2011 Hyundai Tucson Lower ball joint replacement

[@anglosaxon1622]

Good clear detailed video. On my 2013 Santa Fe ( almost exactly same) biggest issue was the pinch bolt well rusted in. Took heat, fluid and hammering to eventually( perseverance) remove it. That pneumatic hammer is great for such problems.

[@montydaniels1054]

Thanks for uploading the video Michael. I just bought air ratchets then my 2 year old compressor stopped working, lol thx Harbor Freight.....

[@ManicMechanic007]

It has been a long time. Welcome back Michael!

[@7286412]

Thanks! More videos to come.

[@anisatrevino4937]

I started working on my own vehicle and I know this might be a stupid question but could you possibly name the tools that I would need for my ball joints

[@blaynemacpherson8519]

Nice video. I gotta get my wife’s done both sides. How long did it take you to do this? Thank you for the video.

[@miguelvelez1696]

What is the name of the Drill to remove screws

[@Mr71chevyvan]

i have 2wd version any thoughts on the fix for a harsh ride ? dealer and others have told me this is normal for this model

[@DEYOCLUB]

Thanks! Super helpful!

[@brentonledoux4444]

Would this apply to a 2013 Hyundia Tucson as well ?

[@montydaniels1054]

I would imagine since the parts were the same for 2005-2010 Tucson. At least the parts I need said they were the same. Front end should be the same unless it's 4wd, then sometimes they'll need to be different.

[@LincolnLeFlore]

Will I need an alignment afterwards?

[@7286412]

I don't think you will need one.

[@shaneairsoftdude]

Nothing in the steering assembly (Tie Rods, etc.) were impacted, so no!

[@molaroismorais1955]

Thanks brother

[@Mr71chevyvan]

michael. i own a 2011 tucson with a terribly stiff suspension. dealer (and others) say this is a norm for this model. i have improved ride quality a bit with a wheel swap. i replaced my 17" tire and rims from a santa fe that had 16"s and new tires with thick rubber any thoughts on further improvements i can do ?