You don’t have to take the door handle wire off. Push those two tabs on the side of the whole handle assembly in and it comes out. Much easier to remove and install the panel again
@TrickShiftGarage Жыл бұрын
Where were you when I was struggling? Lol, thanks for the information Canderful. And thanks for watching! 🤟
@davidemmons4614 Жыл бұрын
Man THANK YOU!!! I was just about to freaking slit my wrist... Seriously the best way.
@TrickShiftGarage Жыл бұрын
I was the same way David!
@FCCFox Жыл бұрын
Thanx for the video, had a blown speaker driving me nuts, didn't wanna pay through the nose for a shop to do it. Everything worked, but NONE if it was as easy as you made it seem, except for the out takes. Scraped my finger, couldn't get the door lock to go in right at first, no room, couldn't see the stupid wire harnesses, etc. In the end though I have 4 new Kenwood speakers for $150 and the truck sounds great.
@TrickShiftGarage Жыл бұрын
Lol yea that door lock just wanted to fight. Glad you got it all fixed and saved some money CFox! And thanks for watching! 🤟
@Cole_mac2 ай бұрын
Thanks! Exactly what I needed
@TrickShiftGarage2 ай бұрын
I'm glad it helped! Let me know how it goes brother!
@TheTech93 ай бұрын
What a great explanation!
@TrickShiftGarage3 ай бұрын
Thanks for watching! 🤟
@calabub456 Жыл бұрын
Thank you my brother I appreciate you
@TrickShiftGarage Жыл бұрын
Anytime, thanks for watching and taking the time to leave a comment! 🤟
@AZHOUSEOFCARDS8 ай бұрын
Great instructional video. Thanks!!
@TrickShiftGarage8 ай бұрын
Thanks for watching and taking the time to leave a comment! 🤟
@jamesbennett84026 ай бұрын
I had the SAME issue with the knobby thing on the door cable. Thought I was going to lose my mind
@TrickShiftGarage6 ай бұрын
Lol it tries to make things more difficult for us! 🤣
@jma06122 жыл бұрын
God u made this look way too easy I’m raging over here
@TrickShiftGarage2 жыл бұрын
Lol it took me a little while to figure out how the door panel fit on the door.
@juanmartinez-jd3eq10 ай бұрын
Thanks brother
@TrickShiftGarage10 ай бұрын
Anytime! 🤟
@monteseddy634 ай бұрын
👍good job
@TrickShiftGarage4 ай бұрын
Thanks for watching and taking the time to comment! 🤟
@corwinclark3267 Жыл бұрын
recommend a specific speaker for the upgrade?
@TrickShiftGarage Жыл бұрын
Hello Corwin! Honestly, speakers have come a long way since the 90's, that just about any brand would be fine if you are looking for a replacement. If I was to buy new speakers, I would avoid the lowest cost options and find a brand that's well known (like Pioneer, Kenwood, etc.). Thanks for watching! 🤟
@STINKYxPINKIEx5 ай бұрын
my issue resides from the cords that connect to the speaker how can i accsess the cords in that black connector part of the door and re wire it ? cause my audio works on my speaker if the door is open but not when its closed
@yairsandoval6297 Жыл бұрын
Hey man this was the best video but does this go for any new speakers
@TrickShiftGarage Жыл бұрын
I just showed you how to replace the factory speakers. Aftermarket speakers may need some custom wiring. I'm not 100% certain of that yet, but just be ready for it.
@aspectpyr03698 ай бұрын
Don’t know if you will respond but what speaker size are they if you happen to know I’m having trouble finding the measurements
@TrickShiftGarage8 ай бұрын
It looks like these speakers are a 6X8.
@aspectpyr03698 ай бұрын
@@TrickShiftGarage thank you I appreciate it
@jesse_m.grosso2378 Жыл бұрын
Is the electrical connector for the speaker a universal one? Meaning you can replace with any speaker?
@TrickShiftGarage Жыл бұрын
I don't believe so. But, if you go to crutchfield.com you will be able to find speakers that work perfectly with your truck. Thanks for watching! 🤟
@jesse_m.grosso2378 Жыл бұрын
@@TrickShiftGarage yea that’s a great site. Thanks for the vids. Super helpful for working on my 12th gen
@TrickShiftGarage Жыл бұрын
Anytime! Let us know if you need help with anything else! 👍
@monteseddy634 ай бұрын
👍
@jayboone3642 Жыл бұрын
Thanks can we do a rear install too lol
@TrickShiftGarage Жыл бұрын
I'll definitely look into it this weekend!
@eazy_e.7153 Жыл бұрын
I swear this truck has so many stupid petty issues lol, radio went out, speakers, Coolant leak from the plastic Y connector lmao, indicator switch went out (wipers always stayed on). Power train is all that’s good haha at least it’s easy to work on
@TrickShiftGarage Жыл бұрын
Lol that's what I always tell people. There are so many little things that will annoy the hell out of you, but these trucks will run for a long time.
@eazy_e.7153 Жыл бұрын
@@TrickShiftGarage oh yea to this day the 5.0 for me has taken the most abuse and still runs smoother at 170k compared to some newer trucks I’ve been in. Even though one of the coil hold down bolts is still broken from a plug change😂.
@TrickShiftGarage Жыл бұрын
Yea same here! This summer I'm going to do videos on valve cover replacements because one of mine is also broke. Ford puts coil covers on the Mustang, but left them off of the F150. Just another boneheaded decision.
@eazy_e.7153 Жыл бұрын
@@TrickShiftGarage yea it’s funny how stupid some of the stuff gets, but it just keeps on running so oh well. Nice video tho! My right side speaker just went out today so there’s a new project lol. Gotta find an aftermarket one with that same adapter, I’m hoping not to do any wiring.
@TrickShiftGarage Жыл бұрын
Thanks man! Let us know how it goes! If you can find one with the same adapter, let me know so I can add it to the description of this video for other people too!
@Stress78206 ай бұрын
The hardest part about this job was putting the tools back😅