2012 Toyota Tundra with Method NV MR305 & 35” Toyo MT Tires

2012 Toyota Tundra
88ROTORSOFFROAD
Check us out on Instagram @88rotorsoffroad & @88rotors
Mods:
3” Front Strut Spacer
2” Rear Block w/ Extended U-Bolts
18x9 +25 5x150 Method NV MR305 Matte Black
35x12.50R18 Toyo Open Country MT Tires
Body Mount Chop
Fender Liner Trim
Front Skid Plate Trim
Need work done to your truck? Need the best prices on parts? We are located in South El Monte, CA. Give us a call or email.
626-442-3150
[e-mail]

[@Painfulwhale360]

I like the new tundra body’s, but when I see the last gen body there is something that just looks so good about it.

[@jayc4715]

I kinda like these older style ones better

[@SuperDimeguy]

I have a 2011 and a 2019 I think the 2011 is the better truck

[@Painfulwhale360]

SuperDimeguy why is that?

[@SuperDimeguy]

Taylor Albaugh The 2011 has 200000 miles yet feels tighter in the steering, the motor has more power even they are both 5.7s , the suspension feels weaker in 2019 and the body roll is definitely more noticeable in the 2019. I can do burn outs in the 2011. The 2019 doesn’t want to.

[@jacobk.1291]

@@SuperDimeguy try turning traction control off and turn on tow mode in the 2019

[@dantheman9395]

Clean , simply and, excellent!! So no trimming the front bumper Also a new subscriber. Like what I have been seeing so far

[@juanjsolis9284]

Very nice. That Tundra definitely looks a whole lot better.

[@88ROTORS]

Juan J Solis thank you!

[@coreyallen1090]

Nice looking truck! Have my '14 in the shop as we speak getting a fabtech '4 on same size tires. Super stoked

[@88ROTORS]

Post a video when you get it back. Would love to see it!

[@zurk3420]

Can you show your work? Like the before and after body chop mount and how much you had to trim off the fender liner? Looked like the front fender liner was missing. Why not shim out the front bumper? We already know what a Tundra looks like. It would also be better of a full walk around of the truck sitting still as finished. See what you did how the wheels fit etc..

[@tommywattz7]

Wish I was closer to South Carolina I’ll get out of my tundra for me nice work

[@88ROTORS]

Thank you!

[@donovanrussell2497]

Beautiful truck

[@therealsolo23]

I like these better than the 2023. Something about the look of this that i like. And normally i hate chrome on vehicles but i love the chrome parts on these and any 80’s and older cars

[@JohnWaid6Plus]

Love it looks so good

[@jpallen719]

So I just purchased a 2013 Toyota tundra Texas special which has a 3 inch lift kit on it. It has 20 x12.5 I believe with an huge offset. Tire stick way out here 4 inches past the fender. I want to get new tires either 33s or 35s on a smaller rim. These are 5 x 1 50 lug. I like Toyotas and I like the KO2. I’ll like the beefy look, but not one that will rub on the fenders like now. Recommendations? Without making too much modifications?

[@adamsigala1613]

I just put some wheels on mine do i need a spacer to prevent rubbing on the front

[@crazyfish0805]

Does your gear ratio need to change when adding larger tires?

[@Fish-pi6my]

Do you guys do only Toyota Tundra and Tacoma only? Or can you do lifts on Fords, GMC and Silverado too? Just want to know. I'm in the market for a full size truck. Just wondering. Thanks. Love your videos on the lifts. I'm just picturing mine in my head right now. 😁😁😁

[@88ROTORS]

Kevin Lay we do all trucks Kevin. We just have a lot of Toyota guys that we work with but we have experience and have lifted all makes.

[@marcosrivera9112]

I have a 2012 extended cab. I ordered supreme 2 inch spacers. Can I fit 35s? I wish I could see what my setup will look like before buying the tires.

[@ILLWlLL]

More tundra videos please 2021!

[@romeogonzales4272]

So if this was a lift would a 4” lift be good ? On 35s ?

[@hawaiiansoja]

How much are those brake rotors?? Are they available for purchase??

[@mr_showtime9113]

Dose anyone know an estimate on how much it’ll be near for that I got the exact truck trying to do the same thing looks so nice

[@dustyhiebert5748]

Hi y’all, not sure if this comment will be seen or replied to but I bought a 2019 Tundra that appears to already have a leveling kit as well as air bag suspension in the rear. The tires that came on the truck from dealership are 35x12.5R18 Cooper Discoverer STT Maxx. There has not been a body mount chop and the front plastic panels do not appear to have been modified at all. I haven’t heard any rubbing since I’ve owned the truck for 5 months now. Can anyone tell me why I’m able to run 35’s on my truck? Any advice is appreciated as I just bought a set of 35x12.5 Ridge Grapplers I’m hoping to swap out the Coopers with before winter.

[@Mina-vt2si]

@2:20 : That's the frame you are trimming !!

[@fouUili684]

my kind of style with the wheels and tires, I love you guy's videos. What program do you use to edit your videos?

[@88ROTORS]

Hema Nigansz thank you! Old version of Sony Vegas

[@kike510mig]

How much did the labor cost?

[@icesmooth31]

cam i but 305/55R20 on a 2013 tundra 4.6l v8 with a 3 inch lift kit without cutting anything?

[@justinperry9754]

What's the overall height after the lift and everything? I wanna get something like this done on my Tundra but I wanna make sure it still fits in my garage! Lol

[@romeogonzales4272]

Did you ever figure it out ?

[@quentinhill2347]

How close is this setup to the upper control arms with +25 offset?, i was under the impression that you couldent run 35x12.5r18s with anything more than +18 offset without rubbing the UCA's

[@blackwaterlotus8124]

I'm sure you found your answer somewhere by now but, stock Tundra SR5 wheels are 60+ offset. So if the wheels they installed are 25+, 18+ is fine. At the time you asked this, your concept was actually correct, except the factor was reversed. The higher the offset number(+) the closer to the UCA. The smaller the offset number (-) the further out from the UCA.

[@jamespeng5959]

Do you know any coilover shocks that will fit my 2014 Tundra with a 5inch zone lift?

[@88ROTORS]

Custom Kings will be your best bet. Let me know if you need them priced, contact us via email. [e-mail]

[@JakeKubarii]

Hi I have a 2010 Tundra crewman just like this. How much would the set like this cost for my truck?

[@88ROTORS]

Jake Kubarii Please contact us by phone or e-mail for quotes. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at [e-mail]. Thank you for your interest in our products/services!

[@tribunation]

+25 offset?

[@henrychuong2500]

Do you guys know if with bilstein 5100 set to 2.5" of lift will fit 35x12.5r17 0 offset? (with BMC and fender mod of course.)

[@88ROTORS]

Henry Chuong what width wheel? Offset doesn’t mean or tell anything with a wheel width to explain the offset number

[@henrychuong2500]

Wheel width of 8.5. Thanks for the response.

[@gtochevelle]

Did you need to re-gear after running 35" tires?

[@YGSnB]

How much yall charge for a body mount chop?

[@88ROTORS]

London B. Please contact us by phone or e-mail for quotes. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at [e-mail]. Thank you for your interest in our products/services!

[@eee123rwf]

Doing my. Part

[@chrismed1109]

Can you recommend a shop in northern Virginia?

[@jimxiong3815]

Nice but man why mud tires? 99% of the time it’s gonna be on pavement 🤮🤮🤮

[@coryibarra753]

You need to let people know that is not a lift kit is a leveling kit a spacer on top of the strut mount A lift kit consists of a lower drop down bracket and bigger spindles with extended brake lines if people do that there will be no need to cut up your body mount or skid plate absolutely stupid. 33 is you'll best way to go technically then you don't clear 35s but hey that's my opinion got to be an idiot to cuting up a $40,000 truck