2008 Mustang Bullitt FRP Ford Performance Intake 62 MM Throttle Body and Bama Tune Install
Пікірлер: 73
@jolliemark62943 жыл бұрын
I'm not to much of a mechanic but do appreciate your talents as such....👍👍👍
@N-Scale3 жыл бұрын
Thanks Jack , I love to tinker
@davestrains68163 жыл бұрын
This video brought back a lot of memories when I was a kid working on my Chevelle. Tons of fun. Thanks for the video I really enjoyed it.
@N-Scale3 жыл бұрын
Thanks Dave , I did too and same memories !!
@tanzj3 жыл бұрын
Mike , you are making me jealous. I used to have a 1966, 1969, and the 1990 25th Anniversary Mustangs, but sadly they are all gone. Have fun with your Mustang....John
@N-Scale3 жыл бұрын
Thanks John , Lots of fun so far.
@craiglordable3 жыл бұрын
Love the sound.
@N-Scale3 жыл бұрын
Me Too !!!!!!! Thanks Craig, Mike
@1WideRide3 жыл бұрын
Great tutorial 👍👍👍
@N-Scale3 жыл бұрын
Thank You Ed !!
@charlesmcclure59943 жыл бұрын
Great job Mike, once you get the exhaust done you will feel a great difference 👍👍
@N-Scale3 жыл бұрын
I only need the long tubes. Thanks , Mike
@bigsparky653 жыл бұрын
Duck tape works on everything, love the zip ties. Love the purrrrrr
@N-Scale3 жыл бұрын
Thanks very much Jeff. Mike
@JoeG-firehousewhiskey3 жыл бұрын
That's awesome that it worked out that well for you. I was thinking about putting a cold air intake and exhaust on my hemi to get some more power out of it
@N-Scale3 жыл бұрын
I would and I just do it for the fun of doing it !!
@mikecorleone67973 жыл бұрын
Ohh man.. I can’t wait to get my 62mm bbk throttlebody for my 2010 grabber blue gt.. i got my airaid cold air intake, my bama tuner and I’m replacing valve covers with blue ford racing ones and swapping out cam phasers and bolts while I’m in there.. also planning 40lb injector upgrade for e85 in the near future.
@N-Scale3 жыл бұрын
Cool , Good luck to you !!!
@Longshadowsmodeltrees3 жыл бұрын
Cool stuff, wish I was here to help. Brings back Hot Rod Days. Bob
@N-Scale3 жыл бұрын
Oh , I have fun with her !!
@Longshadowsmodeltrees3 жыл бұрын
Turning her in to a ticket machine....lol!
@N-Scale3 жыл бұрын
@@Longshadowsmodeltrees Well it may seem so , but I am generally a good boy. Mike
@Longshadowsmodeltrees3 жыл бұрын
If.....You say so.....
@michaeljohn7405 Жыл бұрын
I subscribed hey did you put the cams on there from ford racing. I’m doing the same thing cams intake TB PP heads with new rockers lash adjusters underdrive pulleys and some exhaust
@PeterCPRail87483 жыл бұрын
Sounds great and it looks like it runs great as well
@N-Scale3 жыл бұрын
It runs well for me !!
@PeterCPRail87483 жыл бұрын
@@N-Scale that's all that matters
@RonsTrainsNThings3 жыл бұрын
Interesting stuff, Mike. Looks like a fun drive.
@N-Scale3 жыл бұрын
Thanks so much Ron. Mike
@r2cool392 жыл бұрын
What's the factory throttle body numbers on the bottom of the original throttle body . I have the a 60mm installed from previous owner . He gave me a throttle body and I just want to see if it's legit .
@N-Scale2 жыл бұрын
Not sure as it is back on the car. www.americanmuscle.com/productphotos?webid=frpp-55mm-throttlebody-0510gt&showFeed=True&customerpics=false&index=0
@michaeljohn7405 Жыл бұрын
I wanna use all ford racing products only my coil packs can be from MSD cuz Ripp doesn’t make em for ford.
@ksokie633 жыл бұрын
Great video, looks like a nice ride 👍
@N-Scale3 жыл бұрын
Thanks so much !
@gerdeguelle19673 жыл бұрын
nice video and a great sound
@N-Scale3 жыл бұрын
Thanks Ger, I love the car. Mike
@DGModelworks3 жыл бұрын
VERY nice Mike!
@N-Scale3 жыл бұрын
Thanks Deryk, Mike
@DGModelworks3 жыл бұрын
@@N-Scale Close...Deryk. HAHAHA
@DGModelworks3 жыл бұрын
@@N-Scale I'm a Mustang man myself! On my 4th... 2017 GT
@N-Scale3 жыл бұрын
@@DGModelworks How did I do that ????
@N-Scale3 жыл бұрын
@@DGModelworks Nice. My next door neighbor has a 2009 500 and a buddy has a 2018 GT 350. They are fun cars !!!
@paulr13053 жыл бұрын
Mike a nice difference Lisa is sounding really good. Now you might want to consider a short throw shifter as I noticed night and day difference from the stock, it should have come factory with a short throw shifter and it creates a even bigger smile when rowing the gears and now no more missing 3 rd gear :)
@N-Scale3 жыл бұрын
Thanks Paul , I am considering that. Got a fav. brand?
@paulr13053 жыл бұрын
Hi Mike, I put a Hurst companion short throw shifter in my Mustang Bullitt only it has a annoying shifter rattle 2,500 RPM. to 3,500 RPM. there are two neoprene spacers I am going to try one and hope it eliminates the shifter rattle. Like the click between gears and it gives a classic look too. Ford makes one, Barton makes one, think a few more. I would find out if Hurst has fixed the shifter rattle issue. It's a nice shifter design and has adjustable shift stops so you don't damage if shift too hard.
@paulr13053 жыл бұрын
@@N-Scale Hi Mike I put in a Hurst competition plus short throw shifter with adjustable shift stops so if you shift too hard it won't damage, they make two versions competition and competition plus short throw shifters for Mustang and really like it, only there is a annoying slight shifter rattle noise between 2,500 RPM - 3,500 there is two neoprene spacers I am going to try one and then two and hope it eliminates the shifter rattle, like the click it makes when goes in to each gear and has a nice ohthentic look too, I think Ford makes a short throw shifter, Roche, Barton, maybe check if Hurst has fixed the shifter rattle issue first there is a noticeable interior noise too think it just needs some sound deadening. I just want you to know all that I have found out
@N-Scale3 жыл бұрын
@@paulr1305 Thanks , I was thinking Hurst or Barton. Mike
@paulr13053 жыл бұрын
@@N-Scale You are very welcome Mike
@flbizowner9384 Жыл бұрын
Sounds like you already had cams before this mod
@N-Scale Жыл бұрын
I have FRP cams BBK headers, MBRP Mufflers, Delete Plates, BBK Catted X Pipe, 62MM FRP Throttle body, and Aluminum FRP Drive Shaft. Thanks , Mike
@flbizowner9384 Жыл бұрын
@@N-Scale thanks for the reply Mike. I almost made the mistake of doing the intake, throttle body and jlt tune naturally aspirated only. Based on what I’m reading I would lose torque without pro charge.
@N-Scale Жыл бұрын
@@flbizowner9384 The setup I had was the best one with a Brenspeed tune. The Paxton has taken this car to a whole new level. Mike
@flbizowner9384 Жыл бұрын
@@N-Scale did you install a cam before you replaced the intake manifold?
@N-Scale Жыл бұрын
@@flbizowner9384 I did replace cams before I tried the FRP intake and the Stock actually seemed to work better , to me.
@randysrockandrollrailroad82073 жыл бұрын
😊
@N-Scale3 жыл бұрын
Thanks Randy !
@jamesburba19953 жыл бұрын
Fords are designed to break ! Get a Chevy !!! LOL
@N-Scale3 жыл бұрын
Every thing mechanical breaks , get used to it ! LOL