2007-2013 Acura MDX Spark Plug Replacement Easy DIY

This 2010 Acura MDX is getting new spark plugs. Easy spark plug replacement.
🛒PARTS LIST:
▪️ Spark Plugs: amzn.to/43ugIwF
▪️ Anti- sieze: amzn.to/42wZ2QS
▪️ Dielectric grease: amzn.to/3HDPTMw
🛒TOOLS NEEDED:
▪️ Electric ratchet: amzn.to/3Sw4W12
▪️ Flashlight: amzn.to/48OaGJi
▪️ Screwdriver set: amzn.to/4b6BZ39
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ Torque wrench 3/8: amzn.to/48pwSbM
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoffee.com/ValleyMo...
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.

[@eric6218]

nice and clear! Thanks for making the great video of MDX. I had difficulty to unplug the connector and this video helped me out.

[@seahawksforever9504]

Not for 2007 Acura MDX. Back side is totally different. I need to know how to do.

[@dreynicolas7967]

I'm a little worried about the torque it's my first time doing it. What worse could happen?

[@ValleyMobileAutomotive]

Good question. An overtightened spark plug will put stress on the threads as the engine heats up and expands. This can cause damage to the threads. If the plugs are too loose they can start to back out and combustion gases will blow past the threads and can also cause thread damage. These are the two extremes. If you're not comfortable guessing the torque then purchasing a torque wrench is recommended and they're not too expensive 👍