2011-2015 Chevy cruze, sonic Intake Manifold Repair.

The Dealership don't sell this part separetelly, need the full intake manifold and dealership sells it for $800.00+.
I drilled a hole thrue the ball joint, and intalled a cutterpin to keep the pin from coming out.. And. This saved me $800 plus labor..
HERE ARE THE PINS I GOT TO REPAIR T HE MANIFOL.
amzn.to/2ldBZtR
amzn.to/2mIat8n
amzn.to/2lb1ZWT DRILL BITS.
amzn.to/2l1tG4B. Intake manifold

[@raheemoneal9646]

I just bought a 14 Cruze for $4k and it has this issue. I honestly can't believe GM designed the manifold like this and expect people to pay so much money to fix it. Thanks bro. I'm gonna see if home depot got any of those pins.

[@CyberSkate]

i have a 2013 Sonic LTZ with 1.8 l LUW engine, with this same problem. Thanks for making this video you saved me alot of money and time.

[@lightstrongcreations]

Great job 2900i paid for mine and I am going to do this 💯

[@Nabbs07]

Should specify in the description that this is for the 1.8l. I specifically searched KZbin for info on my 1.4l Sonic and this still came up in the results. Spent a good while wondering what the heck this part was.

[@luisbravo9095]

Thank you, that was the issue in my car.

[@cazadordeadrenalina2161]

Please like and subscribe.

[@johnquiroz904]

How did you take the part off.

[@PSPLORDSHIP]

U figure it out?

[@str8Guttermusiq]

In this video did you take the manifold off?

[@lightstrongcreations]

I bought entire manifold used for 80 .... Gonna still only replace this

[@luisvilla799]

Bro they actually have the arm on Amazon now change the arm first before anything

[@ericsevilla3702]

@@luisvilla799 whats is it called so I can order it on Amazon?

[@KitchenCartel]

I super glue it together so far it’s been working

[@luisquintero8260]

Is it still working

[@KitchenCartel]

Yep did a filter change oil change still going good I have the new manifold also so when this one goes and no longer works I’ll be ready to swap the super glue gave me enough time to save up and I won’t switch the manifold till the super glue stops holding up

[@KitchenCartel]

Luis Quintero might evan just put the pin in my new manifold before i use it but so far the super glue been holding up well

[@luisquintero8260]

It still swivels

[@KitchenCartel]

Luis Quintero when I touch it it feels stiff to me like it don’t swivel so idk but hasn’t disconnected

[@LowVlogDrives]

On my car, the arm is good but the bottom part of the arm is not attached. The piece the arm connects to is missing. What is that called? Thank u

[@toxicpuma21]

Any luck on answers?

[@luisvilla799]

www.amazon.com/intake-Manifold-Tuning-Runner-Repair/dp/B08G9YPW8K

[@sharonlopez8728]

how did you take the wire harness off

[@MasQueAutosRD]

Hi, can you tell what are the symtoms when this part is broken?

[@jokerg4134]

Thxxx u buddy

[@ozzygallegos8487]

Hi, my main question is, how did you remove the small arm ? I have the new part coming in in a few days but i see the small arm has like a small lock washer or not sure ?

[@blackshirtavenger8665]

The small arm just pops off so there's nothing holding the arm to the main runner control actuator. What holds the arm to the body is the arms round ball at one end which pops into a socket on the actuator. This arm is infamous for popping off & causing the check engine code P2076 to come up. The arms ball wears down over time too which is why you see this guy in the video drilling a hole for a pin so that the arm doesn't pop out any more. FYI they also sell arms on Amazon or ebay for around $10 which has a brass head instead of a plastic one which will last longer. Hope this helps.

[@187WCB]

i struggled a lot with that one but it turned out to be pretty easy, that lock washer just pops off with a small flat blade. It ended up going under the car somewhere and I didn't reuse it with the new one, should've been a c-clip, lot of bad design on this car.

[@mikepruett1745]

my part works when u accelerate and goes back at idle but i still have the code

[@jesuschristislord9150]

Matthew 6:19-21 NKJV "Do not lay up for yourselves treasures on earth, where moth and rust destroy and where thieves break in and steal; [20] but lay up for yourselves treasures in heaven, where neither moth nor rust destroys and where thieves do not break in and steal. [21] For where your treasure is, there your heart will be also.

[@mikepruett1745]

parts stores have the arm how bout the motor ??

[@bobbyjohnson8437]

Hey where did you buy the pins from?

[@rhondatoledo8319]

I am currently having this problem with my 2014 Chevy Cruze. We managed to screw the bottom end of the arm, but the top end of the arm at 0:49 could not be drilled and pinned because the whole intake manifold had to be dismantled so we stuffed the top ball joint with aluminum foil and seem to work for a few days. However, the top end of the arm popped off again this morning. Does anyone know another way for the ball joint to stay in place in the top end part? I read some people glue it, but the ball joint needs to move freely. This is so frustrating.

[@isaiahmusa4060]

Pro tip : watch series at InstaFlixxer. Me and my gf have been using it for watching loads of movies lately.

[@maysonnehemiah8397]

@Isaiah Musa yea, been using instaflixxer for since december myself :)

[@westongenesis7007]

@Isaiah Musa Yup, I've been watching on instaflixxer for since november myself =)

[@bradyzion8041]

@Isaiah Musa Yea, have been using InstaFlixxer for since december myself :D

[@leandrodominic5822]

@Isaiah Musa yup, have been watching on InstaFlixxer for since december myself =)

[@stevenstone6451]

How did you remove the 3 torx screws to get the part off. The bottom screw looks hard to get to, not much space. Please let me know, thanks.

[@FE428Power]

A JEGs screwdriver with interchangeable tips. Made it easy

[@PSPLORDSHIP]

Can U do a video how to get the part out?

[@KitchenCartel]

I need this so bad but I’m to slow to do any of this your doing hahahaha

[@UncleRob21]

Where did you buy the arm from?

[@cazadordeadrenalina2161]

Academy

[@mikepruett1745]

saw it at oreilleys

[@jonesfamily3751]

My 2014 cruze arm broke just like this. Does this really work

[@cazadordeadrenalina2161]

That pin will never brake and will never come off, if you do it properly.

[@jonesfamily3751]

@@cazadordeadrenalina2161 thank you so much for the help. Im getting right to it tomorrow

[@shawngarey8769]

Jones Family did this work for you? I’m having the same issue with the same car. Is this something I can drive on for a while? Or do I need to fix it ASAP?

[@normaarellano3345]

Hi question I have the same problem, how long can you run it like this

[@7Rider77]

@@cazadordeadrenalina2161 brother where’s your garage I have same problem

[@cazadordeadrenalina2161]

Any autoparts.

[@otherother9021]

How did you get the arm off from the top? Mine is also loose from the top so when I pop it back in at the bottom it won't let it move. Esta cheuco.

[@luisquintero8260]

I. Trying to remove that part but even a 1/4 in t 30 wont fit it hits on the engin block I order a t30 6 inch extension ho it works how did u remove urs

[@FE428Power]

I used a JEGs screwdriver with the interchangeable tips to get the bottom one out. Made it simple

[@PSPLORDSHIP]

U figure it out?

[@pidera7486]

I barely managed to remove this without removing the intake, the intake mani on my car is buggered anyways, going to go pull one from the wreckyard anyways.

[@junelerma4384]

All these videos neglect mentioning how to disconnect the plug attached to the intake 😤

[@mikepruett1745]

easy