It would've been very informative to show how you got the ball joint back into the knuckle before torquing everything down. Thanks for the video!
@Fwerks.1592 Жыл бұрын
I’m sorry, I’ll include that info on my next video! 😃
@RevolutionWaveEntertainment Жыл бұрын
Thank you, exactly what I was looking for! I have 2014 Nissan Rogue with that exact problem and I thought it was brakes and before buying any parts I took off the wheel and saw the brakes were still decent, but could be replaced I looked at the ball joints and tires and bingo that's where I was getting that noise grinding when we turned the wheel
@luiszelaya6299 Жыл бұрын
You make it look so easy. Thank you.
@Fwerks.1592 Жыл бұрын
Thank you!!!
@cber4851 Жыл бұрын
Fast and informative! Thank you for the blissfully short video.
@Fwerks.1592 Жыл бұрын
Thank you! I was getting bashed because how this video really doesn’t show step by step. That I should have not labeled it 8 min control arm removal! It honestly is a straight forward job!
@feletoa1047 ай бұрын
Straight to the point, keep it up and definitely appreciate your time for the resourceful content!!
@Fwerks.15927 ай бұрын
Thank you for the support!
@paulwyman1519 Жыл бұрын
Perfect video. Thank you!
@Fwerks.1592 Жыл бұрын
Thank you!!
@xaviervera9930 Жыл бұрын
Thanks for the vid bro it is a big help
@Fwerks.1592 Жыл бұрын
Anytime brother!
@kingdon9690 Жыл бұрын
Video should say showing how to replace a control arm shortened down tutorial
@Fwerks.1592 Жыл бұрын
I do apologize. I will take this feedback and make sure I give more of a detailed step by step on my next videos. Thank you
@kingdon9690 Жыл бұрын
@@Fwerks.1592 it's all good it was quite easy to replace
@evieemaya888 ай бұрын
Great video, how did u know itvwas the lower arm causing the tire wear?
@Fwerks.15928 ай бұрын
Good question!! The front suspension had a lot of play going through bumps! There are a few things that can cause bad tire wear issue. 1.bad tie rods, 2. Bad wheel bearing 3. A bad ball joint. In this case everything else was already replaced. Only thing left to replace was the lower control arm with the ball joint. That’s how I knew I had bad lower control arms.
@gamaliermelendez413611 ай бұрын
But good job.
@dad2ni Жыл бұрын
What is the “right height” when you jacked the arm assembly? Thanks
@cabrerazhumi8 ай бұрын
Ride height.. the ball joint, would be just fine. The other end also. Cuz there is no swibble, amd the front end, the same.. but hey he did it..😂😂😂
@gamaliermelendez413611 ай бұрын
On this particular vehicle, you just put the control on. You don't need to adjust the right height in order to install them. The butchings on this one is not sideways like the other vehicles.
@Fwerks.159211 ай бұрын
Thanks for the feedback! I’m used to working mostly on euros so I have this tendency to preload the suspension lol.
@cabrerazhumi8 ай бұрын
Facts..
@joatrating385 Жыл бұрын
How can you call that under eight minutes to change the control arm when you keep editing the video and then jumping back on after you’ve obviously doing work while the video is cut on & off 25 times!!!
@Fwerks.1592 Жыл бұрын
Thank you for watching. The point is showing you how to do it. Most of these diy have an idea of how to get things out or fix. This is not a step by step video.
@devinbrown9212 Жыл бұрын
Pretty sure he meant the video would be under 8 mins
@jcastellon04 Жыл бұрын
under 8 minutes take tire off😂😂
@morganmcclellan28757 ай бұрын
Can anyone tell me if the 2015 rogue would have 2 total control arms or 4? I was told I need to replace four and then got a second opinion where the mechanic said I only have the two lower ones!
@Fwerks.15927 ай бұрын
For this vehicle you only have the large lower control arm and the ball joint is built into it. So 1 control arm assembly, then you have your tie rod. Not sure what the first mechanic was talking about.
@jiga1655 Жыл бұрын
Bro u might as well have just talked the entire time without showing anything cause that's what you did in video format. We appreciate the thought but this is useless for someone trying to troubleshoot certain parts, video just jumps straight to you explaining the finished work
@Fwerks.1592 Жыл бұрын
Noted! “BRO”
@EpicBenjo Жыл бұрын
What star pattern?
@Fwerks.1592 Жыл бұрын
What’s the time stamp?
@omarcaban99177 ай бұрын
What brand control arms did you use and how are they holding up ?
@Fwerks.15927 ай бұрын
I used carquest control arms. They are ok no issues, front end sounds solid at the moment even after putting 15k miles. Dorman solutions is a better option in my opinion.
@omarcaban99177 ай бұрын
@@Fwerks.1592 Nice thanks ! How about the Delphi brand and experience with that brand
@Fwerks.15927 ай бұрын
@@omarcaban9917 definitely! I would have installed that brand instead of carquest! I needed the Arms in a pinch! I’ve use Delphi suspension components on my bmw!
@omarcaban99177 ай бұрын
@@Fwerks.1592 And how did they held up ? In the market for lower arms for my Nissan rogue and oem are so pricey
@Fwerks.15927 ай бұрын
@@omarcaban9917 they are still holding up good! Definitely consider the following brands, Delphi, Dorman, Mevotech or TRW!