2007 Ford F150 Windshield Washer Pump Replacement

In this video, I show you how to replace a 2004, 2005, 2006, 2007, 2008 F150 Washer Fluid Pump and Nozels. My 2006 F150 started having problems with the windshield washer fluid pump a while ago, and I’m just now getting around to fixing it.
The process is relatively easy, but I would suggest you go ahead and replace the pump and the nozzles at the same time. The parts aren’t very expensive, and its easiest to just replace them all at the same time.
LIKE, SHARE AND SUBSCRIBE TO THE CHANNEL IF YOU LIKE THESE TYPES OF VIDEOS
You can follow me on Facebook at / iamafixer or on Instagram at / iamafixer
Here are the parts I used to fix my truck.
Washer Fluid Pump: amzn.to/30aI1yY
Washer Fluid Nozzels: amzn.to/2OdW3sc
Washer Fluid Hose/Y-Fittings and Nozzels: amzn.to/30gXtsp
**Affiliate Disclaimer: Some of these links may be affiliate links, which means that I may earn a commission if you purchase through these links. It will not, however, affect your price. These links are in association with the Amazon affiliate program, and I am an Amazon associate.

[@ajsbrushworksllc8348]

Problem identified, potential causes. Solutions presented. Clear, concise instructions. No unnecessary BS. Great job. Fellow youtubers, take note. THIS is how you make and post a video.

[@IAmAFixer]

Thanks! Glad you got some value out of it.

[@randyraeder2333]

I am nominating this for Best of Utube repair presentation. You ARE a fixer. Thank you!

[@IAmAFixer]

Thanks, Randy! Glad it helped you out!

[@jackfischer5153]

My windshield washer on my Ford F250 that wasn't spraying and I hooked up my electric air pump for my tire and put it in the reservoir and put duct tape around to seal it, I turned on the air pump and the internal pressure blew out the lines and dang it started working.

[@krisnewman9007]

You did a great job of explaining things in a manner that anyone could understand.

[@IAmAFixer]

Thanks, Kris! I appreciate you watching!

[@KTHenry]

Thanks for the explained instructions. They were easy to follow and it only took two and a half, maybe three minutes for me to replace the pump which solved my problem. 🙌

[@kirkwoodbury4546]

I am not a great auto mechanic but I can do small stuff on new cars and a little more on older ones. This video walked me through the steps perfectly, saved me a lot of time and head scratching not to mention money. Very well done video, clear instructions with really good video. Checked the splitter first and it was bad obviously the heat from the engine bakes those dudes . I follow the rule check the easiest thing to first, which you identified. Keep up the good work.

[@IAmAFixer]

You got it! Thanks for watching!

[@grantv7825]

Great video, just swapped my 2006’s pump out in ~20 mins with your help. That fixed the problem for mine

[@IAmAFixer]

Glad to hear! Thanks for watching!

[@nitr0junki3]

Nothing like a good parts cannon video

[@rivercityinvestor]

Great video! I just watched your excellent walk through of this and it took me 5 minutes at the most to exchange the parts!!!!

[@IAmAFixer]

Glad it helped you, Derrick. Thanks for watching!

[@InfoManWDw]

Fantastic example I Am A Fixer! That was an excellent video where you walked through the steps nice and easy. It's very helpful to show what doesn't work along with the final fix rather than a one-minute video of straight success. :-) We have a 2004 Ford Expedition and, although not the exact same design, I expect that we have a Y-splitter at the front windshield too (will have to check). We also have an additional window washer at the back Liftgate so there were two tubes coming out of the washer fluid reservoir pump with one tube running back through the roof to the Liftgate and the other tube up to the Y-splitter for the front windshield. Obviously, the washer motor is a slightly different part. One thing that could be added would be checking the related fuses in the fuse panel and I think you can tell if the motor is running in that it will make a little vibration and/or noise.

[@looloop-hn7ci]

the y-splitter was the fix on my 2004 f-150. five dollar assortment pack and done. Thank you very much for posting!

[@IAmAFixer]

You’re welcome. Thanks for watching!

[@JoseGarcia300]

What’s the y splitter?

[@J0hnnyJ0hnny]

Thanks for the great description, my F150 2008 fluid pump died and it was a cinch to replace it after watching this video.

[@IAmAFixer]

Glad to hear it!

[@ggumisme]

Same splitter corroded on my truck. Like you, I noticed after replacing sprinkler heads and pump. Thanks for your vid.

[@IAmAFixer]

No problem. The good news is we basically have a brand new windshield washer fluid system! 😄

[@BigSizzle88]

Thanks for the insight, just got my F150 a couple days ago and this was my only problem with it.

[@IAmAFixer]

Awesome! Thanks for watching.

[@Jay388]

Great video! This is a super simple job, probably 5 minutes tops. Thanks! 😎👍👍

[@IAmAFixer]

You’re welcome. Let me know how it goes!

[@danielrobison893]

Hello...this video was such a big help. My 2006 F-150 stopped spraying a few weeks ago....I just replaced the washer pump and it was so easy! Thanks so much.

[@IAmAFixer]

Glad to hear it!

[@prezzzrock]

Excellent video. Gave me a great start in trouble shooting my issue which I will tackle now with confidence this weekend. Thanks!!

[@IAmAFixer]

Glad it helped you out, thanks for watching!

[@ssmatthews]

I did the same as you. Replaced the motor only to find out it was the little Y that was leaking. Replaced the Y and the nozzles while I was at it. Your video helped to make it a DIY and probably saved me $200. Thanks! 👍🏻

[@IAmAFixer]

That’s awesome, glad it helped you out! Be sure to subscribe if you like these kinds of videos.

[@BellsFcameroZ]

Works great and fix my 2006 Ford F-150 it was the pump and the sprayers great video

[@IAmAFixer]

Thanks! Glad it helped you out!

[@petercavalieri1422]

Thanks for great instructions. Note to those who have an older vehicle: check that the filter screen is not clogged. Can save you the price of a new pump if it sounds like it is operating.

[@luckydog-287]

"Great video and appreciate your efforts."

[@arod605]

This video helped. I had one clogged washer valve. I used a can of duster to blow air in the valve and thru the hoes. That’s 1 less headache.

[@jameskenyon4522]

Thanks for the great video. Very nice presentation!!

[@GS-rs5bh]

thank you... you made it very easy to replace this part

[@IAmAFixer]

You’re welcome. Glad it helped. Thanks for watching!

[@nukedaddy]

Thank you! My pump is sounding exceptionally loud and zero fluid is coming out. Seems like the impellers may be gone. Going to try the pump fix first…right after I check the Y connections.

[@VIRIAZUL1]

Thanks to you ibwas able to replace my reservoir 😍😍😍 next thing my nuzzles too lol I should it ordered too

[@IAmAFixer]

That’s great. Glad I could help

[@juliopecina4588]

I’m not a fixer man but this explanation is so helpful, I’m from Mexico so I tried in my Ford Lobo (F-series) and worked good, thanks

[@IAmAFixer]

That’s great, thanks for watching!

[@robnation2475]

For anyone considering new wipers... You can install 22" beam-style wipers on both sides of a 2004-2008, 2009-2014, 2015-2020, 2021-2024 F150. They work perfectly and sit much lower than conventional blades. Full length contact to glass as well.

[@timener7452]

Thanks for sharing this video. It worked perfectly. 5 minute job from start to finish.

[@earndog71]

Thanks for the pointers, great video

[@IAmAFixer]

Thanks, Ernie, glad it helped!

[@destinglisson3145]

Thank you!

[@RashaRamsey]

Thank you

[@IAmAFixer]

You’re welcome

[@gvalcin9377]

Thanks for the video and links.

[@anthonylale1142]

Great video and appreciate your efforts.

[@IAmAFixer]

Glad you liked it, thanks for watching!

[@devonsdoppleganger3768]

I better way to see if you have any clogs is to take the hose off the pump and blow through it if any air or any water comes through then it’s clear

[@kerrypierre9494]

Thanks for the vid, very helpful 👍

[@IAmAFixer]

Thanks, glad it helped!

[@isaacsoberano5898]

This video really helped. Thanks 👍

[@IAmAFixer]

You bet, Isaac, thanks for watching!

[@mendezeddie1322]

Having same problem 😕 ty sir gonna run these steps

[@IAmAFixer]

Great! Good luck, thanks for watching.

[@t.j.eskelsen5755]

Great video! I had the exact same issue with the plastic y-Splitter.

[@maximusvonce1381]

Easy pump install. Thanks.

[@IAmAFixer]

You’re welcome. That’s for watching!

[@scottt3024]

Thanks man! I’m doing mine tomorrow! 👍🏼

[@IAmAFixer]

Cool, thanks for watching. Let me know how it goes.

[@78jorgedavid]

It works!!!, I just fixed mine, Thank you

[@IAmAFixer]

That’s great, George. Glad it helped!

[@jimtarzon906]

The DIG 1/4 in. Barbed Tee is used to provide a secure connection of three pieces of 1/4 in. micro tubing, soaker hose or drip-line. Each connection offers raised barbed ends to ensure a strong, water tight fit. At Home Depot, $5.00

[@jaredc2532]

Thanks for the info. first thing I ended up checking was the split connection. It was corroded just as bad as yours.🤣

[@IAmAFixer]

Glad it helped you out. Thanks for watching!

[@nastysoda9212]

thanks!

[@anakinandy]

My problem was the y pipe between the two nozzles too! Bought a Y vacuum pipe and covered with tape to prevent sun damage lol

[@IAmAFixer]

Probably pretty common, my guess.

[@223dmr7]

Thanks brother

[@IAmAFixer]

You got it!

[@josed915]

This helps a lot, thank you.

[@IAmAFixer]

You’re welcome. Thanks for watching!

[@garyteague4480]

Thanks bro you helped me

[@IAmAFixer]

You’re welcome, Gary. Glad it helped you out!

[@elmokidd1297]

Very helpful. Thanks

[@IAmAFixer]

Thanks, glad it helped you out.

[@alanday5255]

Thanks a lot

[@bb713]

very helpful thanks a lot

[@IAmAFixer]

No problem, glad it helped you out!

[@bigthinkinguy]

Thanks, very good video.

[@ChezJohn]

Do these pumps leak at all? I took my entire reservoir off, filled it in my bathtub, plugged the drain and no leaks whatsoever. I put it back on the truck and it leaks. It feels like it’s leaking from the bottom of the pump, but it feels dry at the hose outlet, I’m stumped, any ideas you could help me with? Great channel btw thank you. Oh P.S. I did replace my SERIOUSLY clogged nozzles.

[@IAmAFixer]

It is possible that when you get it installed, the connector is causing the pump to not sit in the hole correctly? Maybe leaking around it.

[@ChezJohn]

@@IAmAFixer hey thank you so much. I’ll check it out. 👍

[@jamesmoore5364]

Will the wipers still activate when you push the washer fluid button if the pump is out or if the nozzles are stopped up

[@robnation2475]

Y didn't I watch this video first? It 'twas the Y for my 2004 FX4. After I ordered a pump for $8... Weird because the driver's side was working for a bit then they both petered out a dribble. BTW a carefully placed stainless screw will hold the 2 covers together (just under the hood lip).

[@BSIRM]

Did you have to prime that pump? The one I got from Autozone says it needs to be primed first.

[@robertacosta957]

I was thinking of maybe I would have to pull out the tank look like it would be easier?

[@IAmAFixer]

🤷‍♂️maybe. I found it relatively easy to repair without removing the reservoir. There’s definitely more than one way to skin a cat.

[@JovanyFerrous]

Hi long story short i pulled off my windshield washer electrical plug when i replaced my radiator support. i know the black with white stripe is one of them from your video, but can you tell me what color the other wire is? thank you

[@mikec2220]

I had this same issue on my 06 F150

[@davidmcguffie1714]

can you give the pump part number from amazon?..tried to find it but they all said they didnt fit my 2007 f150 4.6..btw i gave my vehicle description

[@IAmAFixer]

amzn.to/3xq7RRi

[@mesmithy2415]

I'm surprised an AC Delco pump fits the electrical connector on the F150.

[@ryanfishydays]

Does this work for a 2008?

[@IAmAFixer]

Should work on the 04-08 5.4L. They’re basically the same.

[@timmyjimmytoo]

Hey Thank you for the video.. in my F350 the washer fluid just runs straight out? Why is that!? :) Thank you!

[@IAmAFixer]

Likely a bad seal around the pump or a crack in the reservoir would be my guess.

[@timmyjimmytoo]

@@IAmAFixer Thank you for your reply, it doesn't leak, it just pours right out as if there is no bottom. :) I will look into it further, Thanks again!

[@A.C.71]

My pump is good but the rubber that holds it on the inside of the reservoir is coming apart and depositing debris into the tubes feeding my nozzles.

[@IAmAFixer]

Just replace the pump. Not very expensive and comes with the rubber, I believe

[@A.C.71]

@@IAmAFixer yup it's been fixed. Thanks

[@A.C.71]

@@IAmAFixer I used your link so hopefully you got something for that :) for all those wondering it fit perfect on a 2005 f150 super crew

[@IAmAFixer]

Glad to hear it, thanks for watching!

[@Ra-pg8hm]

You need to split this video up... I searched for HOW TO REPLACE not trouble shoot.

[@jamesrichter7363]

Very helpful, thanks