You saved me a lot of time by listing the socket sizes and torques! Thank you for this thorough instruction!!!!
@rltkktlr2 жыл бұрын
Thanks Rogue 2. I’m glad it helped you. Let me know if I can be of any further help.
@dancurrier64214 ай бұрын
Hello I have a 2016 Chevy Traverse Lt AWD and I have a problem with my service traction control and stability lights on the dashboard, changed my wheel bearing and then it says now the dash AWD service system I'm going to change wheel speed sensor any help would be appreciated ty
@brandonwarner28812 жыл бұрын
FIXED! My 2014 gmc acadia slt was showing traction control off and service stabilitrak after just a few mins of driving after about 35mph if I accelerated more than 1/3 throttle the truck would cut power in quick intervals making the drivetrain shake hard. So after finding that my brake switch sensor was always triggering the lights to be on and it had to do with the slack that built up over the years in my brake peddle... changing the sensor wouldn't fixed the problem... so I added a small piece of plastic to the sensor to fix the problem. I've been driving it alot over the last few weeks with zero problems! Hope this helps someone.
@jessledesma90092 жыл бұрын
Gvvgbbhbbbbbb3uuuuuuuuuuuuuuuuuuuuuuuubddñn
@george_perez10 Жыл бұрын
I went thru the same problem on my GMC terrain 14. I change the brake & rotors. Once I put it down the ABC & stabilitrak came out. I didn’t know what was wrong with I check sensors & they were all good change the lower control arm still there. Later, I found out it came out because it was a little bit out of alignment. So I had to change front tires & get it lined up & everything is fine! So y’all make sure your guys it’s alignment first It’s okey to ask people around.
@kevystead2 жыл бұрын
Thanks for posting this. I'm having this problem with my 2013 Terrain. I can't fix it myself (Condo Rules) But knowing what it is will help. I can most likely get the part cheaper than the mechanic.
@rltkktlr2 жыл бұрын
Hi Kevin, thanks for watching, I’m very happy with the brand of parts. Some Mechanics won’t put on your part, most will but won’t Warranty the work. Hope you find a good Mechanic. Let me know how it goes and if you have any questions.
@kevystead2 жыл бұрын
@@rltkktlr Diagnosed today, Wheel Bearing Hub Assembly. Not an urgent fix. But I will have to get it done before winter. Quote was around $500 all in. *$300 for the part. Rockauto has it for $180!
@blesdavis76372 жыл бұрын
what is condo rules
@rltkktlr2 жыл бұрын
@@blesdavis7637 I have a buddy in a condo, sounds like Kevin might have the same association rule, unfortunately they don’t allow any maintenance in parking lot or garage.
@kevystead2 жыл бұрын
@@blesdavis7637 Can't work on car due to potential mess.
@mariscal0124 Жыл бұрын
Thank you
@rltkktlr Жыл бұрын
You're welcome, glad it helped you out
@noro3053 жыл бұрын
Getting ready to do this on my wife's 2014 Terrain. What was the cost for the hub assembly and did you use Moog?
@rltkktlr3 жыл бұрын
Hi Norm. I use 1A auto. Free delivery and I have had good luck with the parts. Let me know if you have any question. I have a link to the part, you can verify your model and year. $75 is what I paid.
@lewgarrickthe3rd5492 жыл бұрын
I had all 4 of my brake pads replaced, and my 2 front wheel bearings replaced. The ABS light is still on, and I can feel a slight slip at times when I am braking, even after all the repairs. I've paid about $700 in repairs for all that and the ABS light and traction light are still illuminated. What else could it be? Someone mentioned that maybe the rotors need to be changed, but I need a clear answer, before I pay that money, and still have this issue.
@RusBerry2 жыл бұрын
When I turn traction control to off, it drives fine. Otherwise it goes very slow.
@rltkktlr2 жыл бұрын
Hi Russ. What warnings do you have on the dash?
@RusBerry2 жыл бұрын
@@rltkktlr all wheel drive off
@rltkktlr2 жыл бұрын
@@RusBerry so even after you turn off the stability track, you still don’t get the stability warning light? As far as I know this warning light should come on with a failure to warn you of a stability problem. I would still start out by scanning the computer with an abs scan tool. If you don’t have one most auto parts store should be able to scan for ABS problems. That should tell you where your problem lies, ie a speed sensor failure will shut down the all wheel drive and the stability track system. Let me know what you find.
@RusBerry2 жыл бұрын
@@rltkktlr so I start to drive, it has almost no acceleration with the sliding car light. It will then say all wheel drive off. At that point, I turn off traction control and it will accelerate like normal. But have to go through that every time I come to a stop.
@rltkktlr2 жыл бұрын
@@RusBerry gotcha. Yes I would definitely scan it and find out if it indeed shows a speed sensor failure and which wheel. There are some other components that can fail that just effect the traction system but a scan is where I would start. Just remember the scan tool has to be capable of reading ABS CODES.
@Ra3Rae2 жыл бұрын
Thank you ❤️
@rltkktlr Жыл бұрын
You’re welcome
@ethan2fast1492 жыл бұрын
can you drive without the speed sensor/speed sensor circuit working?
@geoffmetituk36042 жыл бұрын
I have a 2009. Could this also be my problem???
@rltkktlr2 жыл бұрын
2009 was the end of the 1st generation, with the 2nd generation they offered the 2.4 L engine option. Too answer your question the ABS system is pretty much the same I believe. So if you have the same symptoms, scan the system in the same way to determine which one is bad. Let me know if you have further questions. Thanks for watching
@icebergslim2k3 жыл бұрын
Did that fix your problem? I have a 2011 Equinox getting the same error.
@rltkktlr3 жыл бұрын
Hi Kevin, this was actually the 2nd time I have had this problem. First time front right wheel, this time front left. Both had same issue, speed pickup ring on the hub was cracked and part of it was missing. Seems to be a common problem on the Equinox. Let me know if you have any questions. Pretty easy job, the hard part is getting the hub off.
@ernestdamo6772 жыл бұрын
Please i have Chevrolet equinox with code C056D, control unit hardwares malfunction, please what does it mean
@allie17642 жыл бұрын
Could these lights turn on due to a bearing issue?
@rltkktlr2 жыл бұрын
Yes, if the Bearing goes bad, it can damage the pick-up for the speed sensor. The hub assembly includes the bearing.
@allie17642 жыл бұрын
@@rltkktlr thank you! My friend is coming shortly to plug it in. :)
@rltkktlr2 жыл бұрын
@@allie1764 great. Let me know how it goes.
@allie17642 жыл бұрын
@@rltkktlr it's the front left bearing. Getting it fixed tomorrow! :)
@matthewedelen63542 жыл бұрын
Would this make the car shake?
@rltkktlr2 жыл бұрын
When you use the brakes? Mine didn’t shake with this issue. I have had a shake, was related to warped rotors.
@matthewedelen63542 жыл бұрын
@@rltkktlr happened off and on just replaced rotors today still need to fix the other issues
@rltkktlr2 жыл бұрын
@@matthewedelen6354 let me know if I can help with any questions, especially if you have the ABS, Stability warning lights on.
@faithkipper75492 жыл бұрын
Would this be, the same on a Chevy Traverse? It's a 2011
@rltkktlr2 жыл бұрын
Should be the same 2010-2017 model years.
@faithkipper75492 жыл бұрын
@@rltkktlr thank you!
@rltkktlr2 жыл бұрын
Best of luck, if you have any problems let me know.
@faithkipper75492 жыл бұрын
@@rltkktlr I definitely will!
@Max-kn9yi11 ай бұрын
Can I drive it with this issue?
@rltkktlr11 ай бұрын
Hi, I would not, losing them speed of a wheel just affects so many of the systems. Depending on road conditions it can become dangerous, as we are all used to these systems working. Let me know if you have any questions. I’m also going to link a inexpensive scanner that scans ABS components
@johnbradley5108 Жыл бұрын
My mechanic is telling me its my ABS pump and module is bad .
@rltkktlr Жыл бұрын
Well if you have the symptoms I have shown, it’s more then likely the hub bearing. Been a problem on this vehicle. 5th one I have seen. I’m pushing for a recall. Let me know why he thinks that? Did he scan it?
@mwadjumamukamfizi2216Ай бұрын
This is my problem
@rltkktlrАй бұрын
@@mwadjumamukamfizi2216 Let me know if you have any questions. A hub puller will help. With the number of Equinox I’ve seen with this problem, I’ve bought a hub puller and plan to update the video the next time I get another into the shop.