2012-2016 Chevy Impala 3.6 LFX AF Dynamic Cold Air Intake Unboxing, Install, & Review

[@Guido19]

Make sure to like and subscribe for more impala videos!!!

[@hunterwinters587]

Did u get a check engine light? I did with mine but she runs like a champ! I just wanna try to get it fixed so I can use my remote start again:(

[@Guido19]

@@hunterwinters587 no I haven’t! This video is older and I’ve had it on for about 7 months now and there is no light and no issues at all. Sounds great, great power, and great throttle response. I didn’t know that you couldn’t use the remote start if it had a check engine light tho? Something else might be going on electronically. I would also check and make sure all the hose clamps are tight because there might be a vacuum leak somewhere possibly

[@hunterwinters587]

@@Guido19 I appreciate you responding I really wanna get it fixed I replaced the mass air flow sensor when putting the air intake in. I'll check all my hose clamps when I go out there. It's Weird if I clear the engine code it goes away till I start the car up again the code comes back upon startup.

[@Guido19]

@@hunterwinters587 hmm that’s so weird. I have not heard of that problem or that code. You might have to put the stock on back on and just see if it will go away. Or see if you unplug the battery for a hour and plug it back in see if it’s still on. Unplugging the battery should reset the mass air flow sensor and the throttle body.

[@Guido19]

@@hunterwinters587 no problem bro!!!

[@tiahodo11]

Appreciate the impala videos. I want to fix and mod my 2008 Impala but there isn’t a lot of videos on them so thank you! Keep them coming please.

[@Guido19]

Thank you! I appreciate the feedback! Yes there is a lot more videos to come! If you check out my channel I already have quite a bit of them posted!

[@TAqqWmuBJ2NP6bS]

Great video and super helpful! Definitely considering installing this in mine!

[@Guido19]

Thank you for the feedback! Appreciated!😁

[@chevymaynard472]

Awesome I just ordered one tonight can’t wait 😊

[@giuliogenduso9521]

Very nice & clean install!!

[@WestsideeGloo]

just watched your bumper video now i’m boutta do all the things you did to mine W content

[@Guido19]

Thank you appreciated!!!🤝🏻

[@Jordan-rb5uz]

Love your content my man learning new stuff lol i got a 2012 impala Lt!!💯

[@Guido19]

Awesome man much appreciated!!

[@JpattDaHebrew]

Great job, thanks for the video install!

[@Guido19]

Thank you much appreciated feedback!

[@4mikeyd]

U wonder if this is why my Impala idles at around 5rpm when stopped at red lights? When it's just running in my driveway. When started cold. Idles around 1000rpm then goes down to around 6000-8000rpm's. Great video brother.

[@4mikeyd]

Awesome video! Thank you! I wonder if that would fit my 06 Chevy Impala LTZ V6? The OEM assembly on your Impala looks exactly like mine. But mine is being held together by a thick strap. Because the top rubber clips are gone and the clip housing is broken off. Can I ask. Does this increase power to your engine? Again great video. Even though you showed everything step.by step. I know with my luck. I couldn't do what you just did. How does your car feel like Now. Just Subscribed to your channel.

[@Guido19]

hmmm that would be a gamble. you could probably get it to fit up or go with a universal set up and that would work but it might be kinda off or out of line I'm not sure. Also yes it does, horse power on cold air intakes is anywhere from 5-10 hp depending how restrictive they are. You also get alot of sound from them too. The throttle response is way better too!

[@ElricX]

I kind of want to do this to my 2012 Lacrosse with the same engine. Make it a Hotrod Grampa car!

[@darriusspraggins4919]

Same car my RPM keep jump up and down after I installed it? Answers?

[@ZeroTimeTraining]

I have a 2013 Impala LT I’m looking to make mods on. What exactly does this do? In the simplest terms.

[@MrKJ1991]

Man I wish they had made one for the 3.6 !😢

[@Guido19]

This is actually the 3.6l!

[@MrKJ1991]

@Guido right i meant for the 3.5 i got 2011 LT

[@ricardocastellanos434]

Was wondering how can I make faster currently waiting on k&n air intake but what else can I do to make it pick up a bit more

[@noahdymond5635]

Think any of the 3.9 or 3.6 intakes would work on a 3.5? If no what makes it incompatible?

[@Guido19]

I don’t think it would. The intakes of those are shorter and at more of a straight angle. On the 3.6l I believe they are longer and at more of a angle and that maters because the position where it mounts on the radiator wouldn’t line up same with the mounts on the computer under the intake. You could make one work but would need to be a universal type of thing that is shorter.

[@sophiaandjohnsworld2903]

Cold air inductions made for the 3.9 n 5.3 fits the 3.5 perfectly

[@CaliBrett909]

What did you use to clean your engine? That bad boy is nice.

[@Guido19]

Thank you! Just water and detail garage black dressing

[@nathan_ar8665]

Will this work on a 2016 Chevy Impala ltz limited 9th gen?

[@Guido19]

Yes!

[@4mikeyd]

Some mechanic said on a video. That doing the mod. That the check engine light may come on? And he said that the car won't pass inspection? I don't know if that's true or not?

[@Guido19]

With this air intake no, but if you go over kill and possibly change out your mass air flow sensor and you get a intake that has a bigger air space on the inside you could possibly get a check engine light.

[@czhuntscoins]

Not to be a critic but I think u installed the heat shield on the wrong side, I havnt finished the vid yet but i might be wrong but imo if the heat shield is on the I safe how’s it gonna block heat

[@Guido19]

No with this particular cai the heat insulation goes on the inside but other ones go on the outside.

[@NatalieN_Vloges]

Looked at the link so I could get one for my 2010 impala but it says it doesn’t exist

[@Guido19]

@@NatalieN_Vloges I think they discontinued them unfortunately

[@keelandarger4866]

Hey I gotta ask, this is unavailable currently so I’m gonna buy the k&n intake instead, will it be the same installation process?

[@Guido19]

Yes it will!👍🏼

[@keelandarger4866]

@@Guido19 oh thank the lord! Thanks dude!

[@Guido19]

@@keelandarger4866 haha no problem

[@0mgFPS]

do you have any recommendations for a cold air intake for the 2012 ls?

[@Guido19]

I would do this one or the kandn

[@chandlerloe1276]

will it fit 2012 impala ltz 3.6 v6, and if so where can i order this from?

[@Guido19]

Yes. Im not sure as I think the company stopped making them for the impala

[@ladanianross9014]

Can these kind if cars get supercharged Turbo kits?🏁🏁

[@Guido19]

I don’t see why not! This motor is the same as the one in the Camaro and the Camaro has a super charger and turbo kit you can get for it! This motor is the same but there is some differences between this one and the Camaros but I’m sure you could get it to work! The motor could handle it the limitations I would say would be the transmission giving out cause of the added power and also the space in the engine bay for something like that cause there isn’t much room!

[@AshtonD-ps8sr]

would this also fit on my 2006 3.5L V6 chevy impala

[@Guido19]

It wont unfortunately unless you can try to modify it

[@AshtonD-ps8sr]

@@Guido19 Do you know how i would go about doing that? Also do you know of any good intakes that would fit on a 2006 3.5L impala?

[@Furtsan4]

Will mine fit I have a 2015 impala limited ltz

[@Guido19]

It depends if it’s a 2015 9th gen it will but not the 10th gen new body style

[@trevorpouliot9929]

Any idea if this works on a 2011 with the 3.5? This is the closest I can find for it

[@Guido19]

The process of installing the cold air intake should be the same but you would need the 3.5 cold air intake as this won’t work.

[@trevorpouliot9929]

@@Guido19 unfortunately I don't think any company makes one. Been looking for 2 years

[@Guido19]

@@trevorpouliot9929 yeah unfortunately I think you would have to make one

[@joebad6595]

You ever do one of those plug and play tuners?

[@Guido19]

Not yet! I’m looking to install a stage one trifecta tune

[@4mikeyd]

Dam. That product on your link is unavailable.

[@Guido19]

Bummer. That’s the only link that I know of so they might not be selling them anymore

[@DragonMasterAngel]

Itll fit any 3.6 impala right? I have a 2015 impala limited.

[@Guido19]

No it won’t! It’s a different design and on a different side. If you still have the 9th generation style which they made in 2015 too it will work. If you have the 10th gen it won’t fit

[@DragonMasterAngel]

@@Guido19 yup the limited is a 9th gen model

[@Guido19]

@@DragonMasterAngel it will fit!

[@Nick-hc8ni]

Does it turn on your check engine light?

[@Guido19]

Nope!!

[@CertifiedShadetree]

How are you liking it so far?

[@Guido19]

It’s awesome! This video is pretty old cause I installed it about 6 months ago. It’s built really well and sounds great! I have a muffler delete on my car aswell and it sounds killer!

[@calebmedina4689]

@@Guido19 if you delete the resonator as well it sounds even better i took off both on my ‘13 impala

[@Guido19]

@@calebmedina4689 yeah I just have the muffler delete. I’ve heard the resonator delete too and in my opinion it doesn’t sound that great and it’s to loud and Tim can sounding and drones bad cause there’s no resonator

[@trevorpouliot9929]

Where do you buy this from? Their website is like ebay and seems totally unreliable

[@Guido19]

I actually bought it from Amazon

[@trevorpouliot9929]

@@Guido19 must not have made em for my 2011. Can find em from 08 and earlier and 2012 and later

[@AJPiner]

What’s the website you bought that one from

[@4mikeyd]

Amazon but it's unavailable. Costs around $180.00

[@treyusry5583]

Well it fit a 2013 impala Ltz?

[@Guido19]

Yep!!!

[@treyusry5583]

I don’t have a California emission

[@Guido19]

@@treyusry5583 they make a cap that comes with the kit you install if you don’t have the tube.

[@arshawnmoore328]

Does it wrk for 08 impalas to

[@arshawnmoore328]

08 3.9

[@Guido19]

No they are same body style but diffrent motor. They make 3.9 intakes tho

[@arshawnmoore328]

@@Guido19can u help me find a set for it. I been looking I need help

[@Guido19]

@@arshawnmoore328 the only thing I could find is like universal options

[@coolmusicsounds2387]

Unfortunately still illegal in California.

[@Guido19]

Man that’s unfortunate

[@dg31062009]

All of that is going into the atmosphere

[@Guido19]

Ummm what?

[@slammingbrutaldegeneracy2561]

All of that air ☠️

[@Guido19]

@@slammingbrutaldegeneracy2561 I don’t understand lmao

[@DELUXEAVO]

Will this fit a 2010 Chevy impala lt

[@Guido19]

No it won’t you will need the different motor option