2005 Ford Escape Misfire Fix 3.0 V6

This 05 ford escape 3.0L V6 had a misfire ,was running very rough. I scanned the computer but did not show any misfire codes even though there was a obvious misfire problem.
Turned out to be a misfire from the back cylinder head under the intake manifold, this video will show intake removal and what i did to isolate the misfire fix it.
Hope this video helps, be sure to Like amd Subscribe! Thank you for watching FixItPhillip!
With FixItPhillip, You can fix it!

[@SouthMainAuto]

Just subbed! Looking forward to new content and wishing you the best of luck! Love the videos so far man! :D

[@FixItPhillip]

Thank you Eric! That means allot to me brotha. See you next w.u.w

[@FixItPhillip]

I added this to my channel description. "Another Great Mechanic who has great videos is Eric O. From south main auto, check him out too! Be sure to Subscribe to his channel also!" kzbin.info/door/tAGzm9e_liY7ko1PBhzTHA

[@orenbendayan238]

Thank you for making this video. Gave me the confidence I needed to do this job. Great step by step instruction. Not only did I fix my car I fixed my wife's car as well. So. Thank you from the whole family. Keep up the good work.

[@FixItPhillip]

Thank you!

[@xibitpimp]

Thank you for this video! I watched it several times to get familiar before attempting working on my 2006 Mazda Tribute. Then I played it back step by step as I followed along. Then just to make sure, I rewatched to see that everything went back together the right way. Much appreciation for your details and editing to put this together.

[@merlindadimille599]

Hi! I'm from St. Lucia in the Caribbean. Thank You for being so detailed. It took me a while to find it but I'm glad that I did. Also I watched a few from South Main Auto and so far I can most definitely say that you two are the best. Keep up the good work. Looking forward for more regarding Ford Escape.

[@AdamGillrie]

Really great video. Helpful, to the point, cut well, no long winded stories. Awesome. 5 stars. Thanks!

[@kca2671]

Great job explaining in detail and showing everything you did. I just changed the plugs with another video, but yours is so much better and accurate. Now I have to go back in with your idea on the coils. Thanks.

[@debfassbinder9283]

THANK YOU FOR TAKING YOUR TIME TO CREATE THE VERY INFORMATIVE VIDEO, PHILLIP

[@jpnorris5]

on the 2003 you can actually disconnect 1,2,3 coil packs while running, its tight but can be done. #1 appears to be my culprit. great vid helped me as far as coil packs and no check eng light.

[@duggasNJ]

Phillip, I just subscribed. The things you showed such as unplugging the coils to test them was very helpful. I knew you could unplug spark plugs on older cars but wasn't sure about these more modern systems. Learning little details and short-cut type of things is important. Well done sir - I will share your info as well.

[@FixItPhillip]

Thank you, I'm happy you liked the video!

[@TimTuts]

I found your channel from watching South Main Auto and you had advertised it. Subscribed! I look forward to being your number 1 fan! KEep up the good work!

[@FixItPhillip]

Thank you. Much appreciated

[@roblyt41]

Great video. Very helpful. I did this last night. The detail you provided gave me confidence to do this myself instead of paying $100s to a local shop. After putting everything back together, the car started right up and ran like it's supposed to. The check engine light came back on after a few minutes though. The error was for the throttle sensor. I found the connector wasn't secure...my fault. Thank goodness I purchased a code scanner the day before! All good now.

[@FixItPhillip]

Good job

[@jd-kv9in]

Same here! Looking forward to watching your past and future vids.

[@FixItPhillip]

Thank you! Hope you like them!

[@cornfedful]

Thank you so much. Great little tips and tricks. I'm off to my garage. My 2002 Escape thanks you, also.

[@joelpelton7027]

Great video! Very helpful!

[@colinj402]

same again ! Hi from England, watched a couple of your vids and enjoyed, keep up the good work,

[@FixItPhillip]

Thank you very much, be sure to Subscribe! Much appreciated

[@disneydorks6396]

Hi Phillip, Just found your channel! Great job on the work and describing every step! I'm now Subscribed and Thumbs Up!

[@FixItPhillip]

Thank you very much

[@justincloncs1116]

Great information on video thanks man

[@bud3169]

Sir u r very good at mechanical guide and work thank u

[@bud3169]

P.s not bad for a hair lip...jk! ty.

[@whiteboy12911]

Great job I got to do the same thing

[@RickyPisano]

I have a 2005 500 Limited with the 3.0L Duratec DOHC V-6. Has that cross brace and upper motor mount. Also an electronic throttle body. Other than that looks about the same. Bank 1 is a real PITA to access. Thanks!!

[@gerardoroiz6449]

Really nice video now i can ckeck mine thnaks buddy¡¡

[@MrConspark]

Good test method, but please engine off whilst changing the coil out, may stop ECU coil driver failure. I have the same fault on a 2001 V6 ATM. Found 5/6 could had cracks in the potting on top near the connector, so changing all 6. Great video.

[@wdavis1976wd]

Trying to get mine fixed mine's an '05 mariner. Don't know what that wire is that the connectors come off of and connects to the boot.

[@midcoasttractorservice9182]

My 01 v6 only runs like crap when it is cold and below 1000 rpm. If you give it a little throttle it clears up so i'm thinking lower intake gasket? Once it reaches operating temp the rough idle goes away but i do have a cylinder 1 misfire code.

[@kevinhenry1681]

This is great...thanks Phillip! This is exactly happening to my 2005 Escape now. The mechanic quoted ~$1k to fix the 3rd cylinder. Majority of that cost is taking off the top which you demonstrated. I'm debating whether I should do it myself. Question...how long did it take you to complete the project?

[@FixItPhillip]

Its approx a 3 hr job total

[@AllAmericanGuyExpert]

Philip, I got a problem. Mine is either the PCM or the wiring harness to it. I've also got the cluster throwing communication codes and doing self-tests while driving, lol. It will send the speedometer and tach up to max swing and go back down when you hit the brakes and crazy stuff like that. At least mine is cylinder 5 and 6. I wiggled the PCM connector and the idle speed reacted positively for a second. Ever mess with that big bundle of wires?

[@MrAquinas1]

PCMs are very reliable. But the failure rates are pretty high with this car and engine. So don't be shocked if it happens. It happened to me. One cylinder was misfiring. Changed all plugs and coils. Same misfire until I changed the pcm.

[@kevinearles1]

Did you have to get it flashed or whatever or was it just plug and play and ran fine after you simply put in another pcm? Having the same issue. Also, what did you gap your plug at?

[@MrAquinas1]

@@kevinearles1 You can usually buy a preflashed pcm. They'll ask your exact mileage and vin number, because the ignition timing will become a hair different with an aging engine and a reputable rebuild place will data correct it in the flash. Don't remember the plug gap offhand. New plugs are normally pregaped nowadays, but you can always do an internet search for just about any spec for just about any vehicle. One thing I hasten to add. It was spitting out codes pointing to a possible bad pcm.

[@kevinearles1]

@@MrAquinas1 appreciate the fast reply. Mine showed code p0303. I put a new plug and coil in and it ran good for like 30 seconds and then started running horrible

[@MrAquinas1]

@@kevinearles1 Another point. You have to get the PCM to recognize your keys. There is a procedure. I did this seven years ago. I don't remember if instructions came with the PCM, or my mechanic advised me how to do it. I'm into my senior years. I used to do all my own work, but now I can only do work that doesn't require crawling under.

[@MrAquinas1]

@@kevinearles1 One more point. To get the warranty coverage on the PCM, they required that I change all the plugs and coils and keep the receipts.

[@GOBEARS1985]

I'm thinking of buying one of these with a bad misfire but the previous owner is telling me his mechanic says he thinks its the ECM any info would be appreciated is appreciated or opinions

[@Kootwoot]

Do you know that there is an inbuilt engine diagnostics tool built into this vehicle? On the dashboard, press and hold in the odometer reset button, then turn on the ignition, without starting and still holding the button until the odo display changes to diagnostic mode. Release the button. Using the button again, one can then step through the various test modes including the engine diagnostic codes, if any.

[@debfassbinder9283]

PHILLIP, AFTER CORRECTING THE MISFIRE, WHAT TO DO TO RESET THE COMPUTER CODING, PRE FOR CALIFORNIA SMOG.

[@concepciondeorienteeljorna67]

I have the same problem sound like that but I'll ready replace the inigtion coil and plug and still soud like that can anyone can help me out please

[@ralphferguson1]

Wouldn’t it have been a good idea to just replace the plugs and coils in the back since it was all apart?

[@FixItPhillip]

Yes that is a good idea, in this particular case the customer wanted the 3 known good coils in the front swapped to the back and just replace the failed one. But yes if you are already back there, wouldn't be a bad idea

[@franko7835]

i have a 2006 ford escape same engine, it does not start now, it did before, i have no error code but car does not start Help!!!

[@swiftchip880]

Hey Phillip thank you for the video first of all! Definitely showed me something new and had a question, i am actually working on my FEscape05 and i know for a fact i got a misfire from a failing plug going on but would that alone be attributed to my cars rough time going up in gears?( I suppose that's what it is) for example I'll have a hard time getting through 50mph and when i finally do i get misfires and definitely feel some turbulence in the pedal, vehicle was gifted to me by family but as far as they know they said it had a couple of things going on with a vapor box, some air sensors, and i believe a motor mount. But could it be something much more urgent?

[@FixItPhillip]

I would check what codes are stored in the engine computer. I would also Check for vacuum leaks and plugs/coils

[@swiftchip880]

@@FixItPhillip definitely will get on that, thank you so much! And hope all is well, thank you for the videos you share with us!!

[@kevinearles1]

Hey Philip. I have the same engine that was doing the same thing and had code p0303. I put in a new plug gapped to .52 and a new coil. Started it up and is running horrible. What could I have done wrong?

[@MrAquinas1]

It could still be the pcm. When I had what definitely proved to be the pcm, the misfire was very intermittent. At times the engine ran fine for a couple of minutes, then would misfire again for a minute, run smooth for another minute, then misfire again, etc. That's the way flakey electronics can be, the weak point on these pcms are what is generally the weak point on electronic boards most frequently with substandard design: second rate capacitors. When the dielectic dries out between the plates of the capacitor, it's no longer doing its job. I think they had a recall that covered vehicles with less than 80.000 miles. I don't know if it's still in effect. I had 82 thousand when mine went bad.

[@AdrianodePaula2]

Check the fuel injectors

[@kevinearles1]

@@AdrianodePaula2 thank you

[@OHBINEY]

my is also doing the same but giving me code for idle control valve , MAF

[@pedrogenarorojascordoba1850]

hello FixItPhillip, my problem with my ford escape is that it loses power and jerks it on the road and I have taken it with mechanics and they do not find the problem.

[@RickyPisano]

My Ford 500 limited is doing the same thing.

[@northvankiwi]

Did you ever find the problem? I have the exact issue as you did. I’ve checked/cleaned or replaced spark plugs, coils, injectors, fuel pump, egr, pcv, maf, iacv, vacuum leaks, even replaced the catalytic converter. No engine codes at all. Runs normal at idle, but if the AC is on it will misfire at idle randomly. At highway speeds it misfires and shakes the vehicle if I’m in a high gear/low revs. Not as bad at higher RPM so is worse under load. Running out of ideas and almost ready to sell the thing hahaha 2005 ford escape 3.0 V6

[@jenniferfeatheringham3386]

Mine 3.0’is misfirojust like that one but no codes does the one your working on show codes

[@FixItPhillip]

I don't believe this one had misfire codes either

[@ralphferguson1]

👍

[@samtan7929]

If change only spark plugs no need to disassrmbly all part

[@rdeleon0360]

What type of cordless ratchet are you using? and could I find one at Harbor Freight!?, I know! I know! 😆👋

[@FixItPhillip]

Milwaukee

[@rdeleon0360]

Ty,,, Great video 🙃

[@rdeleon0360]

My comment is why not replace the spark plugs with new ones and any coils replace them with new also 🤔

[@micho_rizo]

Battery first bb