2009 Alfa Romeo Mito 1.4 L Petrol Clutch Replacement

07376369067
www.williamsmo...
Support the Channel Donate:
www.paypal.com...

[@gregreitan3634]

That's called "getting it done" no screwing around there. This guy has got to make $hundreds every day. I can't stop watching. Keep doing what you do man!

[@ojmbvids]

Just had to come back to this video and say thanks! Managed to do mine today but jesus you must have some muscles! I nearly had a hernia trying to lift my gearbox up and align it. Ended up dragging my knackered old engine hoist out from the back of the garage to do it!

[@ojmbvids]

Those driveshafts came out so easy. Mine were really stubborn.

[@colintx800]

Another brilliant video! keeping people mobile during CV19 👍 I think the exhaust flexi went for a walk lol. It was also nice seeing the owner drive it off 😁 Congratulations 10k subs!

[@goodo5691]

oh to be young again and be that flexible and strong:):)...i can remember having Cortina gearboxes on my chest in the driveway

[@Pilotechy]

Thank you so much for your video. Gave me the confidence to change one on my sons Mito. You made it look easy and to be fair, with watching you do it a couple of times, it was ok. Took me a bit longer than your 45 minutes... I have a lot of respect for you throwing the gearboxes back up into place! Donation sent :)

[@Aaron-cd7rx]

That motor mount is crying for help. Great work like always enjoy watching your vids

[@vaux_wolf4281]

Nice one Kev getting it done as usual. Those gearbox mounts top and bottom were completely shot. It sounded like an Impreza at the end 😂👍

[@euskapeuskie6875]

Trank you very much for this Video and putting the effort into cutting it! Was great to have as reference for a clutch replacement on a 2011 Mito 1.4 Multiair.

[@parteibonza]

Its so interesting watching these old videos - I am fascinated seeing how knackered these cars get. The roads in UK must be really bad!!

[@reecemorrison2599]

RIP flexi pipe 😔 great video 👍🏻

[@tonyrino6332]

RIP Italian car

[@oscarmontero5724]

Another video! Great!! Congrats on 10k subscribers!!

[@AgentFoxMulder1972]

he did so well without help to insert the gearbox!

[@MrDesmonick]

Superb video! My next job on the wife's car 👍

[@oscaramante5391]

Thanks for sharing mate. I have to do my mito 155hp with M32 box. Do I have to take off the bottom frame? Last time my friend and I took it off as there was no room to slide the box out. Thanks in advance.

[@demodansoundwavemusic9677]

good job bro, i think some commentary would have been good though, just for the hard to see or reach places to help

[@Aminhusam]

Hello ! I have a question and I hope you can help me solve the problem! I have an Alfa Romeo Mito 2011 1.4 petrol automatic gearbox and the engine was damaged and I had to change the engine and I bought an engine and we changed the engine but after changing the engine the transmission it does not work and when you put it in driving mode or any mode it crack a few times and then gives a signal of a malfunction in the gearbox. And when you do the diagnos, it gives you an issue in hydraulic system. Do you have any suggestions or idea about this ISSUE ? REGARDS

[@WMCS]

Yes. You need to re calibrate the module This needs to be done by a scanning tools.

[@Aminhusam]

@@WMCS thanks for the quick response ! I willy appreciate that . Rg

[@Antonio-ci1mt]

Good job ! What is the model please? alfa mito 1.4mpi78? 105? 150? thanks :)

[@marcelh2341]

Why do you grease the bolt holes?

[@paologub678]

bravo....!!!!

[@ymangatprov5932]

i have alfa 159 2.2 jts , is that same way to remove gear box

[@alfaman4113]

Did you remove the subframe?

[@westawesta9063]

Very good job 👍👍👍👍👍👍👍👍👍

[@klaus1599]

Very Good job👍👍👍👍

[@markmawson1]

1st

[@michaelwhelan564]

No stupid music, no pretense, no BS. FANTASTIC! WELL DONE

[@alessandrer3616]

The best mechanic in UK ! Thanks for sharing man !

[@michalesniewski3636]

Good Job Kevin ! How much time does it takes from start to finish?

[@BTJ76]

Very good job but please put that tyre on the back!!!!

[@stedavo811]

Can we have a toolbox/van tour please

[@MechaNick_]

Please do !

[@colintx800]

I don't think he should just in case some low life is watching.

[@stedavo811]

No One is asking you so go away

[@MechaNick_]

@@stedavo811 calm down please.

[@colintx800]

@@stedavo811 Would you show strangers inside your house? Your attitude stinks.

[@user-ox4eu3xi3s]

when adding gearbox oil ,while fastening the fill port you can see how easy that mount is moving about, looks like it needs a new gearbox mount, that engine is moving far to easy in that bay

[@tlacaelet]

Hi do you know how to adjust the clutch pedal position(the pedal feeling and the stroke are good) just the pedal position? After the change the pesar it’s too high in comparison with the brake and gas pedal

[@Rugcarl97]

I have the same problem! I have recently changed Clutch, Flywheel and the pedal pump. My car was leaking brake fluid because of the thrust bearing so i had to go through all this. After replacing Clutch kit, bearing and the Flywheel the Clutch pedal had a weird feeling and the gears went in worse! It felt like there was a Little more space to push the Clutch pedal and when i pushed really hard the Clutch It changed fine, real Smooth. So they bleeded the Clutch circuit but still had the same happening. In the end they told me that It was probably the Clutch pedal pump and now It shifts a little bit Better but still worse than before i did all this! Now After the new Clutch pedal pump installation I feel that the pedal itself Is placed higher and has a weird clearance , so that i can lift It up With my foot to Place it in the position It Is suposed to be. I am very confused , thank you in Advance and Sorry for my not perfect english. I really Need an advice. Lost already too much Money on this and i am very disappointed. (Car Is an Alfa mito 1.4 Multiair 135 2009) with 88.000km

[@mikeberry304]

Have done plenty of these on punto's , I usually change the clutch fork as they are made of toffee, the gearbox mount is knackered beyond belief, how could the punter be driving that like that , no front flex either, great job in the sunshine Kevin , I've been off for 3 weeks now , plenty of DIY at home , take care

[@paulb8916]

Great video I now know Im gonna pay someone to do this as it will be far quicker! It never ceases to amaze me how much hard work the designers make it to get at!

[@makedonac7]

Every Alfa Romeo is Rust

[@LiLCRiS1213]

Hello Kevin its same thing for Giulietta 1.4 ? 2011 please

[@a.k.g6152]

That’s great job but how much does cost to replace the clutch please

[@manusanchez1780]

Kevin muy buen servicio y muy profesional. Un saludo desde España

[@mig7287]

Este tío es una máquina, da gusto verle trabajar. Lo he tomado como mi gurú de mecánica y hasta tengo ganas de que se desgaste mi disco de embrague para cambiarlo yo mismo. Saludos desde Ibiza!

[@thisnthat4318]

Does anyone know how long it takes to replace the clutch?

[@bazasulli6127]

Well that exhaust flexy is well and truly had its day haha.

[@playazZ001]

You look like Virgil Van Dijk

[@SouL300TV]

Thx that would help me

[@alfa_demon435]

Ayy may need you for a giuletta for the same job 😂

[@InternationalBusiness]

Nice work

[@mariomarx7514]

Não trocou o calço do motor quebrado??

[@starskstarsk2682]

Good job m'y freind ++++

[@craigthompson1794]

Top job mate

[@SpoonersShed]

Brilliant. Great to to a professional at work, really enjoyed that video, thanks.

[@SpoonersShed]

...and two years later I finally changed it on my sons 1.4 Mito last weekend. Couldn't of done it without your video Kevin, brilliant. How you lifted the box back in I don't know..I had to jack it up with the help of my neighbour!

[@levibrunsdon9543]

grate video

[@gonzagnr2]

do a swift sport zc32s with the hydraulic release bearing!

[@WMCS]

Will keep that in mind .., is it your current vehicle ...

[@gonzagnr2]

@@WMCS yes, car is almost new, But i was curious about the procedure. Great videos btw. What's the líquid You spry to the flewheel?

[@joshualewis9890]

Life saver✌️

[@timbosinius3653]

Thank you for your excellent videos. About two years ago, I successfully changed the clutch on a Ford StreetKa based on one of your videos. Today I used this one here to start on my daughters Mito. Need to get e-profil nuts for the mounts tomorrow. Not clearly seen in the steps is if you removed the flex hose from the exhaust?! It is off as can be seen in some part and and I think it is required. Turned out to be the worst part due to rusty bolts Paypal donating is on its way!!!

[@deusexradio6943]

great

[@Rugcarl97]

I have recently changed Clutch, Flywheel and the pedal pump. My car was leaking brake fluid because of the thrust bearing so i had to go through all this. After replacing Clutch kit, bearing and the Flywheel the Clutch pedal had a weird feeling and the gears went in worse! It felt like there was a Little more space to push the Clutch pedal and when i pushed really hard the Clutch It changed fine, real Smooth. So they bleeded the Clutch circuit but still had the same happening. In the end they told me that It was probably the Clutch pedal pump and now It shifts a little bit Better but still worse than before i did all this! Now After the new Clutch pedal pump installation I feel that the pedal itself Is placed higher and has a weird clearance , so that i can lift It up With my foot to Place it in the position It Is suposed to be. I am very confused , thank you in Advance and Sorry for my not perfect english. I really Need an advice. Lost already too much Money on this and i am very disappointed. (Car Is an Alfa mito 1.4 Multiair 135 2009) with 88.000km

[@francy5287]

bravo!!!

[@aleksandar3788]

Gearbox back in its place in 2sec. Like a Sir!😎

[@WMCS]

That’s it. I’ve actually got a newer version of a Mito I’m working on tomorrow. They’ve decided to fit it with a DMF. it should be live on the channel this Saturday 🍻🍻

[@gabbiz9052]

What tipe of degreaser did you use? Come in tanks? I'm curius because i'm bored use spray can the end quickly

[@javieriglesias9849]

👍

[@matthollingsworth2245]

Very helpful indeed, just did the job, couldn't without this video. Thank you!

[@castrolgtx5064]

That Alfa is some bucket of shit. Fantastic video Kev

[@seba2681]

Hola Kevin los retenes no se los cambias? Perdía por todos lados la caja de cambios!!

[@gigikgigik9083]

Thanks for video car italian and for all do respect

[@VortechBand]

0:51 Driving with a spare tire? :)

[@johanreibestein4231]

also nice to see is the weather gets better , again great vid kevin

[@alexanderl4333]

On which car is it most dificult to replace the clutch?

[@AlexDan99]

Cracking job mate...a real pro at work.

[@Louis19-82]

Hi ! you are great but in this video Fiat always proves very bad unfortunately .. I wanted to ask you what brand of inserts do you use for the milwaukee .. congratulations again

[@WMCS]

Sealey pro impact sockets ⛽️

[@Louis19-82]

@@WMCS sealey good price / quality ratio! 👍🏻 we in Italy only beta and usag but they cost too much .. waiting for another video from you, I always follow you bye

[@juvenorbee]

Dear Mr. Kevin-Albert Williams! I'm not a mechanic, but I will try to do the same procedure on my 1.4 Turbo MiTo with the M32 gearbox here in Hungary. I can see that you didn't remove the subframe in this video. Did you ever do the same procedure on a turbo MiTo? If yes, then did you remove the subframe, or you can take off the M32 too without removing it first?

[@WMCS]

Watch Vauxhall Astra video. Same as your mito

[@juvenorbee]

@@WMCS Thank you very much. I think I already watched that, but now I will do it again. :D

[@juvenorbee]

@@WMCS You have a few videos, and in the 1.4L, you didn't take out the gearbox. Which one are you referring? :D Im actually replacing the gearbox, so I have to take it out.Will I have to release the subframe a bit, or take it off completely? And again, thank you for you answer, and your videos. Very helpful.

[@MechaNick_]

That car needs some serious servicing. Seems in bad condition. You only do the clutch??

[@jusb1066]

Needs an exhaust, even the spare was bald

[@bazasulli6127]

@@jusb1066 Needs an exhaust big time but i would disagree with you on the spare, looks like it has plenty of tread on it still.

[@jusb1066]

@@bazasulli6127 only in centre

[@marcelh2341]

And new gearbox/engine mounts, new tyres (he is using the emergency Tyre?) and a new alignment (look at the uneven Tyre profile), I assume many more things.

[@MechaNick_]

@@marcelh2341 "nahh ill just let the clutch be replaced and drive on"

[@talat03]

Bravo👍👍👍👍kevin bonne boulot

[@danielaraidy1295]

Ist the same thing to do in giulitta ?

[@WMCS]

Not sure. I don’t do all Alfa.

[@calladin3]

Why was half of the exhaust missing lol no way they been driving it like that good job though

[@andrewcdavies]

its missing cause it’s snapped....probably missing due to the worn out engine stabiliser.

[@calladin3]

Probably dint see that until I watched the video the gearbox mount is shagged.... But if they have been driving it around will sound like a tank

[@Malossianoplus]

He will pass emission test with no emission.. lol

[@calladin3]

@@Malossianoplus every time 😂😂👌

[@shinobi6211]

Hello! How many Times for this opération ? Good job👍👍👍 ,hello from France.

[@pft4life]

Hi there, great video, thumbs up. Question: I replaced the clutch on my Giulietta from 2011 and now when I steer to the right or left there is cracking, scraping sound. This is also when the engine is turned of and when turned on. Do you know what the cause can be? A mechanic told me it is the left strut, but it happened directly after the clutch replacement...any ideas?