2011 Toyota Rav4 2.4L alternator Replacement 4 cylinder

[@isaacbilodeau2879]

Looks like it's time to do this job on my 2011 RAV, she just started making the infamous whine today.

[@kalianderson5319]

I appreciate your video. I ain’t a wrench guy. Was able to fix my wife’s daily from your video. Thank you

[@robertmccarrick8410]

thank you....very helpful...you explain everything...clearly😀

[@gdlivo3353]

Tips for 2AZ-FE engine variant. Remove coolant reservoir. 2AZ-FE engine is different with a 19mm tensioner and further back underneath and the bottom alternator bolt is 12mm. Belt is difficult and took many attempts to get back on. Long screwdriver helps to guide it onto the smooth (non ribbed) pulley below alternator. Some people remove the engine mount for better access.

[@cylisbarre7202]

Thank you for making this video.

[@ifonlyone6011]

Great video! Getting ready to make this repair. I'll let you know how it goes

[@BloominOnion1]

how'd it go

[@ifonlyone6011]

@@BloominOnion1 easy peasy, one of the easiest repairs Ive done. Getting the belt off and on was the hardest part.

[@BloominOnion1]

I just did it myself, yesterday. Wasn't bad. For me the hardest part was getting that lower bolt to take, putting the alternator back in. Otherwise, A-Ok!@@ifonlyone6011

[@johnb1658]

Great video thanks! One lesson to learn is never put an AutoZone alternator on a Toyota or Honda. They always cause problems. Only use a Denso unit.

[@pnv8477]

Great job, thank you!

[@mikebugby1550]

Thank you!!

[@bethlogsdon2503]

Is that voltage mentioned in the beginning while the car is running or while it's off and "cold".

[@sandradavis8322]

I just had my alternator replaced yesterday, but it’s making a really loud whining noise. I thought that it would get better as the alternator charged and the battery charged, but it’s not something wrong with the alternator.

[@VinceMarcelo-v9j]

Is the idle relearning necessary?

[@lawrencelewis1127]

I only had trouble with putting on the belt and taking off the belt. If you are having trouble putting the belt back on make sure that the belt is only touches the things in the diagram. I had it caught on something extra and it was impossible to put on.

[@DeeeeezN]

I have the same car and same year. I don’t think my belt tensioner has that bolt like that car.

[@Tiamonj-djay]

Good video. Please add tools used

[@BloominOnion1]

he says every bolt size, as he walks through the install, lazy bones

[@VinceMarcelo-v9j]

Is the idle relearning necessary?

[@nandyesc]

No need for idle relearn just drive car normally