3" Lift - Front Coilover Suspension - Toyota Tundra | Install

[@johnyhansen1362]

why did u attempt to advertise the crappy ford ..we are here for the Tundra

[@sperkart9767]

Johny Hansen fox products are always used on fords ad they come stock in the raptor

[@joseabrahamibarra939]

Hahaha agree with you on that

[@johnnyz681]

I love my tundra but that raptor a sickest puppy out there!

[@snailnslug3]

@@johnnyz681 yeh if you're an old bald man...

[@johnnyz681]

Jake I’am non of those I won’t spend 80K on a truck unless I would have lots of $$$$$$$ spend! Again love my tundra! Mirror mirror who is the most beautiful truck out there? Tundra tundra you are beautiful But the raptor is the most beautiful! Hahaha!

[@RabbiTrogdor]

This guy should really be wearing eye protection. There could be kids watching... Or worse... Osha

[@kidmoua]

RabbiTrogdor my thoughts exactly. Always were eye protection, especially when using an impact wrench like that.

[@joshk3476]

Well was about to pay for the install. Now doing it myself. thanks

[@ericconrad2383]

How’s the ride quality vs stock?

[@roscoebakery6490]

How much does a setup like this run? I have a stock 2019 Tundra and am deciding what to do with it.

[@willbradley8184]

About 3 grand not getting it installed.

[@gatornation3889]

Way to much for something that has been around since like 2015

[@FWCaptain-kv6sm]

don't ask questions here, you won't get a reply

[@c-zen890]

Where do we ask then?

[@jacobj1517]

Where can we ask questions?

[@muffintop420]

What are questions?

[@ja_landshark1842]

Show install But explain afterward on installation and how was the ride ?

[@fredsausage923]

Say now, you fellas don't want to put that old skid plate back on, go get a trd pro skid plate while you're making the upgrades....

[@MrEfoozz]

😂@1:12 if you have to go just go.(bathroom)😂 but good job someone who loves what they do talk and get his hands dirty. Good video . now just waiting on the wife to give me $$$$ 😀

[@chicanoboyzmtbclub2133]

Great video thank you ! Just one comment safety first eye protection.

[@rob_boss]

I have a 3" and run 35s...just a little trimming of the plastic bumper

[@maryjanenunez2733]

Did you have to do a “body mount chop” for this setup?

[@WQQKIE]

You have to, I have that exact same set up in the front.

[@ineedcoffee4006]

I have basically the same setup and I had a little bit of rubbing on the plastic of the bumper that’s it

[@juggernaut8647]

Since you said the 35 inch tire was a lil bigger than what yall would have chose, what size would you have chose to go along with the 17inch rims?

[@OanhHuuNguyen78]

I do have same truck... color and year👍

[@Chaemings]

Do you guys have the specs on the method wheels? I saw that they’re a 17” but what’s the offset on them? Very clean build I look forward to getting off my stock Bilsteins

[@clintforsythe260]

What's the lifespan of this BDS lift and coilover compared to OEM parts? How long is the warranty?

[@bdssuspension]

Our kits come with a no fine print (lifetime) warranty on the BDS hard parts to the original purchaser. Bushings have the same warranty but are a wearable item so depending on use/abuse may need to be replaced at some point way down the road. FOX product comes with a 1yr warranty and being a wearable item you'll want to follow the service schedule to keep them in top shape. FOX has a recommended service interval guide available at www.ridefox.com/service.php?m=truck

[@TankHandy]

Love bds

[@AggiePhil]

Great workflow if you have a lift. A bit different and harder if using a jack and stands.

[@JoshJorg44]

Yeah I don't think I would ever try to do all this at home. This would be one project it would be better to pay someone else to do

[@sw7160]

Fanagalin my @#$, that UCA bolt was a pain...Thanks for the great video!

[@Alex1234845]

You said this 3 inch kit will work with high speed traveling. I’m looking at the 4.5” coil over for that year tundra. Can I do the same high speed traveling?

[@bdssuspension]

Use it and Abuse it Alex! Those FOX Coilovers are engineered to soak up the bumps under high speed travel, even with the 4.5" lift system we offer.

[@zacharyriley4122]

Hey sorry I know this video is 4 mos old...do you guys sell any fox kit for 2005 Tundra that’s like this 3.5” kit?

[@romanbogdan8872]

don't forget to also recalibrate the radar for the tss( toyota safety sense) . once you have the truck higher it will pick obstacles a lot faster. friend of mine was driving on the freeway second day after the instalation and the truck locked the brakes at 60mph because it picked up the car 300 ft away. very important for any lifted toyota after 2018

[@pilgrim7779]

Doesn't the TSS only work while cruise control is engaged?

[@Rockdaground]

When you tow heavy with a stock tundra the nose points up slightly anyway and nothing happens. I doubt a leveling kit will either.

[@romanbogdan8872]

Rick , take it to the dealer they can recalibrate it in 15 min.. no biggie.

[@romanbogdan8872]

They won't freak out but they will charge you if you didn't do the work at a toyota dealer. That is why they charge 3x$$$

[@romanbogdan8872]

Plus they could void your warranty . GM voided it for me on a silverado for a 2 inch front level kit. VW voided a warranty on my car for a turbo so be prepared. Now i have a Ram diesel. F the warranties. Lol

[@gatornation3889]

Most do not tell you that the FOX shocks need to be inspected/rebuilt every 30,000 miles, roughly. That is a huge pain for that price point. I think I will stick with Bilstein 6112's for my tundra. BDS needs to step up their game, charging above premium pricing for products that come in below mid-level Bilstein shocks.

[@mhopkins491]

Really bilstien is better then fox shocks

[@gatornation3889]

@@mhopkins491 it is just my opinion, I am just an average guy who goes in the woods.

[@greggorystamm5212]

Every 30k even for a pavement queen? Or do they wear out with off road usage?

[@gatornation3889]

@@greggorystamm5212 they wear out over time. On or off road. King shocks are the same way

[@greggorystamm5212]

But factory shocks can go 75-100k?

[@mhopkins491]

How about hooking me up with a lift for my ram ill even get a bds tattoo if u do

[@jimbutcher7739]

I'm interested in having this exact lift done to my 2021 Tundra. Do you know if this will fit it and can you help me find a local shop to install it...?

[@Jaimeleon20]

Jim Butcher it should fit. I just ordered one from jack it but it’s the one with the 2.0 front coil overs so it’s about $500 less

[@chadsteele1]

When are you coming out with a 3" for the Nissan Titan? The new Half ton. Pro4x. I'm not looking for fancy(like remote resevioir) just quality and to level the truck.

[@vavhab]

Would this coilover kit work on the 2019 tundra as well?

[@robschreurs9132]

What offset did you go with on the wheels?

[@clintforsythe260]

Following

[@bigptundrabeast2875]

I have a question and I need your help. I have a 2016 Tundra 4WD with the 7” BDS Coilover lift with DSC and the Fox shock absorbers in the rear that are about 25” in length. Obviously I have a 4” block in the rear but I was and here is where I need your help. I’m looking for the Fox 2.5 reservoir with DSC for the rear but I want to make sure they fit. The only ones that seems that work are the Fox 883-26-006. Are these the ones I need?

[@WarPartyFitness]

I will say one thing pay attention to that ABS sensor wire lol. I had to repair mine due to unforeseen circumstances.

[@scottrose2989]

Shackle does not tap out that easily if at all!

[@stevenschwartzjr1984]

I liv Tundras but I need this kit for a 2021 Ram Rebel, just saying lol

[@mnnascarfan]

What is with no saftey glasses? Must have special eye protection?

[@troy9834]

Tires are way to big,,,,, looks stupid,,, like big ass donuts

[@CrazyGreek80]

I would take my Tundra and have 88 rotors install it herein So Cal they have the best install videos.

[@MiguelTorres-xf4vv]

How much it call for the complete installation?

[@ericbofcarsonc6720]

can a guy upgrade to fox 2.5’s all four corners?

[@ProGoHERO]

Yes my Black Friday purchased for my tundra. Nicely done

[@chrisweaver2143]

When placing the front coilover onto the bottom control arm which way do you off set the shock to . The front or rear of the vehicle ? Does it matter ?

[@mariomorales2632]

Looks amazing! Just curious you guys installed “35” tires, they must rub inside the firewall. I have a 4 inch SST leveling kit from ready lift, with “33” tires and they just clear. So just wondering if the tires rub on a full turn? Great video!

[@joeyjordan1209]

Mario morales wheel offset needs to be known. It makes a huge difference

[@04beater4]

I ran 34" on factory black suspension. That's on the TSS rims and largest you can run with those rims. Offset is a big factor.

[@justanobserver7153]

Great Video ! Love the Tundra ! Please wear safety glasses from now on Jordan.

[@jakemaddox76]

Are the following necessary for this kit: - Sway bar spacer - Skid plate spacer - Bump stop spacer - E-brake/brake line extender brackets

[@bdssuspension]

Hey Jake, we include the diff drop spacers and skid plate spacers as part of this kit. The diff drop improves the CV axle operating angle and the skid plate spacer allows clearance for the diff once repositioned. Brake line brackets and e-brake brackets aren't necessary at this lift height along with the any sort of sway bar correction. We design this as a complete system with everything you'll need to lift your Tundra 3". For more info check out bds-suspension.com/product?kid=824F

[@binnie465]

sagged

[@sendit2873]

no loctite on strut bolts you also let the front hang on the wheel sensor wire bad deal dude

[@zacharyriley4122]

Hi guys sorry this comment is on a 4 mo old vid...do you guys sell a 3.5” kit that is equivalent to this kit for a 2005 tundra. i always wanted a XS-P and finally got one after all these years and wanna look at options to get it up a little bit that don’t ruin it. i wanna do it right, but it doesn’t need to be ridiculously high-end compliments or anything. Just Quality engineering (gonna work right and not mess anything up or cause anything to wear prematurely) and quality manufacturing (gonna keep working right for a long time and not break down on us). thanks a bunch.

[@bdssuspension]

Hey Zach, Sorry we do not offer a 3" Coilover option but we do have our 2.5" kit and you can see it here in the link: bds-suspension.com/product?ma=12&mo=78&ty=1&yr=2000-2006

[@chrisnickells4481]

Does Bds make a 6" lifted strut for 2007 ram 1500 4x4?

[@bdssuspension]

We offer a 6" strut spacer system and you can check it out here: bds-suspension.com/product?ma=2&mo=16&ty=1&yr=2006-2008

[@davidwolfman2485]

Would it work in front for a sequoia ???

[@4regoverland]

Pretty sure I found what I want to do -- saw the Victory truck in person "Two-Hundy Tundy" and it looks awesome up close. Great video guys.

[@tundrawhisperer4821]

What size tire are you running on this new set up? What is the biggest tire you can clear with this set up? Thx

[@cole909cole]

Pandra build?

[@yotatoy8218]

I should’ve gone with the readylift, you guys have an issue with the steering rack pinion after installing your lifts. Include new bushings or out a warning in the damn instructions.

[@deeznatzinyomouth3934]

Lol! You just installed it wrong.never have problem with steering rack.

[@elmeracobamamaril5653]

Tundra is best ever

[@jimmytran2411]

How much total for an upgrade including labor and materials? Thanks sir

[@msalazar89]

40k

[@Justforfun-ek7et]

The victory 4x4 Tundra! Looks way different now.

[@JohnDrach]

Do you need to get new control arms if you're installing Fox shocks?

[@Millirawk]

If you're above 2" lift and gonna be off roading it hard, it's probably a good idea to. Although, it's not 100% needed to drive the truck, it's highly advised

[@cleanwhips3469]

Earned a like and subscribe from me 👍👍 nice work guys👏👏

[@nabatron21]

Can i get this kit on a 2019 ram rebel?

[@campingenfamilia2020]

Where is your place

[@randy4210]

no eye protection

[@willcole3066]

Nate what happened project sd126 is sad

[@dustinsalisbury4383]

This thing looks sick AF

[@Trd2020]

Such a detailed video. Thank You!

[@steltoronto7553]

Can you please tell me where your shop is located ? Thank you . Steve.

[@steltoronto7553]

@William Thank you ! 👍😀👌

[@Not_Andrew_Huberman]

This dude rap?

[@leifyaeger1]

Whats the wheel and tire setup on this

[@babrille1]

88rotor

[@KoolHandLuke589]

What is the offset of the wheel?

[@octanemayhem2686]

How much for the 3" kit ? And what are the wheel and tire specs ?

[@I41535D]

hey is jus what you see pal, tires are 35x 12.50 r 17 wheels no idea but you can look em up 17 inch method wheels to find offset

[@LoopDoc]

SWEEET

[@javyrod0]

Thank you for the info

[@bdssuspension]

Any time!

[@pojdiavaj1422]

3” lift is a regret

[@robertoramos8257]

4 over 3 inch?

[@brianmillican4985]

Cost?

[@mikemiller1502]

Very well done video.

[@kimsantan2678]

I love that buddy how much for all of that?

[@bdssuspension]

Price depends on what options you go with, check out our website to build your own - bds-suspension.com/product?ma=12&mo=78&ty=1&yr=2016-2018

[@brianmillican4985]

How's the ride vs stock? Softer or firmer?

[@MrRey007]

i have that very same kit and the ride is firmer. not softer.

[@gaffle-411]

Looks perfect!

[@thebeardedgardener5527]

Seriously slow down the talking. You seem so in a hurry to speak for no reason focus on making a good video.

[@Justforfun-ek7et]

what is the offset of that method wheel, it looks very good.

[@deepblu01]

0 offset according to Victory 4x4s build page for this truck

[@Justforfun-ek7et]

deepblu01 thanks my friend! I have been looking for some of zero offsets in a Method race wheel.

[@donthesheek]

Whats the cost for this upgrade and how's the change in the ride feel ?

[@30minforasn]

Weird how a 2018 tundra didnt come with stock bilstein rear shocks.

[@tpj1959]

I think you have to have the TRD OffRoad package to get the bilsteins. I would like to do this with OEM rims and tires.

[@rudedogii]

I got those Fox coilovers on my Colorado. The strut/springs are too soft for my truck and Fox was no help getting an upgrade.

[@josegarcia8999]

Can I keep my stock 20” rims if I install this lift ?

[@СергейНекто-т8н]

Доступно, понятно - только без указаний на конкретный перечень оборудования. Интересно, а как у них обстоят дела с "легализацией" подобных изменений?

[@beeslandscaping]

Well that affect Toyota safety sense in the front end

[@c-zen890]

Is this supposed to be a question?

[@beeslandscaping]

Chriz Sea. Yes it is

[@TankHandy]

First

[@genisis53]

jarvis handy this is the first time I’ve seen a “first” comment that was actually first lol

[@GRD204]

In other words go buy a ford raptor and save yourself all this trouble.

[@causeuncause4059]

Or buy urself a pre runner and build it to ur standards

[@tundrawhisperer4821]

Nathan Collins after you go buy that raptor, better go look for a cardboard box to live in, no money left. 😁😂😁

[@deeznatzinyomouth3934]

...not really, you mean go buy your self a toyota and save your self from a junk raptor piece of crap transmission.lmao

[@MrRey007]

i assume that the raptor wont be as reliable as the tundra. So i rather to upgrade a tundra to achieve suspension levels of the raptor and still ill be having a nice performance truck for many years.