2007-2021 Tundra Mammoth 3-Inch Front Leveling Kit Review & Install

A Mammoth 4x4 Leveling Kit will raise the front of your 2007-2021 Toyota Tundra by 3.0-inches to eliminate the original factory rake. This Mammoth 4x4 Kit will not only level your Tundra, but it will also increase the front end ground clearance as well.
Quality Construction. These Mammoth 4x4 Strut Spacers have been CNC-machined from aircraft grade billet aluminum for superior strength and durability. Mammoth 4x4 then completes their Leveling spacers in a durable black anodized finish for good looks and long lasting corrosion resistance.
Straight Forward - Bolt-on Installation. Mammoth 4x4 designed their Front Leveling Kit to be a straight forward bolt-on install with no cutting or drilling required. With all the necessary hardware included, this Leveling Kit can be installed in about 2 hours time. terrain.jp/2S0v2Nk
Shop this Mammoth 3" Leveling Kit: terrain.jp/2S0v2Nk
🎞Subscribe for Daily Toyota Tacoma and Tundra Videos: bit.ly/2FtUeUw
Item TU1462
----------------------------------------------------------------
🎞Subscribe for Daily Toyota Tacoma and Tundra Videos: bit.ly/2FtUeUw
Facebook: / extremeterraintacoma
Instagram: / extremeterraintacoma
ExtremeTerrain.com is your shop for the best in Toyota Tacoma and Tundra aftermarket parts and accessories!
www.extremeterrain.com
#tacoma #tundra

[@ExtremeTerrainToyota]

Shop this Mammoth 3" Leveling Kit: terrain.jp/2S0v2Nk 🎞Subscribe for Daily Toyota Tacoma and Tundra Videos: bit.ly/2FtUeUw

[@billkaono6194]

You failed to show that you will need to twist the lower strut eye link to line up with the lower A arm.

[@eluv201]

Best video ever, thanks!

[@ExtremeTerrainToyota]

Thanks for watching! -Zach

[@usa45v26]

11:50 Looks like crossthreading in progress.

[@1ferron]

oh shit good catch ahahaha

[@latu8923]

excellent video, thanks for shairing.

[@impactshooting728]

You can do 35” on 3” little trimming and BMC body mount weld on kit and front bumper trim super ease BMC is only if you want no rubbing at full turn

[@exit44joe]

Thank you!

[@ExtremeTerrainToyota]

Thanks for watching! -Zach

[@kristianc472]

I have 35x11.50R20 (Nitto G2’s) on my 2014 Tundra. It has a 3”/1” leveling kit. I had to trim about 1” triangle off my front skid plate- other than that absolutely no rubbing no matter which way I turn on any terrain. There are times where I have less than 1/4” clearance but it clears!

[@j-cubtv3018]

2 questions. What ur offset? And If I have 1/2 inch spacers on the front bumper. Would that prevent the front from rubbing if I were to put 35s, u think? Obviously the skid plate I would also have to deal with.

[@SBG_ARMS]

Did you have to get aftermarket uca’s?

[@kristianc472]

@@SBG_ARMS no but it is DANG close!! About 3/4” clearance at the closest part.

[@kristianc472]

@@j-cubtv3018 completely depends on your tire width (and I bet rim width would matter also with as tight of clearances as I have). How wide do you run or want to run?

[@billkaono6194]

Also too, a wheel alignment is recommended due to the lower cam bolts being loosened or removed. Headlights may need adjusting because the lift changes the angle.

[@ExtremeTerrainToyota]

Absolutely right! -Zach

[@jacobhillanbrand7988]

I would have liked to see a before and after photo to compare the 2. Thank you

[@dickcod1]

is it necessary to add any additional suspension parts to keep parts properly angled? Maybe a deferential spacer kit?

[@AndrewJTakacs]

Just curious, is there any reason that some cats have a 3 inch front and 1 inch rear level? This seems very practical and something I would like to do but I’m not sure if there’s a reason to lift the rear one additional inch.

[@jeremeywright]

Do u need a different drop kit with a 3 inch leveling kit or is it safe without it?

[@Evan721sxm]

is this bad if towing heavy? i have rear leveling airbags to level the truck when towing but worried about the front kit taking the weight.

[@kennethmichaels5320]

What about the wheel alignment cam on the lower control arm ?? That has to be put back in the same rotation position

[@joeday972]

You can go to 34” or a 295-60-20 with a 3” level

[@jeremeywright]

R the tires on the truck 275/65/18? And after the leveling kit on stock wheels how big can I go 275/70/18? Or 285/75/18? What do I recommend?

[@tireflipper8000]

If it isn't said below, on any rubber bushings you will want to tighten stuff down with the suspension compressed as to not put unnecessary twist on the bushings if its all tight off the ground and you set the truck down, it will twist the bushings and wont last as long.

[@tadsgarage1959]

Do this kit fits 2021 trd pro ? Tks

[@user-of5mm5rw8l]

How do you line the lca back up? Killing me

[@jessetovar100]

Do none of bolts need to torqued to spec?

[@LAZYjoranch]

You can do 35s with a leveling kit with a positive offset wheel. I had 35x1250R18 with a warlord named wheel. With a 2.5 inch

[@j-cubtv3018]

U only have a 2.5 inch lift?? I have 20x9 wheels with +22 offset. U think I can get away with 35s? I also have a 1/2 inc spacer for the front bumper.

[@Larrybobangles]

You have any pics of that bad boy?? I’m trying to decide what to do right now. 2.5 sounds perfect

[@samurai000705]

I feel like the front looks a bit higher than the rear 🤔

[@_takeit3z]

Didn't see you install the bump stop spacers. I'm installing 3' leveling spacer on my 19 tundra rwd. Do I still need the bump stop installed?

[@ExtremeTerrainToyota]

You can if you'd like however it isn't necessary/included in this kit!

[@AudiSportFan1970]

Make sure you get an alignment ASAP after installing, otherwise your tires will wear uneven after only a few hundred miles.

[@ExtremeTerrainToyota]

Absolutely! We always highly recommend an alignment after any sort of suspension modification. -Zach

[@WCxColosus]

I was interested in getting s kit for my truck I was looking at the mammoth and supreme suspension brands. I've read reviews where people say that the top strup cap has to be rotated slightly. Is that true or are both these kids both direct bolt ons.

[@lawrencegraham0]

No this is true. Or rotate strut at the bottom through the bolt hole.

[@ShawnTRD]

What are torque specs?

[@mikebarry3491]

Hey would you recommend a front end alignment afterwards? Or not needed ?

[@ExtremeTerrainToyota]

Always! You want to get an alignment any time you modify your suspension with a lift kit or leveling kit. -Zach

[@boutch856]

That godam shock bottom can't align at is place and can't be turn what rhe heck.

[@Dano-MX5]

I tow a 6500lb travel trailer 4-6 times a year. Will the spacers cause a problem when towing that much weight. 800lb tongue weight and a Equilizer weight displacement/anti-sway hitch installed

[@Evan721sxm]

what did you decide? i tow 10k lbs at about 900 lbs tongue, but i do have leveling airbags in the rear...

[@Dano-MX5]

@@Evan721sxm I am going with the Firestone Air Lift bags and leaving everything else stock.

[@Evan721sxm]

@@Dano-MX5 nice thats what i have. It does raise the rear a bit if you leave 5 psi in it though....

[@SBG_ARMS]

Would you need aftermarket uca’s after it would be ok?

[@ExtremeTerrainToyota]

They're not required but it would be beneficial to add them to help with drivability.

[@georgioantoine4194]

I’d recommend levelling struts. Not these pucks. I have pucks for a year now and they are starting to squeak.

[@ziruk-king4466]

Hi Adam well done. Question will this mess up my factor front end alignment? Do I need to get an alignment after adding kit? Last question would you go with 3 or 2.5 lift I have airbags on rear-- I have pop camper on bed around 1000 lbs. I only use it for weakend Backcountry dirt roads in high country-- thanks Wyoming Guy

[@ziruk-king4466]

I have a 2019 tundra

[@ziruk-king4466]

This question is directed to from end lift- thanks

[@ziruk-king4466]

Front

[@mountainlife1165]

Is an alignment necessary after this installation?

[@ExtremeTerrainToyota]

Yes! An alignment is always needed after modifying your suspension. -Zach

[@MiguelTorres-xf4vv]

What about the front sensor do u have to reset it too?.

[@idessumang7393]

I did a 3inch for the front and now the truck looks squatted in the rear.

[@ExtremeTerrainToyota]

You could always bring the rear up an inch with a small block under the leaf spring. They're relatively affordable and pretty easy to do if you have some squat that you want to adjust! Check out the link below! www.extremeterrain.com/supreme-suspensions-tundra-1-in-pro-billet-rear-lift-blocks-tytu99rl0010.html

[@Tyler.flynn.16]

Have fun dealing w your front tire’s wearing on outside

[@mikehughes8023]

That’s why you get an alignment after any suspension modification.

[@josuemedina5902]

Do you need to lift the back as well to be level or only front is fine?

[@ExtremeTerrainToyota]

Nope! Just lifting the front will level out the look of the truck. Thanks for watching! -Zach

[@josuemedina5902]

Thanks man I was still insecure whether to lift just the font or the back as well 😅 but this help me out!!

[@AudiSportFan1970]

@@josuemedina5902 it puts the front a tiny bit higher, but I’m waiting a few weeks to let it settle before considering rear blocks.

[@jeremeywright]

@@AudiSportFan1970 did your front settle enough to leave the rear alone?

[@AudiSportFan1970]

@@jeremeywright No, I went with 1” rear blocks, looks perfect now. Fit 35’s no issues.

[@NebuChadNezzarKBDN]

The look with just the front leveling kit is not a good look. Rear needs another inch. Plus you lose so much practicality when towing.

[@JoshJorg44]

you can do 65" tires with a 36" lift kit. 😂

[@indomitusEvehementis]

Why would you even try to DIY this yourself on a daily driver or even a weekender? I would just buy a $1000 junk ride and experiment on it.