2007 HONDA ACCORD REPLACING FRONT BRAKE PADS- EASY DIY

[@jieunification5]

Didn't even know about pushing the caliper piston back as my old car didn't need you to do that. This is the only tutorial video that I could find that mentioned it. Almost took my brake pads back looking like an idiot. Thanks for saving my amateur mechanic dignity. 👍

[@Fatbodypyle]

Don't put grease on the top of those pad glides the grease attracts dust and debri and gums up the free movement of the pads

[@anitataylor4817]

Great job!!! I’ve never replaced brakes on this car before and you made it so easy. Thanks so much.

[@philipb]

Thanks Dan, I changed my brake pads today following your instructions.

[@brayamcatalan4317]

Nice and simple. Thanks a lot!

[@juvenaldominguez7022]

Hi love it thanks alot.Now the thing is to find someone to do it like u.

[@davidpugh1985]

Thank you for making it look easy good video 👍

[@geoff4705]

Great video! Though when you are pushing the piston back, it looks like your screwdriver is prying the opposite brake pad away from the rotor. Is that right?

[@don08ngo]

Are the springs a must? I notice there aren’t any when I removed the caliper today.

[@luisgarcia-dd8qc]

Highly helpful..,.

[@christiandabarcaa]

Simple and technical. Thanks.

[@xgearheart8592]

Anyone know where I can get the wire to hold the break pads out? My Honda kit did not come with these wires, I'm unsure how necessary they are.

[@nickolassaavedra1737]

My car doesn't have those v springs to prevent the pads from touching the rotor! Do you think that's a problem?

[@xgearheart8592]

Mine Honda kit did not come with them either. I've installed today without them. Hoping for an answer of how necessary they are.

[@JakeNaughtFromStateFarm]

I’ve never used a torque wrench, I just tighten it down. Figure if I get it snug with a 3/8 ratchet, it will be close to right lol. I may just go pick one up though.

[@howardthaddeus3869]

i guess I'm kind of randomly asking but does anyone know a good site to watch new movies online ?

[@arianmerrick9067]

@Howard Thaddeus Flixportal :P

[@howardthaddeus3869]

@Arian Merrick thank you, I signed up and it seems to work :) Appreciate it!

[@arianmerrick9067]

@Howard Thaddeus glad I could help :)

[@alexpacheco6132]

Nice job thanks for sharing helps a lot

[@dracarnoir7606]

Nice job well explained.

[@GamingHistory.]

Very informative, thanks!!

[@wilberalfredo1922]

Very detailed info 👌 👍

[@Spoder_Man]

I’ve heard you can to use anti seize instead. 🤷‍♂️

[@lonekyoya9155]

how do you know if u torqued the bolts to the right amount ??

[@DantheFixitMan]

You will need to use a torque wrench. You might be able to rent one for free from an auto parts store. amzn.to/2VAH666 This is a link to a torque wrench if you decide to buy one. I used to just go by feel, based on the size of the bolts...but just do whatever you feel comfortable with. Thanks for watching! -Dan the Fix it Man

[@lancevance5632]

Rotor size?

[@reginalmccarthy9764]

Is the 2007 and 2009 use the same brake pads?

[@Debauchery_Tea]

A quick search showed that they should. Best bet is to use an auto parts website & plug in your details to be sure.

[@travisrichardson834]

Fronts weren't worn

[@MakeItHappen223]

You didn’t have to turn the caliper piston????

[@DantheFixitMan]

No, Not on the front calipers. Thanks for watching! -Dan the Fix it Man

[@MakeItHappen223]

@@DantheFixitMan ok question about the pin boots one of mine were broken off so only about half of it is on there is that fine? Or do I have to get new boots?

[@DantheFixitMan]

@@MakeItHappen223 it’s probably ok if you need to get it back on the road in a pinch, but I would recommend replacing them to keep debris from getting into the slide pins and getting them stuck.