2012 Fiat 500 Twin Air Plus 0.9L Petrol Clutch Replacement.

Support the channel:
www.paypal.com...

[@WMCS]

This is a follow from on video from last week. Showcasing subframe Removal. Note : are upload from archive

[@bigdog502]

Do you repair semi automatic clutch? Got a 2014 3008 and my local garages won’t touch it

he is great at wot he does he makes it look so easy.

[@MotorwiseBromley]

yesterday i did this very same job in a dry workshop with a two post lift ....... fair play doing it on your back in the rain and cold 👍

[@matthewkeenan1964]

Just watch this video, even though i dont own the same car. Great content and great work from you. To do these types of jobs on the floor in british weather takes alot im sure. You have helped me change a clutch on my mk3 mondeo st diesel, just by watching your video years back...👍

[@WMCS]

Thanks for for pipping by ☕️🍻

[@JoseGamboa1]

It is incredible what a single man can do without help when he uses his head well. CHAPEAU. Greetings from Uruguay Kevin!!!!!

[@WMCS]

Greetings. 👋

[@lasseystad3266]

Thank you Kevin for this video. Love your comments during the clutch change. But cant help getting more worried about your recovery. An update on whats happening with you and your situation would ease this old farts mind a lot. Regards from Sweden.

[@maxthecaddy8451]

Absolute love this channel, keep them coming Kev 👍

[@WMCS]

Thank you Mike… I’ve filmed so much videos .. enough to post for another 10 years 😁🤩😂🍻

[@eddieMurphy11111]

I supose you were only practising last week but its a good exercise ,thanks for the video

[@kevinisawake]

We HIT the road indeed - great work my man.

[@WMCS]

That’s it 😁🍻🍻🍻

[@scotspie501douglas7]

kevin every video yo umake i,m knackered watching you great work mate so proud of how easy you do the work

[@WMCS]

Thankyou .. very much appreciated. Hope you cracked a mid strength beer after all that watching 😁🍻🍻

[@scotspie501douglas7]

@@WMCS Kevin we have a vw polo2002 and a vauxhall grandland in our family so only Stella its the spot watching your video no other you tuber grafts like you mate

[@01ghent]

Good job supermen 👍

[@KawasakiVersys-bt8cc]

In France ,this job IS paid (without taxes and soon), 250 euros. You re courageous and efficient.👍🇫🇷👏👏👏

[@WMCS]

Only ..!! That’s cheap labour in my opinion.

[@KawasakiVersys-bt8cc]

@@WMCS Yes, without the clutch. Just la main d'œuvre, the work only (without taxes incomes etc...). Good continuation 👍💪

[@vwwrenchie314]

All kinds of stuff to remove just to get to the darn clutch!! The clutch ninja handles it no problem... way to go Kevin!😎👍🚘🇨🇦 🍺

[@WMCS]

Thankyou 😁🍻

[@clivereynolds6633]

Very interesting. takes me back to when I was at school. My dad had a driving school and when one of the clutches went, my brother and I would fit a new one over night. really hard when you are fifteen and my brother was three years older. Wolesley 1500"s and really heavy. all in the open driveway. Those were the days (NOT)

[@WMCS]

Thanks for the feedback. Means a lot from someone that’s walk the walk. Especially old skool. 🍻🍻

[@ashercohen4739]

Albert you are a champion👍👍

[@dustinswatsons9150]

Every movement is fluid and efficient

[@WMCS]

That’s it. Move only when necessary.

[@izmiregal1]

​@@WMCSyou talk about sex?😂

[@jameskeys971]

My thoughts exactly

[@izmiregal1]

@@WMCS did your wife think the same?🤣

[@TriforceOfCourage97]

i am always amazed when you just lift those gearboxes back into place. I have taken the damn thing out of my Peugeot 107 4 times now and always a hassle to get back in. I always need 2 people. the last time I just took the entire engine out and did what I needed to do while it was on the engine hoist lol

[@WMCS]

That’s another way I suppose. .. 🍻🍻🍻🍻

[@TriforceOfCourage97]

@@WMCS haha, yea. didnt take much longer since almost everything else was out of the way 🤣🤣

[@aservclive]

Job well done matey.

[@xxl531]

Did the exact same one today 😊

[@WMCS]

How did you tackle it. Technique wise. ..?

[@xxl531]

@@WMCS i had a ramp so a bit easyer the driveshaft was not coming out the hub so had to remove the whole hub , and left the subframe in and did the in between techgnique

[@train4905]

Godbless bud,hope your feeling a bit beter😊

[@RanjitSingh-h8b]

Good work 👍

[@jorgemongesilva]

Fantastik kevin crack 💪💪👍👍

[@milanmilosavljevic6920]

Nice job my men, 💪💪💪

[@barthsoprano]

Great work!

[@Mr53jerry]

Bravoo...👌👍🍀🍀🍀

[@kokyserb]

Oh my God....raining day with snow...take care of youself!

[@topbanana39]

Bloody marvelous job mate what a stupid place to put an exhaust bracket as for the sub frame wouldn't fancy my chances in any accident 😅

[@WMCS]

I think that subframe is there as smoke and mirror

[@arnoldkipngeno3108]

Do you usually have to clear codes after the clutch change? Great content man, always appreciated 👍

[@WMCS]

Do you mean because the module has been disconnected..? If so no. Because the battery was removed first.

[@valeradriangafencu9731]

SUPER

[@John-xp8fc]

A trainee mechanics nightmare putting it back together correctly.

[@WMCS]

Pattern work always makes it easier 🍻🍻🍻

[@jamsstar2010]

Was my dream as an apprentice, loved it 😂

[@ArtiomasvZ]

nice job

[@malikfaal9742]

Get some eye protection for Christ sake good work 👍🏾

[@VasileBotiz-w7g]

Top men

[@WMCS]

🍻🍻

[@VasileBotiz-w7g]

@@WMCS thanks 4 your video mate 🍻🍻

[@bixby9797]

Just did this on a 2015. Part I missed was the subframe. Still got it out and in but would have been much easier. I do have one brass, round bracket left over. No idea maybe front corner bumper or something.

[@jameskeys971]

Question: with so much experience can you give a list off the top of your head about the best mechanical design for ease of work and in general the best engineered vehicles?

[@WMCS]

VAG engines and BMW. 🍻🍻

[@BillyThomas-p2q]

Hi there Kevin how are you doing mate bise a gen nice to watch you 👍 Billy cars 🚗 ❤😂🎉😢😅

[@WMCS]

🍻🍻🍻

[@gibby2061]

did you have to drain the trans before this?

[@gregj7916]

rain, rain go away come again another day..

[@dennisdatu6464]

Maybe whenever your lying beneath the car about to remove the clutch housing or tranny you can put a padded mat on your chest / abdomen in case it slips. Just a suggestion. Great video as always.

[@WMCS]

Thankyou for the suggestion 🍻🍻

[@telecomsuk]

I’m half way through my TA panda 4x4, I suspect failed DMF, I did at 69 treat my self to a transmission jack and an impact wrench.

[@danielsam67]

No te convendria tener un gazebo plegable para resguardarte un poco de la lluvia?

[@WMCS]

That’s my home what you’re describing..

[@sasacata]

Hi there. Fellow mechanic here. Im truly amazed by your work, nice job. Can i ask how much time did it took for that mobile clutch change?

[@WMCS]

This particular one can be done in 3hrs

[@sasacata]

@@WMCS Thats fast. I like your setup of work as well.

[@rhrh48]

لماذا تضع الشحوم الحمراء في مكان البراغي شكرا اخي

[@tangoone6312]

🚙

[@losavage25]

What kind of clutch centering tool did you use?

[@WMCS]

It’s a laser one. Comes with different attachment sizes

[@NikVkin]

We need to sing - rain, rain, wait...

[@WMCS]

😁🍻

[@Phil-1969]

Hello Kevin , how are you doing and feeling

[@WMCS]

Still not nearly stages of recovery🧘‍♂️💊 Thanks for asking… really appreciate the support 🍻

[@Phil-1969]

@@WMCS your a good KZbin friend, our thoughts are with you and your family, speedy recovery champ

[@GaBi-pg7mm]

Hi, have you ever changed the clutch on a semi-automatic dualogic gearbox?

[@WMCS]

I’ve done a few in my time.

[@GaBi-pg7mm]

@WMCS other than removing the robot, is there any more difficultys? Thanks again for your time.

[@doosanengineer7659]

Any tips for a 2012 kia sportage awd?

[@WMCS]

Subscribe and access channel’s playlist

[@makak_2]

question: VW motor 1.8tsi 180hp is simple flywheel ? or DMF

[@WMCS]

Most likely single mass but there are exceptions sometimes. Subscribe and access full repair videos on the channel’s playlist.

[@Chris_Paul1]

Probably not necessary but u could grab urself one of those stainless steel trays to put most of ur nuts and bolts in.

[@benia1983]

How long does it usually take you to change a single clutch?

[@WMCS]

In average once it’s up on stands. About 3-5hrs. Depending on the job.

[@benia1983]

@WMCS Good. And what do you do when unforeseen circumstances arise, such as a broken or stuck bolt?

[@ferropersona3112]

🎩🎩

[@kamar317]

Hi, have you ever had a problem with an unhappy customer?

[@WMCS]

Truth be told no.. if something goes wrong. I make sure I rectify it at my own cost. If I find things that would affect the end result ie : possible master cylinder fault. I inform customer before hand .. basically know your trade and articulate it clearly to customer. People are generally good and understanding granted you’re honest and clear.

[@kamar317]

@@WMCS 👍👍

[@timothyfinn905]

mind your knees, you will miss them when their gone.

[@WMCS]

Here we go.. another mystic meg ..

[@cecilschelborn5668]

I jus asking why don't u use safety glasses?

[@WMCS]

I’ve never needed to. But doesn’t mean you shouldn’t.

[@malikfaal9742]

Why don’t you get a pop up gazebo when it’s raining 😳

[@RICHARD.WRIGHT1]

You need a Gazebo mate, can't be working in that rain....

[@WMCS]

I did have one once. Cost me more than the job once. The frame scratched the car due to always being windy 🌬️..

[@sm400]

I've had a couple of vans with a tailgate on....a little respite sometimes....used parasols stuck in top of large axle stand sometimes here when gets hot in sun....but with a traumontana these get wrecked pretty quick😂..