2007 to 2013 Acura MDX master power window switch replacement DIY guide save $300

Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#mdx #acuramdxwindowswitch #windowswitch #newwindowswitch #mdxwindowswitch #2007mdxwindowswitch #2008mdxwindowswitch #2009mdxwindowswitch #2010acuramdxwindowswitch #2011acuramdxwindowswitch #2012acuramdxwindowswitch #2013acuramdxwindowswitch #masterwindowswitch #mdxdoorpanel #panel #doorswitch #windowswitch #windowdontwork #mdxwindowdontwork

[@khaiddinh]

Just replaced this for my 2011 MDX. Couldn't have done it without this walk through, so thank you for posting!

[@RBTheMechanic]

Nice good job!

[@conversegurl777]

I didnt unhook any harnesses just used a chair to hild the door up.. And no screws left behind.. 💪🏾💪🏾💪🏾 Just got finished..

[@RBTheMechanic]

Yeah that’s good idea

[@Noormuffin]

Very good video. I would attach the wiring harness/connector to the new master switch to make sure it is working before putting every thing back.

[@RBTheMechanic]

Yup that’s good idea

[@jonathaniannielli7642]

Bada bing bada boom! Thank you sir! Appreciate the walk through

[@RBTheMechanic]

Welcome

[@tatersalad2941]

Thanks so much for this video. Amazon replacement part and KZbin to the rescue!

[@RBTheMechanic]

Welcome!!

[@Stopthecrazz]

I’m gonna try it

[@orvilavila5823]

Gracias amigo me ayudaste muchísimo

[@RBTheMechanic]

Welcome!

[@josiahbrown8102]

Thank you

[@RBTheMechanic]

Welcome

[@sansthepuppyplayer4152]

You didn’t show how to separate the door handle from the panel itself. When you pop the panel off wouldn’t the door handle still be attached?

[@RBTheMechanic]

I think so

[@ubertinoayala8837]

Will Having a bad master switch also not allow to rill the windows from other door panels?

[@RBTheMechanic]

Not always depends how faulty is the switch

[@daronevans2556]

You should edit this and remove the first step where you pull the plate from behind the door handle. That is a useless step and part is easy to break.

[@RBTheMechanic]

Thanks can’t edit but the tip u put in people will know

[@25falcons]

all my windows went out except the passenger window. however, when I try to open the rear windows from the driver's main switch, I can hear a click in the rear windows, but they don't move. I tried changing the door wiring harness, but that didnt do anything. Given that one window works and the others don't go down but they click when I press the main switch, do you think changing the master switch will fix my windows?

[@RBTheMechanic]

I’m not sure if it’s master switch u might have to check voltage to motor one the door panel up. Did they all go out at same time?

[@25falcons]

@@RBTheMechanic yes, that’s the strange thing, they all went out at the same time, which makes me think it’s not the motor because that would he too big of a coincidence

[@RBTheMechanic]

@@25falcons check the fuses

[@johnpali5894]

Did you figure out what was the problem with your window switch? My 2008 MDX started to have some issues with the back windows , i can hear the back switch clicking but no action. When I open the drier door all the switches work. Do you think could be a ground issue or Brocken wire somewhere.

[@RBTheMechanic]

@@johnpali5894 I had bad switch twice new one went back after a week replaced it again

[@butchmcclain]

The only thing I had to do on my 2011 TSX Acura sedan was to use a spudger tool and pop the switch cover off and the switch came out.

[@RBTheMechanic]

Cool

[@tooththrhr]

Hello, I'm having a problem with my passenger window. When I go to roll it up sometimes it goes up for a split second then goes back down. What could be the issue ?

[@RBTheMechanic]

It’s getting jammed on side rails I would try lubercation first

[@tooththrhr]

@@RBTheMechanic thanks 🙏

[@peterotteveel4538]

F. G'S. S.!! USE TRIM REMOVAL TOOLS !! ,,(facepalm)

[@peterotteveel4538]

Not screwdrivers and metal clip tools ! Use plastic paddles/"spatulas" =Avoid scratching/marring ..