2011 Chevy Malibu low power, fuel injector, throttle body fix

[@jacobmeader5074]

Bro. Thank you. I was going through a nightmare. Had several codes first one was a misfire cylinder 1 and injector 1 circuit control. And a code for O2 sensor. Changed spark plugs coils and O2 sensor. It was the wire. Spent 21 bucks and replaced the wire and purring like a kitten. Thanks brother. A million times thanks for posting your experience.

[@adbeelisrael8501]

Your welcome bro.

[@shortyreesehme5525]

Where did you get the wire from ?

[@sleeplessvq5018]

What wire having same issue now

[@WiiildLady]

You are spot on. And they know damn well they have horrible wiring. I’ve been suspecting the past four or five years I’ve had my car. That it’s had wiring issues on and off sometimes all I have to do is go around and put electrical tape on the harness, and suddenly whatever problems were there disappear

[@mattb5858]

straight to the point, all the context needed, no stupid music. 10/10

[@lamontbyrd3364]

You just saved me so much money!! I was about to buy all new coil packs and injectors. But I checked the two wires you mentioned and now the car runs perfect again

[@adbeelisrael8501]

Lamont Byrd glad I could help bro.

[@adbeelisrael8501]

Glad I could help bro..

[@dayvonlewis1911]

@@adbeelisrael8501 does this go for every year cuz I'm having a problem with my 2012 Malibu

[@Vinceman-vo4gu]

Could you please tell me how to fix those two wires I don’t know how two :(

[@michaelalcozer1104]

Man I appreciate you doin this video I got the exact model and had this same issue. This helped so much

[@SamanthaSegrest]

Thank you Jesus, I have literally taken my car to the shop 5 times and they think im a dang fool! Im waiting on my car to cool down so i can do this! Please do more videos!

[@adbeelisrael8501]

Thank you now if for some reason you don't find it doesn't mean it's not there. Sometimes it's hard to find you may have to replace the whole harness.

[@SamanthaSegrest]

@@adbeelisrael8501 that's what I did. Took 2 days for delivery, as pull apart had none I trusted and about 2 minutes to install. Cost$24 off eBay!

[@_S_L_Y_]

@@SamanthaSegrest can you share the link for the ones you found on ebay? I'm trying to purchase as well for my malibu.

[@mahdue9620]

What wiring harness is it?

[@danielcurtis8746]

Man, I have been having the same exact issue, but I went through the steps of changing everything out and nothing was working, and yet I never thought to look at the wiring. Thanks and great video

[@adbeelisrael8501]

Your welcome

[@lindaborgetti1488]

Good information. I had a similar problem. Loss of power the Check engine lights, traction service and esc. Today aFter an hour a good mechanic troubleshooted and it was the battery cable on my car. I know with computers and high voltage it was electrical. I got a new battery 2018 and the battery post was a bit smaller. mechanic had to put a shim in so stop being lose and works great! Avoid dealers I took and when GM $750.00 to fix my car. I told him I’ll take to another mechanic. Gm wanted me to get tune up, throttle service, fuel injectors cleaned and more.

[@MrColeman631]

Did that fix your problems

[@josephnichols1037]

thanks for the info my son as the same model and we put new injectors in and it is doing the same thing it did be for so now am go to check the wiring

[@beneficialmusikgroup8690]

Saved me. Been redoing all my wiring from left door panel to front Fuse box. Makes sense. All of this wiring seems to be cheap thin copper, heats up passed nominal performance range and shorts fuses or worse burns. Smdh Chevy should be sued for the entire 7th generation Malibu line, its like they didnt even try.

[@WiiildLady]

Yup. Last year I had to rewire/replace my fuse block in the engine compartment. The shitty copper wiring was breaking apart when the car heated up led to a no start condition when the car wasn’t completely cooled down, started accelerating on its own while I was driving especially when I would hit the brake (ended up rear ending someone) & melted the part of the old fuse box where the broken wire was.

[@af-aftech6029]

I was getting the same issue with the #1 cylinder misfire too! I changed my plugs and all four ignition coils. the problem remained. Thanks I will try this out next. I'm so close to having it all paid off and want to keep it for as long as i can.

[@user-hr2yd5qi2w]

AF-AF Tech bro im having that same issue now in cylinder 4, was it the harness?

[@ynoel32]

I can believe that. I've been saying there's an electrical issue since day one. I just started having this issue. But since day one so many things.

[@Lonezewolf]

Is there a simple way to replace that wiring? Or do you need to know what your doing?

[@carlmartin3279]

Thanks bro...having the same issue...mine coming up with the throttle body sensor

[@mwallaace14]

Bro i could seriously kiss you lol. I've had p0301 code for over 6 months it's truly embarrassing how much shit I've changed an money i spent. You saved the day especially since money is so tight right now with everything going on "covid19" Thanks again buddy

[@adbeelisrael8501]

Thanks bro love that I can help.

[@kylie-chan]

considering im now on my third headlight connector being fried I think its pretty safe to say the wiring sucks. i wonder if this is my issue. my check engine light has never came on for this but I always have issues getting power up hills

[@brandirae7848]

My car is doing the same thing cylinder 3 misfire after driving for 30 minutes or so traction control comes on and reduced speed I have to let it sit for about a hour then it starts up after 2nd or 3rd attempt it has like a burnt oil gas mixture smell is that similar to the problem you had?

[@adbeelisrael8501]

Yea it’s the wire harness that got to the fuel injectors.

[@_WayneG]

Hey sir so basically is it a fuel injector wiring because my 2012 Chevy Malibu won’t start up or crank and check engine light stays on when I had sensors replaced and spark plug changed as well. So what do I need for the car also catalytic convertor changed , both lower and right arms as well then I left car sitting for 4 days and worn start up is it wiring ?

[@TheHarrisal21]

Man I just went through this for 2 weeks. Mystery misfire. Brand new coils and plugs. Cleaned MAF sensors. O2 sensors were already changed, compression test, even did a injector balance test which was good. While the car was running I accidentally moved the injector harness and the car sounded like it wanted to cut off. Set it another way no misfire. Number 2& 3 injector wires were broken. Now it puts like a cat and my gas mileage is back.

[@ericrivers6595]

You right bro all the wires seems to be dry rotted on these cars

[@stephanie8327]

Also , could this be causing low MPG ?

[@ChaddyMack]

So all I would do to connect those butt connectors would be insert the wire on each ends and then pinch it down? Do they need to be touching inside right? Or?

[@adbeelisrael8501]

No just make sure the wires are secure when you clamp the in the butt connectors

[@jayssimplelife4554]

I just did something similar to this I purchased a new wire harness easy to take off easy to put on also changes o rings to fuel injector cleaned throttle body and problem has been gone hopefully fingers crossed hope this helps

[@adbeelisrael8501]

It should do the trick ..this should be a class action law suite.

[@jayssimplelife4554]

My impala did the same

[@adbeelisrael8501]

It seems like any thing with gm or Chevy is having this problem...its a wonder the nobody has started a class action lawsuit.

[@hidalgor1387]

Thank you for sharing. This worked for me saved some money easy fix

[@adbeelisrael8501]

Your welcome. I just worked on a Chevy equinox had the same problems. I changed the fuel injection wire harness and it runs great

[@bigmasceo]

He Was Right ✅ Fix My Car Problem

[@adbeelisrael8501]

Your welcome

[@Arzavalad]

Did you have any problems with losing all power and it reconnecting on it own? Like for example I try to start it and it sounds like it’s shorting out and I lose all lights everything. Then 30 sec later everything turns on but still have the same issue

[@adbeelisrael8501]

Yes that’s what made me diagnose it.

[@stephanie8327]

Do you have a video of you changing the wires? Can you link it ? If not it sounds like so many of us can use it ! Thank you !

[@kbro96]

Been going thru this issue myself every time I fix one wiring issue another one pops up…. GM should have to pay compensation to anyone that’s owned or owns one of these with their trash wiring…. Between out of pocket expenses and mentally stressing you out it’s enough to make you wanna lose your mind and just the the damn thing on fire

[@auto116pits]

I know the video is old but were you getting service esc and service traction and lights on?

[@adbeelisrael8501]

Yes I did get those. It may be different for some for this is an electrical problem... Also get you Cadillac Converter checked...

[@samuelbernard4755]

Can u tell why when I fill my tank on a 2011 malibu trys too shot down

[@adbeelisrael8501]

That is a hard one but it could be a bad fuel filter or fuel pump

[@dhannah4399]

My 2009 Chevrolet Malibu 2.4 had the same problem. I replaced the wiring an injector.

[@MAMAR-ov8in]

Did it wofk

[@dhannah4399]

@@MAMAR-ov8in yes sir. Thanks

[@kemaniknight6556]

So I have a 2011 Chevy Malibu and when I’m at a stop and I start accelerating again it jerks and tells me traction control, I don’t know what the issue is but it really do suck and I need help knowing what it is, because I took it to get tested and nothing came up on the diagnosis test so I’m very confused of what it may be, any hints?

[@adbeelisrael8501]

You have to watch the video it’s the wires. They are very thin and they short out and break. It’s not your throttle body it’s not your coil it’s not your traction control

[@stephanie8327]

Same for me! Goes into Limp mode when I come to a stop - gives me anxiety driving . No codes though. Gonna have to check this out

[@hectormontemayor2238]

Hey bro I got a Malibu 08 and it keep blowing the fuse inj/coil. Ing/mod I'm tired of being working on it. Any idea what can be causing this problem

[@adbeelisrael8501]

I never blew a fuse but watch the video it could also be from the wires shorting out

[@wspears617]

Where did you buy your wires from? I just purchased a 08 Malibu 2.4L for my daughter but the gas is poor. I'm looking at replacing it ASAP 😊

[@adbeelisrael8501]

I did buy any wires but you can buy them at www.partsgeek.com

[@bambam5103]

I got the same car had the same problem wires are all trash but after the throttle body I actually changed the gas pedal and it fixed it but I still believe the wires are trash

[@adbeelisrael8501]

Trust me it’s in the wires

[@Vinceman-vo4gu]

Can you please do a video on how to replace the wires i don’t know how to do it and my car just broke down at a cvs :((

[@adbeelisrael8501]

Well I no longer have the car but the wire harness isn’t that hard to change.

[@MrColeman631]

I have a 2010 Malibu 3.6 #2 cylinder keeps miss firing new coils and plugs guess I’ll be checking wiring harness thanks buddy

[@kmullinix928]

Curious if it was the wiring. Mine says cylinder #2 also

[@adbeelisrael8501]

Your welcome

[@JAYNYCTV]

My 2013 chevy malibu says power engine reduce I cant go past like 20mph to 25mph I have taken it to different mechanics an they tell me different things have a headache 🤕

[@adbeelisrael8501]

Watch my video the problem is the wire harness that goes to the fuel injection system

[@daveyboy8907]

The wire loom rots on these then the heat ruins the wires.I have seen this on my 2011.

[@adbeelisrael8501]

Yes the wires are real thin and cheap

[@courtneywilliams7230]

I’ve got a 2010 LTZ with the 3.6L. I’m having a misfire on cylinder 5. Changed plugs and coils now and still there. Would your solution still apply ??

[@adbeelisrael8501]

Check the wiring to the fuel injectors. They are so thin that they break.

[@adbeelisrael8501]

Yes...they fitted these cars with thin wiring that doesn't hold up in heat.

[@deshaunekidd7901]

Will this work for 2013 model?

[@adbeelisrael8501]

Possibly if you having the Same problems

[@GoofTRICK]

We’re is it located bro I’m having that problem

[@adbeelisrael8501]

In the wire harness look for broken wires. Refer back to the video

[@omarcuevas7404]

When I put the small computer on I got some po's like the knocking sensor and ignition switch 1 and 2 .. I cleaned my throttle body and nothing I bought new throttle body and I tried to relearned it and nothing

[@adbeelisrael8501]

Sorry so late. Trust me it's the wire harness to the injectors.

[@adbeelisrael8501]

Change the wire harness...it has bad wiring. Trust me

[@latinoracer]

Man, I changed the coil, fuel injector harness and spark plug. Still no resolve. I bought new injectors so I'll go after that. I've tried changing the throttle body but can not get the thing to recalibrate for the life of me.

[@adbeelisrael8501]

Follow my instructions on the video it works

[@1111comment]

Which wires did you change?

[@adbeelisrael8501]

The wires going to the injectors the were broken.

[@adbeelisrael8501]

The worst in the injectors were separated/broken.

[@carterbolden168]

Did your car smoke when they was bad ?

[@adbeelisrael8501]

A little

[@raulvaldez8585]

What are the symptoms to this problem?

[@adbeelisrael8501]

Loss of power, jerking, esc light check engine light,

[@fidelcastillo86]

Did you hade the service esc massage as well?

[@IBRAHIM-zn4fp]

Fidel Castillo I did 😓

[@adbeelisrael8501]

Fidel Castillo no once I fixed that wire and a tune up it all stopped and it’s still running good till this day

[@adbeelisrael8501]

Fidel Castillo yes all of that went away

[@170matt9]

What's the name of the harness i need to replace

[@adbeelisrael8501]

Fuel injector wire harness

[@michaelsanders9506]

Open circuit usually bad wiring connection or fuse relay

[@bigxrecords7375]

The Low power reduced is the throttle body or the throttle body fuse going bad or fuse box itself I’ve seen this time and time again with these cars but it’s an easy fix

[@adbeelisrael8501]

Not in this case. It's the cheap wire harness

[@bigxrecords7375]

@@adbeelisrael8501 yup or that cheap ass car, failed on me sooo many times

[@niilantedavis5037]

What wire do you cut ? This is my exact issue is they want $300 to fix it

[@adbeelisrael8501]

NiiLante Davis go to the injectors their are two wires one red and I think white but don’t quote me but each wire from the base feel the wire with you fingers and following the wire feel to see if the is a soft spot or a separation

[@adbeelisrael8501]

You have to see fell if the wire is broken inside of the plastic sheld. But your probably better off just changing the harness

[@sweedlanagabriel8447]

Thank you

[@joeliglesias31]

Did you have to relearn the throttle body?

[@adbeelisrael8501]

Joel Iglesias No didn’t have to.

[@adbeelisrael8501]

No didn’t have to

[@adbeelisrael8501]

Joel Iglesias no

[@omarcuevas7404]

Bro I have the same problem for about a month I been trying to fix it my self and I just got frustrated I took it in to a chevy dealership mechanic shop and the car has been there for 3 weeks they still cant find the problem..

[@adbeelisrael8501]

Bro sorry so late. It's you wire harness to the injectors. I just did a Chevy equinox with the same problem. I changed the wire harness runs great. Trust me.

[@adbeelisrael8501]

Its in the wire harnesses bro.

[@davidmlner85]

@@adbeelisrael8501 Hey I'm having the same issues. At the stop light my car shakes and act like it wants to shut off. I have no CEL's. I've wiggle the injector wires and car doesn't change or act like the wire is faulty. Please hell I've spent so much money trying to fix this issue. I had a crack exhaust manifold and bad cat converter all been repaired. Do you know of any other issues that may cause this. O2 sensors replaced, MAF sensor, cam sensor, vvt solenoid, spark plugs nothing stopping the bad idle and cut off.

[@adbeelisrael8501]

@@davidmlner85 it the wires. Your going to have to diagnose the wire harness ..if all fails replace the wire harness to the full injection. The wires are REALLY thin and some were in there a wire has broke connection. Go back and look at my video. Check closer to the injectors.

[@davidmlner85]

@@adbeelisrael8501 mechanic checked the wires we can’t figure it out

[@funyun000]

So was this causing your Malibu to crank but not start?

[@adbeelisrael8501]

funyun000 that could be a number of things from the fuel pump to a fuse can you be more specific

[@adbeelisrael8501]

Not really I would start it and it would run really bad with no power to move. It would move real slow.

[@jayssimplelife4554]

Thank You Sir ✌🏽

[@adbeelisrael8501]

Your more than welcome sir.

[@hotfry]

Is v4?

[@adbeelisrael8501]

It may be different on your car. Have a mechanic look at my video then he can know what to look for.

[@hotfry]

@@adbeelisrael8501 my engine looks similar but how do you change fuel injector? We keep getting same code. Change the spark plugs already

[@adbeelisrael8501]

Not the fuel injector. The wiring that go to the fuel injector.the wiring is so thin that after a wile the heat from engine are a power serge causes the wire to break. You want see it because its covered with plastic. You will have to get somebody to do a check engine light and it will tell you there is a misfire. Depending on which number injector that's the on you check the wire for a brake by feeling the wire for a soft spot. Go back to my video to see what I did.

[@daniellira4156]

The problem there is the wiring harness...if you tug on wires for #1 cylinder, engine starts misfiring.

[@adbeelisrael8501]

Yes that's something what I did yes. The problem is in the wires.

[@MAMAR-ov8in]

I drive my for like 10 min the i ger service esc injector 1 circuit

[@adbeelisrael8501]

You have to find we’re the wire have separated or by a new harness

[@cjbenson98]

Very helpful thank you

[@theycallmebrent1]

same issue, same car, same idea (process of elimination, least expensive to most haha)

[@adbeelisrael8501]

Brent S yea 😂😂😂but it’s in the wiring

[@timothycody2873]

Have same car and year nothing but electrical issues

[@adbeelisrael8501]

Its the wire that they used on these cars..very cheaply made.

[@dustinhelsley1604]

My car is doing the same. They said it was a broken wire to the injector after the injector was replaced 5 months ago. Will never buy or recommend a chevy again.

[@adbeelisrael8501]

Dustinkb8h3t6g3333333333333 Helsley yes it was very cheap wiring, the heat played a big part on that cheap wire.

[@adbeelisrael8501]

Dustinkb8h3t6g3333333333333 Helsley it’s the wire

[@tamps2147]

Did you have to buy a new injector or fix the wire?

[@xivmercenary]

Solder is a better repair.

[@adbeelisrael8501]

Yea but my main reason was to get the info out.