Nice job. I wish everyone took that much pride in their work.
@AlfredosAutoGlassRepairCorona6 жыл бұрын
Kurt Umlauf thank you. I wish the same thing I wish everyone take their job seriously especially being the windshield being a safety device in your vehicle.
@unnikrishnan73573 жыл бұрын
You want any assistant🤗
@GlassMaster819 жыл бұрын
Good job bro.. I own an auto glass company in new jersey. Nice to see people doing proper installations with current industry tecniques
@robertblower35674 жыл бұрын
Worker inthe industry for 20yrs nice job from the uk
@AlfredosAutoGlassRepairCorona4 жыл бұрын
Robert Blower Thank you!
@dmdively2 жыл бұрын
Can you replace the top windsheild molding(between the windsheild and roof) without removing windsheild?
@jsanchez62706 жыл бұрын
Alfredo, What setting tool do you recommend on this particular windshield? The rolladeck or the SIDE kick? I don't know which one to purchase because both give me doubts and concerns. I service Nissan, Chevrolet, and Toyota body shops here in México, and I want to give a better impression and better and more efficient worksmanship. Thanks for tour feedback, and I enjoy watching your videos.
@AlfredosAutoGlassRepairCorona6 жыл бұрын
J Sanchez For the type of vehicles you are working on I would recommend you the Rolladeck, very useful tool to set the glass by yourself especially in those type of vehicles that you are working on.
@jsanchez62706 жыл бұрын
Alfredo's Auto Glass Repair Corona thank you very much for your opinion. Let me tell you that even the more prestigious glass companies down here work as if we were still in the stone age lol. I have been in the glass business since 2000 when I used to live in Texas, and I got to bring all my Equalizer tools, especially the Equalizer express, and let me tell you that I'm pretty much the only technician with one in my área. Sadly recently all my tools were stolen but I'm working on replacing them. Wella, to make it short, let me congratulate you on your videos, you área pretty much the closest to a perfect textbook technician, I'll be on the look out for your videos. Saludos desde acá del norte de México. Exito
@AlfredosAutoGlassRepairCorona6 жыл бұрын
J Sanchez thank you for your positive comment! I’m sorry to hear about your tools, that’s really sad I pray that God will give you everything back and more. Keep up the good work.
@Abhilashsinghvi4 жыл бұрын
Did you end up using back the same long moulding that goes all the way back? You did show that some of the clips were broken.
@AlfredosAutoGlassRepairCorona4 жыл бұрын
Abhilash singhvi yes we reused the molding and install new clips.
@JC-pz5rk5 жыл бұрын
Thanks for the videos. I always watch your videos for tips. Do you know the part number or where i can buy replacement clips for future jobs. I have done 2 of these and both time they are always glued in. I need both. The one on the pilar and the one on the molding
@fanstyfootballsavage77877 жыл бұрын
Nice job looks like factory. The first time I installed one of these it took me an hour and a half
@mikepolley53258 жыл бұрын
this video is exactly why you shouldnt replace your own windshield
@jameschapman1329 жыл бұрын
Nice job sir . Can I ask why Dow why not sika or another glue what benefit do you see with choosing Dow. Your Milwaukee muilti tool did it fit the feine knife blade or did you have to modify ?
@UhOhMaC9 жыл бұрын
James Chapman DOW is recommended by most glass manufacturers. However Sika is fine too. The blade I'm guessing was a long blade properly sharpened. Manufactured by Equalizer. A very fine tool to have.
@AlfredosAutoGlassRepairCorona9 жыл бұрын
I really like DOW for many reasons. One major one is the urethane then Betabrade F1 witch is what I use to remove the contamination off the glass it works better then anything else I tried, also the great customer service they provide.
@BadWeatherfreak5 жыл бұрын
Where was the leak coming from? Mine leaks in the drivers side air bag.
@AlfredosAutoGlassRepairCorona5 жыл бұрын
Bad Weatherfreak across the top.
@mabast0074 жыл бұрын
Where do you get the F1 product from?
@robertcastillo698 жыл бұрын
Where are you located, and what areas do you service?
@rayg54459 жыл бұрын
Where did you get the new molding for the top of the glass? i have to replace mine its worn away
@AlfredosAutoGlassRepairCorona9 жыл бұрын
You could by the molding from Honda or your local auto glass shop.
@rezarazo9 жыл бұрын
Good job. Try cleaning the apature after the cut back not before it
@AlfredosAutoGlassRepairCorona9 жыл бұрын
I actually clean before and after.
@WindshieldFitters8 жыл бұрын
Alfredo what cut out tool did you use to take out the glass without breaking it?
@TrevorPemberton1767 жыл бұрын
You can see the cold knife on his bag and he mentioned sharpening the blades
@safeautoglass6114 жыл бұрын
we also have a laugh when we get those mission jobs. Go to mission they said, its cheap they said. hahahahh sometimes i can push the top of the glass out. But its only $120 and your $250 hahahah have fun. I love your videos BTW. Keep up the good job.
@AlfredosAutoGlassRepairCorona4 жыл бұрын
Safe Auto Glass In our industry you get what you pay for, thank you for watching my videos!
@johnnawrocki40798 жыл бұрын
we call them mother tuckers here in MI unsafe practice!
@jimmyjhonson45905 жыл бұрын
You didn't show how you took the glass out!!!
@AlfredosAutoGlassRepairCorona5 жыл бұрын
Jimmy Johnson my title does not say how to. This is for my customers
@jimmyjhonson45904 жыл бұрын
I hate when I see this kind of installation with those estupid guys , and they charge very cheap, but customer likes that because they always go for the price, but they don't realised that work they going to get its worthless, good job Alfredo
@DKStudiosful8 жыл бұрын
the gold and precision moldings suck at the top. after market flex always looks much better. looks like thats what you used
@AlfredosAutoGlassRepairCorona8 жыл бұрын
I sure did use the 1650 flexitrim, it fits better then the molding that comes on the glass.
@DKStudiosful8 жыл бұрын
ya. the moldings on the glass dont sit tight to the roof
@MrWikilop8 жыл бұрын
ɷɷɷ Heeeey Friendsssss I Have Found Workingggg Online Hacck visittttt : - t.co/vOFsUFqOI7
@Lettemhearpodcast7 жыл бұрын
I have not been doing auto glass for a very long time, but I can tell that the job previously done is terrible workmanship.
@bcherbs4 жыл бұрын
Ford Flex has one of the worst a-pillar moldings known to man, brittle as egg shells