HOW TO CHANGE SPARK PLUGS FORD FUSION 2011

please like this video :)
Facebook: / ghostlyrich
Twitter: / ghostlyrich
Hope this tutorial helps you change your ford fusion spark plugs easily and quickly. Thanks again for watching the tutorial and i hoped it helped you out

[@jovib69jb]

Also if for some reason the oil filter does not turn easy to take it off then USE SAND paper to grip the filter ! 👍Food for thought ☺️

[@stevenhaff3332]

Really enjoyed your video. Great tips and I love your attention to detail.

[@richardhenderson7329]

This video Helped out a lot :) you explained every step.

[@victorlaguna9003]

Great detailed info., thanks for making this video.

[@khdaniely]

Excellent video thank you!

[@zachariahjohn4040]

Thanks pal. Helps big time

[@1aaaa1991aaaa1]

Thank you very much bro for this vid 👍❤

[@allenhall2259]

thank you for showing this video

[@charlieclingan9273]

Conductive grease is dialectric grease and it goes on the tip of the plug the coil goes on and antisieze goes on the threads and nothing goes on the white shaft of the plug. There is a possibility that someone pressure washed the engine and got water in the spark plug holes seen it a hundred times! Good video

[@zedwpd]

Dialectic grease is NOT conductive. It protects from corrosion. If you have a weak electrical connection, using dialectic grease can weaken it even more.

[@oscardanielflores4376]

Really good video🤙🏼👍🏼

[@kenrickparam5225]

Great video it save me some cash do it myself thanks ......

[@jordangirtz7139]

just curious to know to know if the 20 lbs of toque is a rule if thumb or specific to this spark plug change?

[@derrickschill1523]

what is this issue if pull the plug boot and plug out and you find oil on it is that mean you have to replace the valve cover gasket ??

[@letthemponiesrun]

You have sooo many hands! haha jk! Good vid....I nearly cried once on a 95 eagle talon.... I discovered what a helicoil was.

[@scottgiller7504]

Dielectric grease Not on threads on tip only! Anti-Seize on threads! NEVER USE AUTOLITE IN A FORD ALWAYS USE MOTOCRAFT PLUGS!!!!!!

[@SokoWaves]

I was thinking the same. This comment should be pinned

[@shday4]

I wish I read this before I followed the video 😭

[@toofancyjr4700]

I'm a rookie apparently. What's wrong with using Double Platinum Autolite plugs in a Ford Fusion?

[@gregorytolson4621]

I think you got the dielectric grease wrong. You use it on the white shaft of the plug, not the threads. You should be putting antiseize on the threads

[@RETCHED-METAL]

Yes good one cheers mate

[@rgruenhaus]

Was there a cover over that area that you removed already? I have a fusion hybrid

[@scottwolff6753]

Not for the standard 2.5L I4.

[@jimrossmeissl2726]

Robert, did you change your plugs? Any issues? I have a 2011 Hybrid, and the manual says for spark plug change, see dealer.

[@rgruenhaus]

After the first one you said do the other 4! Is it a 5cyl? LOL

[@AngelSantos444]

Anyway you could link what spark plugs , and coils to get?

[@ghostlyrich]

If I were you look up rock auto. You can put in your vehicle make and model and year. Will give you part numbers and everything. I like to buy spark plugs usually local and open them at the auto parts store just incase one of them is busted in the package. I NGK makes good coils and plugs. Bosche makes wicked plugs to. Iridium plugs are more money but last longer

[@lexm5871]

Do not put Dielectric grease on the threads. It's an insulator, and the plugs need electrical connection at the threads so the spark will occur.

[@unitedwestand5602]

I thought the torque is suppose to be 106 inch pounds which is 8.83 foot pounds not 20 🤔

[@meleciomeza1109]

Hey everyone actually had a question I have the same car from the video can someone kinda give me some insight on a problem iv bin having with the idle while Parked , driving and in reverse just gets kinda shaky at times when I first got the car it never did that it currently has 124081 miles on it

[@ghostlyrich]

Shaky can be allot of things, for maintenance if you haven't service the transmission fluid, airfilter check, throttle body cleaning, new spark plugs. Those would be the biggest ones I would tackle. But back and forth chair can be bushing and other parts that have worn over time

[@bkinggraphy]

He didn't do the ones in the back....the vid was going great

[@bisweed1633]

Theres only 4 sparkplugs for that v6 car ?

[@racingbeats1493]

there's a 4 cylinder model

[@kalebgebott7044]

Actually it does matter that they go back where they came from

[@bucwildwr8]

20 Ft lbs or In lbs?

[@unitedwestand5602]

Brandon Perkins specs say 106 inch pounds (8.83) not 20 foot pounds....

[@bucwildwr8]

@@unitedwestand5602 I thought that sounded high. Thanks.

[@bobrunge7594]

Ought to try changing spark plugs in a 3 liter Fusion. Pain in the butt. Have to take off the whole top of the engine intake manifold to get the 3 in the back. Another money saving idea from Ford. Remember... Ford has a better idea.....

[@danbytp]

Can I throw a hussy fit instead of crying?

[@mystified1429]

Get the araldite out and glue the plug into the stripped hole - then sell the car !

[@PROPMONEYTV31]

Mine not coming out

[@erichn4291]

Never put dielectric grease on the porcelain the spark will follow it to ground. Use copper anti seize and very little. It can give you a check lite because it can block ground.

[@chickemtruck9500]

clean your nails plus plug sockets are also magnetic to

[@lexm5871]

Those nails!

[@joehyundaitech7961]

use Motorcraft plugs only they do not cost that much more and they are better than Autolite. also change them every 60 k not 100 torque on the plugs is not 20ftlbs

[@turbocarfast5588]

You talk to much

[@dtaylor224]

It's called tutoring rudeness 😂😂😂