Рет қаралды 19,694
In this video, I will show you how to replace the starter motor on Peugeot 307 1.4 HDi, year 2005.
You can see that Peugeot 307 starter motor is not very accessable and the replacement looks a bit hard. But as long as you know where the bolts are located and how to reach them, the time needed to replace the starter motor is no more than an 1-2 hours ( if you have ready to go another starter)
For those who never did the job, on this particular car that video will safe you a lot of time.
Peugeot 307 starter motor is located at the back of the engine, just above the CV driveshaft - it is attached to the engine block via 3 bolts 2x hex bolts, and 1x M8 bolt!
Two of the starter motor holding bolts can be removed from the engine below (hex bolts), the last third one can be reached from the top side- M8 bolt (13 mm socket) via rachet, extension and joint swivel socket.
✅👉 New Peugeot 307 Starter Motor BUY from here : amzn.to/3blRjOY
✅👉 Toolbox Set for you can BUY from here : amzn.to/3OAt0LC
✅👉 Universal joint socket swivel set you can BUY from here : amzn.to/39ICy8m
➡️ Please rate 👍 , comment ✍️ , share 🔗 and subscribe 🔔 for more videos 🎞 : / @superfastdriver
➡️ Join our channel 👇 to get access 🗝️ to perks:
/ @superfastdriver
***DISCLOSURE: Some of the links on this page are affiliate links, meaning, at no additional cost to you, I may earn a commission if you click through and make a purchase. Affiliate commissions help fund videos like this one.
#Peugeot307sarter #peugeot307 #Peugeot307starterMotor #Peuget307starterLocation #Peugeot307starterReplacment #пежо307 #Peugeot307EngineSgarter #Peugeot307DIY #307