2005 Frontier Shift Cable Bushing Replacement

Рет қаралды 18,916

Күн бұрын

Пікірлер: 29

@rayholmes9313 5 ай бұрын

Thank you, Robert. This happen to me yesterday at 7 pm, I had to leave it at the store I was at all night because I didn't know what to do, I thought I was going have to call a wrecker to bring it home or to a garage. I came home and saw this video and went back and drove it home the next morning, The part is on its way from Amazon. This saved me a ton of money. Thank you again!! Ray.

@cstobar 8 ай бұрын

Thank you very much, Sir. You save me some money. This was a simple repair that anyone could do. With your professional step by step lesson. Keep sharing your talent. We all appreciate it.

@diy-not5514 5 ай бұрын

Had the exact same problem, got to work fine, when I was about to go back home put the truck in reverse to no problem then I tried putting in drive and the shifter felt loose, quick search in google suggested this video and a couple of minutes later I was driving home, saved me from having to pay a thou truck and repair, thank you very much. The video is easy to follow and makes things real easy.

@jksterke 4 ай бұрын

Thank you very much Robert! This was a huge help. One note: using the tool will help prevent dropping the bushing into the netherlands.

@davidsims5791 Жыл бұрын

Removing the large gear knob is the game changer. Had my small O ring pick. Came out in 2 seconds.

@michaelfelder2640 5 ай бұрын

Many Tanks. I used to go to the library in the 60s, consult giant hardback books, ride my bike back to the house and try and make a similar fix make sense for my cars year make/mod. All day chore. Bushing is on order but a little bailing wire, pilers and duck tape I'm good. Love KZbin for just this sorta thing. Thanks to you for posting.

@mnstrmike 8 ай бұрын

Dude! You rock...pro tip on top of his pro tips...use the paint can opener to push the shift handle clip off from the dash side; pops right out, just keep your hand ready so it doesn't fall into the shifter/console housing.

@bryanbuck6273 16 күн бұрын

Great video. Helped big time. Drove home as well after manually shifting.

@brucewalls5490 Жыл бұрын

AWSOME INSTRUCTIONS....THIS VIDEO SAVED ME A TON AS OPPOSED TO A SHOP VISIT...ROBERT YOU ARE THE "MAN" !!

@keithgifford6130 5 ай бұрын

By far the best video on replacing the bushing.... Wish I would of come across your first... Many Thanks...

@joseamaya941 4 ай бұрын

Grasias hermano por compartir con nosotros sus experiencias Dios lo vendiga

@CostaDimitriades 4 ай бұрын

Thank you, Robert. Your attention to detail is much appreciated.

@88drvr 6 ай бұрын

Thank you so much for your video! My truck did the same thing and voila! you hit it right on the head. Easy fix and awesome step by step how to do! Bravo

@fvg3401 Жыл бұрын

I've been trying to figure out how to change out the Shift Panel - Nissan (96940-EA600) because mine is all marred up. thank you the video is a great help.

@alantillman588 6 ай бұрын

Thank you so much. Got a 2010 Nissan Frontier with the same problem . You sure saved me . 😊👍✌

@martinsandoval3943 11 ай бұрын

Thank you so much for sharing this video. I am currently having the same issue and will fix it later on today.

@denisaparicio7313 Жыл бұрын

Great instructional video man!,keep up the good work

@pedrourraca1585 9 ай бұрын

Time saver thanks for the video.

@danieldrosariotorres8596 Жыл бұрын

thank you I waited a week to find out what was happening this video was great 👍 100%🎉❤

@ismaelmurillo3269 Ай бұрын

Thanks for sharing Great job!!!!

@JoseCarlosSilva-j3b 8 ай бұрын

If I could leave you 1,000 likes I would, thanks 👍🏻

@ELEVOPR 10 ай бұрын

This is great stuff, Something a Crooked Mechanic or Ripoff Dealer would charge you a couple of hundred dollars to do and then give you a song and dance on how difficult it was and how much work is involved. 🥱 🎻 Great video, Saved it to my Nissan list. Thanks for sharing 🤗

@russelljones7561 4 ай бұрын

Thanks for the video. Saved me time and broken parts!

@michoacano1945 Жыл бұрын

Excelente vídeo 🫡☘️

@Biochemechanic Ай бұрын

I just popped that whole black plastic box around the shift mechanism off that contains the red button with the shift pattern piece still attached. You just have to go lower to remove the clips and that entire piece of plastic will come off. It gives a lot more room to work. No extra steps.