2006 Nissan Altima 2.5 Front Engine Mount Replacement

Hey everyone here’s a video on how to replace the front engine mount on the Nissan Altima 2.5 engine Pretty much the same procedure on most of the Same older and newer Altimas with the 2.5
This is a video for my fellow tech to help the tackle the job and possibly help a DIY. This is how I Personally do the repair and damage done to the vehicle you’re working on I’m not responsible. Thanks for watching hope it helps
Stay safe and see you in the next one.

[@RepairsforOats]

Great how to! Very much enjoyed watching you work

[@Itsdazeni]

Kenneth Kinsinger thanks for watching appreciate it bro

[@spotonndiyvids6065]

I broke both bolts on the motor side, yours came off so easy, I had to buy a new bracket to hold the mount Nissan wanted $450 wtf! I luckily found it on eBay only one I looked everywhere for $60 free shipping hopefully it works out good video bro !

[@Itsdazeni]

Oh damn that’s sucks do you live in a rusty area? That good you got a mount though. Thanks for watching!

[@noprojustsharing6506]

Good job 👍🏼you are almost at 85k for the channel, keep it pushing!

[@m.rogers5846]

Thank you and good luck. Would have liked to see the failure on the one you removed but still a good video.

[@Itsdazeni]

Thank you sorry about that. Thanks for watching

[@xANGRYSHOCK]

Can't get mine to line up

[@toolguywy]

Great stuff my guy!

[@carlosprado8252]

Just found this video! Great stuff! My car vibrates when in drive at a red light or stop sign, especially when the AC is on. Could the mount be the problem? I'm trying to figure it out before I go to my mechanic. I will eventually go see him very soon but I just want to know if I'm looking in the right area?

[@Music-enjoyer]

Had the same problems it could be a new battery but also the motor mount would just recommend testing the battery first

[@кариКари-ц2щ]

Классное видео!👏👏👏

[@TurboTyTy]

Nice 👍🏼 not a lot of these on the road around here...trans issues ? 😅

[@Itsdazeni]

😂 every Nissan

[@sbond1963]

Are you down south with no salt? I hope these come off my 06 northern saltima

[@smnnjr4378]

That was a great video. Thank you. What's the torque on these bolts? Or does it not need to be tightened at a specific torque?

[@Itsdazeni]

SMN NJR I’d say around at least 75-80 ftlbs would be safe but I just use my 3/8 impact which is more than enough, did use 1/2” to remove but when installed used my 3/8

[@JorgeSanchez-ul9iu]

Power drill?

[@Itsdazeni]

What?

[@Eternaldaylily]

👍👍👍👍

[@lexxluther5124]

How many engine mounts are there on the car?

[@Itsdazeni]

Umm well you have the front mount by the timing cover, then you have one in drive side above transmission I believe. And then on the bottom two one on each side of transmission/engine

[@stassibonassi7373]

How much for the mechanic to fix it?

[@Itsdazeni]

Labor anywhere from $80-200 depending on labor rates Not including part

[@genx6359]

I need all 4 replaced on my 2006 Altima. Was quoted $1000+

[@ryanpatton1795]

so would this motor mount cause a rattling / vibration when stopped at a light?

[@Itsdazeni]

It’s very likely Ther is also lower mounts “torque mounts” that bolt to the transmission that could possibly be the problem as well given its not a misfire vibration or anything.

[@ryanpatton1795]

@@Itsdazeni Thanks for the reply! I do notice the engine rock when shifting into drive and park. I will check those out too. Would you happen to know how the inside of the front motor mount looks like? I peek into it and it seems like if there is a full circle supposed to be around the knub on the engine, mine is cracked and wallowed open

[@Itsdazeni]

Do you have Instagram?

[@ryanpatton1795]

@@Itsdazeni no I don't, sorry :/

[@Itsdazeni]

Damn well if you’re able to you can email me a picture [e-mail] so I can see what you’re talking about