2010 Ford Escape Rear Sway Bar link and Bushing replacements

[@expoxur3648]

If you’re doing sway bar links at home, it’s actually easier to change them with all four wheels on the ground if you’re able to. It keeps them at the ride height instead of flexed out with the suspension. Makes it easier to remove and realign them when it’s going back together.

[@Jon_2218]

Thank you for this complete video instruction repair.

[@tamarabomia3820]

Thank you for that info. I was wonndering about that

[@SpikeGABeen]

Thank you! Seeing how you deal with problem was great. Like when the wrench got stuck while removing the bolt blocked by the differential. Very good to see how you work with those problems

[@r.i.a.n.63]

Thanks for the video. Small suggestion, add the torque specs to the notes for those of us who like to be more precise.

[@jamesrichardson771]

Wow💥 Very Nice, 15mm wrench !!! 🤗 🛠

[@Jon_2218]

Thank you for your complete video instruction repair. 24:28 timeline.

[@kristalandales7676]

Nice one kabayan mabuhay! Thanks for sharing how to removed the rear stablizer bar link and install the new one...now i hav the idea how to install it..i hav a ford escape 2012 same problem.

[@jamesrichardson771]

Can you do this' job with the wheels on the Car. ??

[@redihoxha2940]

Can't take the sway bar links without unmounting sway bushings?

[@wongautofix5680]

Yes u can

[@redihoxha2940]

@@wongautofix5680 yes I did it 😉

[@erick669247]

Excuse me, do you know if the 2010 Ford Escape has a gasket for the rear differential? Or just gasket maker? Thanks.

[@MVMTV4Videos]

don't know if there is a gasket i should have checked before i did it. the gasket maker started leaking after i tried ti fix it

[@Rumrat]

Very helpful, thank you:)

[@dongseokmoi2790]

Ford Escape workshop manual says that NOTE: Make sure that the component is clean, free of foreign material and lubricant. At 17min. 22sec., is it Ok to apply a lubricant on them?

[@wongautofix5680]

Yes is ok,

[@MVMTV4Videos]

TY VERY MUCH. YOU DID A GREAT JOB. WELL DONE THUMBS UP. NEW SUBSCRIBER. I have a 2010 Ford escape ans doing the front sway barr links. I hope i don't have to do the back ones.

[@steved8714]

Be careful lubricating any bushing, they're not designed for petroleum based lubes and will swell, it will drastically shorten the life.

[@mravocadoman2904]

Probably should try using a silicone based lubricant or white lithium grease, no?

[@alstevens44]

What's the parts #

[@nolangietzen4668]

Luckily mine is only fwd no differential in the way

[@mravocadoman2904]

I was thinking the same thing 😂

[@jeffharrison7003]

He just tightens link with one wrench . I guess he no care about ball joints.

[@jeffharrison7003]

Voice too quiet

[@zoborzo]

No way this job takes an hour

[@steved8714]

No, if it's clean under there, probably 20 minutes.