Thanks very much for the video, it surely helped me with the brake job. It took several tries but i finally got the instruction down. took me half day to do this brake job and also replaced rotter as well. Again many thanks.
@picarautowerkz5577 жыл бұрын
Dinh Ken Thank you for the appreciation, it helps a ton!😁
@jnew68084 жыл бұрын
Dude dude. Thank you so much man you saved me thousands. Only take my car in once a year for service everything else I do my damn self. Bunch of rip-off artist 👍🏽👍🏽😁😁👏🏽👏🏽
@talk2stop3 жыл бұрын
No one is ripping anyone off. You pay for the knowledge and convenience.
@Bic3ps4Gunz6 ай бұрын
Does this work for a 2014 Range Rover sport hse?! Thanks
@archiemcspinbender47588 жыл бұрын
Thanks so much - you saved the day for me. I didn't know about the parking brake service mode so was struggling with retracting the brake pistons. once in this mode doing the brake pads was a breeze
@picarautowerkz5577 жыл бұрын
Archie Mcspinbender Sry for the late response but Im glad to help you☺️
@ernestgonzalez92086 жыл бұрын
Thanks for this video. Lots of help. Just want to confirm to I did this with the doors close on my 2015 range rover sport hse. And it did in fact work. Again thanks for this
@troystancil45002 жыл бұрын
Is this the same procedure for a 2016 Evoque?
@JayKay-ht8rg5 жыл бұрын
Can you turn the Ignition off, once you’ve got it in Service Mode, to save on the Battery? Great Video. Very helpful. Thanks bro.
@picarautowerkz5575 жыл бұрын
Hi! Thanks! Yes you can.
@JayKay-ht8rg5 жыл бұрын
Thankyou. Much appreciated.
@souheilbouimad99124 жыл бұрын
How can i change the rubber dust boot in Range Rover evoque 2013
@kear39224 жыл бұрын
I also have service required on the dashboard how do I remove it, I’ve had a service but can’t remove it, it also has no service menu on the dashboard 🤔
@benolivas10126 жыл бұрын
do you push them at the same time
@luisjaramillo57716 жыл бұрын
What happens at 1:30 did you have to press the pushstart again ?????
@picarautowerkz5576 жыл бұрын
after you push the start button you need to press and hold the E- brake button so caliper will retract and go to service mode. TY!
@shellshock940T4 жыл бұрын
babyrr.com/forum/Thread-emergency-parking-brake Here is a written procedure for dealing with service mode
@priyeshsingh15459 жыл бұрын
Hi. I'm doing the same.. but not working.. I removed the old brake pads.. and the electronic brake kicked in. now I cannot remove the caliper
@AntonioLopez-xs6pe7 жыл бұрын
Priyesh Singh forget about the 2 seconds and just keep then pressed until brake light is on
@priyeshsingh15457 жыл бұрын
Antonio Lopez thanks bru.. it never work.. I traded that range over a year ago. I have a brand new now.
@MikeManeth5 жыл бұрын
I did the procedure and the brakes retracted, but not far enough to install the new pads. The caliper would not depress, even with caliper tool. Any help appreciated!
@chasermcchaser16687 жыл бұрын
How do you turn the shit off once its on?
@luisjaramillo57716 жыл бұрын
I try this and it did not work please re-due video properly
@RoManArOunD7 жыл бұрын
how do the turn the maintenance mode off now that I am done?
@chasermcchaser16687 жыл бұрын
Did you figure this out? I cant get the thing out of maint. mode. wtf.
@RoManArOunD7 жыл бұрын
Yeah. Just do the same thing as putting it on to take it off..I figured it out..1. ignition on (engine off) 2. Push (not pull) on brake button. 3. Wait 3sec 4. Press all the way down on gas peddle.(while still pressing button) 5. Wait 3 second 6. Turn ignition on (with other hand) and then off (not super fast) 7. If if doesn't go off (take deep breaths) 8. Try again and repeat steps 1-6 9. Be sure not to let off of the brake Button and gas untill the brake motors are done doing its thing. Takes 9 seconds.
@zzparadoxzz5 жыл бұрын
It's same as entering maintenance mode but instead of( push) e brake for 2 seconds it's (pull)
@JayKay-ht8rg5 жыл бұрын
To get out of Maintenance Mode. You do exactly the same as you did to activate Maintenance Mode, EXCEPT you keep the handbrake switch Pushed instead of pulled..