2010 Ford Fusion Spark Plug Change

[@Foxbodyguy91]

PRO TIP, when starting a spark plug, turn it a time or two counter clock wise until you feel or hear it click. Then start tightening it. Prevents cross threading.

[@limbsflailing4479]

"Light coating" of anti seize (proceeds to put glob on). Good video. Thanks

[@pierreverdoni]

Would like to see how much peanut butter he puts on his toast LOL!!!

[@robertingalls2676]

@@pierreverdoni no need to scream “lol” at him

[@normbaxter9661]

Your video save me a lot of money. Very clear and helpful.

[@jonathanharmon4372]

Glad it helped!

[@rgruenhaus]

wish I could find a video showing the plug replacement for a hybrid. There is a bunch of stuff over where the plugs are.

[@robenglish8090]

Some facts-That is a spark plug socket not an adapter. It is a 5/8" socket in 3/8" drive. Don't use anti seize. An opinion-don't use a hammer and a vise to close a large spark plug gap just tap in on your work bench or a solid clean surface. Also agree with the iridium warning below

[@mjmiller1511]

Never start a plug with a wrench. One thing my father always taught me. Always tighten by hand

[@supermanfan8954]

Same here

[@pierreverdoni]

me too

[@keithnorman4985]

Exactly

[@drdrill101]

whats the spark sireal number to use in fusion 2.5l petrol

[@girlfriend5295]

When he takes of bolt he says its 10mm but when he puts it back on, he says its an 8mm. How did he get that bolt to be smaller just by taking it off?

[@MrAhgohgoh]

Thank you. Good video great commentary. Am i the only one to think that's too much anti seize?

[@jonathanharmon4372]

It was a bit much ill even admit.....

[@88BassAddict]

yea I thought he was gonna stop the first brush

[@faygo19]

Nice video I would not recommend anti seize on your lug nuts though.

[@gordonno11]

That was enough for two 8 cylinder engines!!

[@Mori_Arti_916]

Whats the torque specs for the plugs?

[@wquez98]

I was about to change my spark plugs, but when I took the boot out, there was a bunch of oil in there. I couldn’t even see the spark plug. What does that mean?

[@salaciouscrumb9443]

You have a leak in your valve cover, causing oil to go into the spark plug well. Order a new gasket and install it yourself. There is a great video on how to replace it, I'll post the link.

[@salaciouscrumb9443]

m.kzbin.info/www/bejne/j17EhJaurtBqpq8

[@elmosgottagun3152]

Definitely a valve gasket cover leak ...honestly a cheap repair

[@fernandomanueljaurrieta450]

Same thing with mine. So It's best to just put the boot back in until that gasket is repaired right?

[@keithnorman4985]

I had the same issue but I changed my valve cover and it fixed the leak

[@barrerasa94]

Should you replace the boot while youre at it or is it not necessary?

[@soccerharms]

I don't think it would be necessary unless you see significant wear on it or if you have issues after the new spark plugs are installed. However, isolating the issue to the boot would be a difficult diagnosis in the garage.

[@hot2handle520]

So we want to start from driver to passenger? Or it doesn't matter?

[@soccerharms]

It doesn't matter at all.

[@andyshay1385]

Thanks for the video.

[@ricardorodriguez7377]

Andy Shay thanks I was able to do it myself

[@stevecollinsjr3732]

Dustin is Wright you need to start it first with your fingers and I wouldn't use that ratchet to tighten it tighten the spark plugs with your hand and i wouldn't put that stuff on mine spark plugs because heat from the motor will make it cease to the block it's has happened to me before and it was the same exact thing you got in your hand

[@Foxbodyguy91]

I didn't know duracell made automotive batteries.

[@soccerharms]

Yeah that one worked well, just replaced it but got 5 years out of it

[@rickyterbovichjr.3149]

Anti seize is bull shit. Every time I use it on a bolt or somthing it seizes. Never a spark plug.

[@martinnezjavier]

Heavy coating

[@lunacallie6858]

Wayyyy too much antiseize😂😂😂😂😂