2012 Nissan Murano CVT Fluid Change and Filter service

Рет қаралды 9,578

Күн бұрын

Пікірлер: 23

@jemlnlx 4 ай бұрын

Recently did my 2012 Murano at 98k. Purchased with 82k with no history of fluid servicing. Dealership refused to service because I was too close to 100k. Drain and fill went smoothly. 10mm hex was a bit of a pain to get off...but PB Blaster and an extension pipe got it done. 5 quarts came out via drain plug...5 quarts went in via dipstick neck. Fluid was very dark brown...original fluid maybe?! No prior transmission issues or symptoms. Shifts smoothly just as it did before. Also replaced the external filter behind the driver's side wheel...not sure if this was necessary but it was cheap and convenient. Video was helpful!

@CJ_Kraus 4 ай бұрын

Thanks! Yeah I called Nissan and they said not to do it as well and mine has 150k+ but it was acting weird so I went ahead and did it anyway. It seems much better now. And not issue knock on wood 😂. I think the main issue was the external filter on a lot of these. Best to change them for the peace of mind anyways. Cvt fluid needs changed or will destroy the trans from what I read. I’m going to change mine every 18-20k from now on. Probably just a drain and external filter. I’m glad the video helped!

@alain-bu3ho 15 күн бұрын

is it by aspiration on the 2.5 dci year 2012 thank you .

@keving52002 9 ай бұрын

The ATF temp count for this vehicle is 160 on a scan tool . Make sure its at this temp count to level off fluid.

@CJ_Kraus 9 ай бұрын

After I did the video I realized this. I checked it and it’s seems to be smoother now. It’s better than it was before I changed it that’s for sure!

@justintx75 9 ай бұрын

Were did you find the internal filter?

@محمد-ص9غ1ذ 2 ай бұрын

Hi, thanks for this video.. my murano 2012 when I shift the gear from P to R it delay for 4 seconds sometimes when I am using it and I shift from D to R it takes 9 seconds.. Do u think if I replace the oil and the filter would affect my car ?

@CJ_Kraus 2 ай бұрын

Not sure. If it hasn’t been changed it might help to change it.

@Sistagirl305 18 күн бұрын

If you changed the filter and didn't get from dealer, the filter sprout is too long and is preventing fluid from getting into transmission. Either cut it down to one or go buy another one. This delay shifting or vehicle won't move or barely moves.

@XxSOCIALxX Ай бұрын

I did all this same year same everything parts wise and it runs fine fluid is good goes into gear on shifter but doesn’t move at all

@CJ_Kraus Ай бұрын

Dang sorry to hear that. Sometimes I heard even if your baby them they still go bad. I just did mine hoping it will prolong it. Mine might have been changed before but idk that for sure. I don’t drive it everyday either so that helps too. They were just bad cvts.

@XxSOCIALxX Ай бұрын

@ yeah it worked fine before hand so idk

@Sistagirl305 18 күн бұрын

The filter sprout is too long if you bought it anywhere except from the deal. You can cut it or buy from dealer. The oil is not getting into transmission and therefore vehicle won't move. I found out the hard way and moves when I cut the sprout down@@XxSOCIALxX

@Sistagirl305 18 күн бұрын

It's the valve body that sits under the internal filter. Once they get over 100,000 miles or so they can start having issues. Mainly Stepper motor goes out(code p1778) 7:27 It's not the trans. They have to be rebuilt/reman. Never buy one off of EBay and/ or Amazon. I bought mines from Sunbelt Valve Body Rebuilders in Tampa, Florida. Great people there. Vehicle runs fine now.

@XxSOCIALxX 17 күн бұрын

@ thank u that’s what I’m finding out but nice to have confirmation I’m not heading in wrong direction

@prestonsmith243 2 ай бұрын

I’m in the middle of this job, can you send me where you bought the internal screen type filter from, I bought one from autozone but the tube is too long so the pan doesn’t fit back.

@CJ_Kraus 2 ай бұрын

Mine was the same way. You have 2 options either cut the tube off to make it the same size as the old one or clean the old one out with brake clean really good. I cut mine a tad too short and didn’t want to risk it so I just cleaned the old one really well. It came clean pretty easy with break clean and a blower on the air compressor.