2008-2012 Chevy Malibu headlight and plug replacement

[@JohnMiles2007]

Well done. I am to understand that the headlight connectors on the 2012 Malibu were very pieces of junk. So replacing them may be a prudent step. Thank you for this video, hands down the best I have watched on this subject.

[@BOB-op7ec]

Good video, I replaced the bulbs many times in mine. I know how to get everything apart it's the wiring I do know how to do. My low beam plug is burnt out. I watched your video I was trying to understand which wire is to what. My low beam plug has 3 wires coming out of it but looked up the Replacement plug has 2 wires coming out of it? Can you use crimping connectors on the wires instead of sauter? Thank you

[@robertreinhardt291]

This video was amazing and I appreciate you showing both highbeam and low beam connectors in part numbers this is amazing for Malibu owner since Malibu is completely crazy the way it’s put together

[@manuelavechuco4194]

i have a question, if you were to replace the whole headlight set is it simple as just unplugging the old one and plugging in the new one?

[@Jamm1nJames]

Dang didn't know how hard it was to change a light on a Malibu but now after watching this I can change mine

[@owenwelge7405]

Can I use electric tape if I don’t know how to Sauter or have a heat gun??

[@error3847]

Supervisor quality and crafting! That's got the good understanding 👌 here I go. My turn!

[@codybice8967]

what about h11, i have a yellow and two black wires, new plug has only two black

[@arlisha6]

Thank you so much for this video. I have been having this problem with my headlights for a while now. Great video!

[@jamesrichardson771]

All right💥 another Ace mechanic in flip flops!

[@shlinky3000]

I bought the plug for my low beams but i dont know which cable connects to the yellow wire and which one splices with the other 2 black

[@wadelescault2751]

great video , I was able to get this done all under 30 min

[@brianhall8097]

Thanks for your video it wasn't long drawn-out you got to the point and you had very good quality videoing and you explained it very well thanks so much and happy holidays

[@GManGMale]

Thank you very much for the video, you made replacing this part extremely easy to do. 😌👍👍👍👍👍

[@amywillis4287]

Mine acts like it's shorting out, it works about once a week🤦‍♀️ so should I replace the battery and plug?

[@ftvideosandclips]

Aren't there clips underneath the front bumper too?

[@angelathomas6374]

I wish were here in Memphis, Tn.... I need mine fixed! Lord! Somebody about to rob me blind! Ugh! I like this video! Very, Very helpful! I probably can tell them how to fixed it!😂😂😂

[@Salty_reviews]

Wow who the hell at GM green lit this design?

[@tararogers8075]

Thank you Soo much

[@joeldelgado3316]

Man bro thanks for video...You got it

[@jordangrooms9605]

How much do you charge for something like this

[@rickyland1985]

Thanks man, just finished this thanks to your video and I've got to say that sucked 😅🤣😂 it really did, again thank you gringo garage!!!!!

[@carlvanover3296]

I have a passanger head light problem on a Chevy Malibu 2009 . i replacement on bulb and fuse and relay.

[@carlvanover3296]

I fixed both already and it still not working

[@hu70831]

Where is the best place to get those plugs? The dealership or any local autozone?

[@dfegan]

Read somewhere that it might be the relay in fuse box-low beam also act as running lights at 40% of normal power and bulbs aren't designed for this and cause a malfunction. Going out to finagle the headlight again( 4 times this year).....it ain't the bulb....duration of fix has been about 30 days......Use high beams to drive at night...no one seems to notice........

[@eloycvf7179]

Um belo trabalho. Obrigado por postar! Abs

[@chuyalmaraz578]

Awesome thank you for sharing!!!!!

[@drerodz]

I've replaced my headlights 4 times this year. Did the high temp wiring fix your issue?

[@jthan258]

me too whats up that!

[@Robsvo]

@@5150GringoGarage It's a faulty headlight/turn signal switch. Also they sell an entire headlight pigtail assembly for around $25.

[@HectorPerez-tb8hn]

for the H11 how do you assign pos and neg ?

[@HectorPerez-tb8hn]

@@5150GringoGarage well all I got was basically to follow the shape of the connector !! my replacement part are cheap as hell but it was my only option for now, I need to fix the headlights pronto !! thanks for the reply

[@dlr72587]

Sick 👌🏻👍. Tired of buying the whole harness Thank you

[@tq2953]

Great video. I have the same issues with my 2011 Chevy Malibu LTZ and changed bulbs on the driver side like 2x this year and realized the socket was melted. I installed new headlight socket and and spliced together. Hopefully this will solve the issues. Taking out the bumper 1st time two years ago was a pain in the butt. I did twice this year and now I can do much quicker than before.

[@Freesmoke300]

I’ll did this and it burned out within 4 months

[@DavidJuarez-fq5xs]

Where did you get the solder machine?

[@DavidJuarez-fq5xs]

@@5150GringoGarage do you know the name of it or price range?

[@ralphabreu5022]

I have a 11 Malibu Chevy how could you and why????

[@ralphabreu5022]

@@5150GringoGarage Nothing worse than plastic fantastic car's That's why I keep my 03 Tahoe body on frame And my 71 Chevy Impala that's a beast

[@jasongarcia1451]

Seriously. Thank you!

[@jamessalguero8961]

Did you make those sweet ass beats?

[@shane1489]

On stupid ass GM would build a vehicle where something that simple requires so much work.🤷‍♂️

[@likdz55]

Didn’t even show the install for the low beam🤦🏽‍♂️

[@jamess3109]

Good video. But what a pain in the ass just to change the headlights out

[@donnamyers3455]

You this look simple I'm about to attempt it.......

[@Anidraig]

I did it without extender.... freaking nightmare!!!!