6 years and still helping! Got a new-to-me '09 Civic with the 'D' and 'D3' lights dead. This was everything and make it all easy knowing exactly what to expect, do, and buy! Thanks!
@MugenMike2156 жыл бұрын
This was very helpful! Great video 👍🏻
@StumpyBuilt866 жыл бұрын
Glock23likeMike thanks. Im glad it helped
@ganyuotaku Жыл бұрын
I'm so doing this now!
@Zavi.1114 жыл бұрын
Good video! Really helpful and informative!!!
@StumpyBuilt864 жыл бұрын
Glad to help
@adamwoltz22286 жыл бұрын
did my 2011 si also red easy! now the top to do. each light up block for the clusters temp and coolant are individual leds I am guessing.
@StumpyBuilt866 жыл бұрын
Adam Woltz those would be a back lit led screen. Not individual leds.
@billyeason98994 жыл бұрын
The denso and NR speedometers are both lcd backlit screens, the si has clear screens with white and reddish orange leds, the nr sedan speedo has white leds behind all gauges.
@josuebello88892 жыл бұрын
Donde consigo el diagrama quisiera ver si puedo ponerlo en un civic 98
@markperez64386 жыл бұрын
Hi bro, thanks for your DIY video. I got little problem on my lower cluster lcd. the last digit on the right side was gone after a while and now totally black only the last digit. please need your advise. cheers
@StumpyBuilt866 жыл бұрын
Mark Jayson Perez it sounds to be either the board or the lcd itself. But if its a lighting issue id start with the board
@markperez64386 жыл бұрын
I tried searching for the replacement of the LCD only but can't find it. Maybe you know where i can purchase online. thanks
@StumpyBuilt866 жыл бұрын
Mark Jayson Perez your only really going to find those in a spare "junk" cluster
@Boota_Q85 жыл бұрын
@@StumpyBuilt86 as i got one from the junk yard
@markperez64385 жыл бұрын
@@StumpyBuilt86 hi Bro i need help my stepper motor is flicking do u know how to fix it or where to buy the parts?
@Boota_Q85 жыл бұрын
very helpful video bro thanks alot 👍👍
@StumpyBuilt865 жыл бұрын
No problem. I know some people dont like the orangish cluster colors. So if people are feeling brave they can do this themselves.
@Boota_Q85 жыл бұрын
i Wish to change but i cant find the lights..plus i try to clean and guess what the RPM niddle came out hehehe
@williamyocum47743 жыл бұрын
Nice and informative mod video. Tried it, and worked great except for the fact that now the bottom row of led's that display my odometer, trip, and temp don't display at all. Any ideas?
@StumpyBuilt863 жыл бұрын
Could be a few bad leds. I order them by twice the amount i know id need. Even though they are cheap. They can be slightly inconsistent
@williamyocum47743 жыл бұрын
@@StumpyBuilt86 they were working just fine. Didn't even touch those led's at all.
@Andre63033 жыл бұрын
Need some help with my cluster the back lighting only works intermittently and keep hear a tapping noise at times
@StumpyBuilt863 жыл бұрын
A tapping noise? Does the needle function properly?
@nardofd1 Жыл бұрын
What specific type of LEDs are these?
@StumpyBuilt86 Жыл бұрын
Plcc-2 got them from Lighthouseled
@davidalvarenga93495 жыл бұрын
Where is the dash ligth fuse?
@StumpyBuilt865 жыл бұрын
I would check the manual for that information.
@davidalvarenga93495 жыл бұрын
@@StumpyBuilt86 thank you
@luismedina62766 жыл бұрын
Hi, I have an issue with my 2008 Honda Civic cluster. The cluster and other car panel lights, as it can see from the video ==> kzbin.info/www/bejne/amHJZJefl5eSiLM, are flickering. A mechanic has recommended replace the cluster to solve the problem. I´m not sure if that is the right solution since other panel lights like radio and gear shift stick lights are flickering too. The car exterior lights do not have this issue (they operate as usual, I mean they do not blink). Any suggestions to solve this problem? Thanks in advance.
@StumpyBuilt866 жыл бұрын
luis medina could possibly be a bad ground somewhere. Without diagnosing the vehicle itd be hard to determine what the issue is by a video. I apologize
@luismedina62766 жыл бұрын
LOLIFE2010 Thanks mate for your time to help me.
@StumpyBuilt866 жыл бұрын
luis medina sorry i couldnt be more help
@SarcASSticMOFO4 жыл бұрын
omg don't ever do the second way unless you are removing a light you most likely don't ever want to work again underneath those 2 bumps of solder you pointed out there are 2 gold connectors that are built on the board during manufacturing if they are pulled from the board then it's over there isn't a good fix for replacing the gold pads.
@StumpyBuilt864 жыл бұрын
Ive done 25 of these civic clusters in the last year. I have had zero issues with the way i do it
@SarcASSticMOFO4 жыл бұрын
@@StumpyBuilt86 I wasn't trying to say that you are incompetent but someone that has never done this before if they don't do it slowly and with care will remove those connectors that are built into the board and it will be something they can't fix.
@StumpyBuilt864 жыл бұрын
@@SarcASSticMOFO thats is very true. I didnt mean for my comment to come off as an asshole. Its hard to tell over the internet.